RS106

RECTRON SEMICONDUCTOR TECHNICAL SPECIFICATION RS101 THRU RS107 SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere FEATURES * * * * * Low cost Low leakage Low forward voltage Mounting position: Any Weight: 1.26 grams RS-1 .414 (10.5) .374 (9.5) .360 (9.1) .320 (8.1) MECHANICAL DATA * UL listed the recognized component directory, file #E94233 * Epoxy: Device has UL flammability classification 94V-O AC .035 (0.9) DIA .028 (0.7) TYP. .390 MIN. (9.9) .160 (4.1) SPACING .140 (3.6) .650 (16.5) .610 (15.5) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. .050 (1.27) .161 (4.1) .150 (3.8) Dimensions in inches and (millimeters) MAXIMUM RATINGS ( At TA = 2 5oC unless otherwise noted) RATINGS Maximum Recurrent Peak Reverse Voltage Maximum RMS Bridge Input Voltage Maximum DC Blocking Voltage Maximum Average Forward Output Current at T A = 5 0o C Peak Forward Surge Current, 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Thermal Resistance from junction to ambient Typical Thermal Resistance from junction to case Operating Temperature Range Storage Temperature Range ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted) CHARACTERISTICS Maximum Forward Voltage Drop per Bridge Element at 1.0A DC Maximum Reverse Current at Rated DC Blocking Voltage per element @T A = 2 5 o C @T A = 1 00 o C SYMBOL VF RS101 RS102 RS103 RS104 1.0 5.0 IR 1 RS105 RS106 RS107 UNITS Volts uAmps mAmps 2005-3 REV: A RθJA RθJC TJ T STG 50 0 SYMBOL VRRM VRMS VDC IO I FSM RS101 50 35 50 RS102 100 70 100 RS103 200 140 200 RS104 400 280 400 1.0 30 RS105 600 420 600 RS106 800 560 800 RS107 1000 700 1000 UNITS Volts Volts Volts Amps Amps 15 -55 to + 150 -55 to + 150 C/W 0 0 C C Note: “Fully ROHS compliant”, “100% Sn plating (Pb-free)”. RATING AND CHARACTERISTIC CURVES ( RS101 THRU RS107 ) FIG. 3 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 30 8.3ms Single Half Sine-Wave (JEDED Method) PEAK FORWARD SURGE CURRENT, (A) AVERAGE FORWARD CURRENT, (A) FIG. 2 - TYPICAL FORWARD CURRENT DERATING CURVE 1.0 .8 .6 .4 .2 0 0 30 60 90 120 150 180 AMBIENT TEMPERATURE, ( 210 ) 60 Hz RESISTIVE OR INDUCTIVE LOAD 20 10 0 1 2 4 6 8 10 20 40 60 NUMBER OF CYCLES AT 60Hz 100 FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT, (A) FIG. 4 - TYPICAL REVERSE CHARACTERISTICS 10 20 10 INSTANTANEOUS REVERSE CURRENT, (uA) 1.0 1.0 .1 TJ = 25 Pulse Width = 300us 1% Duty Cycle TJ = 25 0.1 .01 .4 .6 .8 1.0 1.2 1.4 INSTANTANEOUS FORWARD VOLTAGE, (V) .01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) RECTRON