RS1006M

RS1001M THRU RS1007M SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 10 Amperes FEATURES Low leakage Low forward voltage Mounting position : Any Surge overload rating: 200 Amperes peak Ideal for printed circuit boards MSL: Level 1 .057 (1.45) .041 (1.05) .083 (2.1) .069 (1.7) .098 (2.5) .146 ( 3.7 ) .130 ( 3.3 ) .708 ( 18.0 ) .669 ( 17.0 ) .074 (1.9) .059 (1.5) .114 (2.9) .043 (1.1) .035 (0.9) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS .122 (3 .1 ) .157 ( 4 ) * UL listed the recognized component directory, file #E94233 * Epoxy: Device has UL flammability classification 94V-O f.134 ( 3.4 ) MECHANICAL DATA .189 (4.8) .173 (4.4) .150 (3.8) .134 (3.4) .366 (9 .3 ) .995 (25.3) .983 (24.7) .382 (9 .7 ) RS-10M .602 (15.3 ) .578 (14.7) * * * * * * .031 (0.8) .023 (0.6) O Ratings at 25 C ambient temperature unless otherwise specified. resistive or inductive load. .303 (7.7) .287 (7.3) .303 (7.7) .287 (7.3) .303 (7.7) .287 (7.3) Dimensions in inches and (millimeters) o MAXIMUM CHARACTERISTICS ( @ TA = 25 C unless otherwise noted ) CHARACTERISTICS SYMBOL RS1001M RS1002M RS1003M RS1004M RS1005M RS1006M RS1007M UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Bridge Input Voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 Volts Maximum Average Forward Rectified Output Current at Tc=100 degree with heatsink IO 10 Amps Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load IFSM 200 Amps Typical Current Square Time I 2T 166 A 2S Insulation voltage Viso 3000 Volts Typical Thermal Resistance from junction to ambient R1JA 22 Typical Thermal Resistance from junction to case R1JC 1.0 TJ,TSTG -55 to + 150 O C/W Operating and Storage Temperature Range O C o ELECTRICAL CHARACTERISTICS ( @ TA = 25 C unless otherwise noted ) CHARACTERISTICS Maximum Forward Voltage Drop per element at 5.0A DC SYMBOL 烏TA=25 OC 烏TA=125 OC VF Note: " ROHS compliant". 烏TA=25 C 烏TA=125 OC 1.1 Volts 0.98 O Maximum Reverse Current at Rated DC Blocking Voltage per element RS1001M RS1002M RS1003M RS1004M RS1005M RS1006M RS1007M UNITS IR 5.0 30 MAmps MAmps 2019-08 REV: D 100 TA = 125 OC 10 1.0 0.1 TA = 25 OC = 0 40 20 60 80 100 140 120 300 sine wave IFSM 1000 PEAK FORWARD SURGE CURRENT, (A) INSTANTANEOUS REVERSE CURRENT, (uA) RATING AND CHARACTERISTICS CURVES ( RS1001M THRU RS1007M ) 0 8.3ms 8.3ms 1 cycle non-repetitive o Tj=25 C 200 100 0 1 2 5 PERCENT RATED PEAK REVERSE VOLTAGE, (%) 4 Tc AVERAGE FORWARD CURRENT, (A) heatsink Tc 8 6 sine wave R-load on heatsink 4 2 80 90 100 110 120 130 CASE TEMPERATURE 140 150 160 3 P.C.B soldering land 5mmf sine wave R-load free in air 2 1 0 0 40 C 1.3 1.2 1.1 4 5 6 7 MOUNTING RORQUE (Kg.cm) FIG.5 . CONTACT THERMAL RESISTANCE 8 INSTANTANEOUS FORWARD CURRENT, (A) THERMAL RESISTANCE (oC/W) 1.4 3 120 160 FIG.4 . TYPICAL FORWARD CURRENT DERATING I CURVE with thermal compound 2 80 AMBIENT TEMPERATURE( C) 1.5 1 100 on glass-epoxi substrate FIG.3 . TYPICAL FORWARD CURRENT DERATING CURVE 1.6 50 o 0 20 FIG..2 MAXIMUM NON--REPETITIVE FORWARD SURGE CURRENT o AVERAGE FORWARD CURRENT, (A) FIG..1 MAXIMUM REVERSE CHARACTERISTICS 10 10 NUMBER OF CYCLE AT 60Hz 40 10 4.0 TA =125OC TA =25OC 1.0 0.4 0.1 0.6 Pulse Width = 300mS 1% Duty Cycle 0.7 0.8 0.9 1.0 1.1 INSTANTANEOUS FORWARD VOLTAGE, (V) FIG.6 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 1.2 1.3 Marking Description Rectron Logo RS100XM Plant - code UL Logo Year – code (Y: Last digit of year & A:2010, B:2011…..) Part No. Voltage-code V Y WW Week – code (WW: 01~52) 1-------50V 2-------100V 3-------200V 4-------400V 5-------600V 6-------800V 7-------1000V PACKAGING OF DIODE AND BRIDGE RECTIFIERS TUBE PACK PACKAGE PACKING CODE EA PER BOX INNER BOX SIZE CARTON SIZE EA PER CARTON WEIGHT(Kg) RS-4M/-10M -C 900 540*118*118 560*259*144 1,800 12.82 (mm) (mm) DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.