RS1501M

RS1501M THRU RS1507M SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 15 Amperes FEATURES Low leakage Low forward voltage Surge overload rating : 250 amperes peak Mounting position: Any Ideal for printed circuit boards High forward surge current capability RS-15M .189 (4.8) .173 (4.4) MECHANICAL DATA .087 (2.2) .071 (1.8) .126 (3.2) .800 (20.3) .775 (19.7) .197 (5) .165 (4.2) .150 (3.8) .106 (2.7) .096 (2.3) .114 (2.9) .098 (2.5) .708 (18.0) .669 (17.0) * Epoxy: Device has UL flammability classification 94V-O * UL list the recognized component directory,file #E94233 f .138 (3.5) .150 (3.8) .134 (3.4) 1.193 (30.3) 1.169 (29.7) .441 (11.2) .425 (10.8) * * * * * * MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS .031 (0.8) .023 (0.6) .043 (1.1) .035 (0.9) Ratings at 25 o C ambient temperature unless otherwise specified. resistive or inductive load. .402 (10.2) .303 (7.7) .303 (7.7) .386 (9.8) .287 (7.3) .287 (7.3) Dimensions in inches and (millimeters) MAXIMUM RATINGS•(@ • TA=25 OC unless otherwise noted) SYMBOL RATINGS RS1501M RS1502M RS1503M RS1504M RS1505M RS1506M RS1507M UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts VDC 50 100 200 400 600 800 1000 Volts Maximum DC Blocking Voltage Maximum Average Forward Rectified Current o at T C = 100 C Volts IO 15 Amps Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) I FSM 250 Amps Typical Current Squared Time 2 IT 259.3 A2S Viso 3000 Volts Insulation voltage Typical Thermal Resistance (Note 1) Operating and Storage Temperature Range R 1J C 1.5 R 1J A 22 T J, T STG -55 to + 150 0 C/ W 0 C • A=25 OC unless otherwise noted) ELECTRICAL CHARACTERISTICS•(@T CHARACTERISTICS Maximum Instantaneous Forward Voltage at 7.5A DC Maximum DC Reverse Current at Rated DC Blocking Voltage @T A = 25 o C @T A = 150 o C SYMBOL VF IR NOTES : 1. Thermal Resistance : Heat-sink case mounted or if PCB mounted. 2. " ROHS compliant" RS1501M RS1502M RS1503M RS1504M RS1505M RS1506M RS1507M 1.05 UNITS Volts 0.5 500 uAmps 2019-06 REV:D 30 20 10 5 2 1 0.5 0.2 0 Pulse test per one diode 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 INSTANTANEOUS REVERSE CURRENT, (MA) INSTANTANEOUS FORWARD CURRENT, (A) RATINGANDCHARACTERISTICSCURVES(RS1501M THRU RS1507M) 10000 O TA =150 C 1000 100 1.0 O TA = 25 C 0.1 0 AVERAGE FORWARD CURRENT, (A) IFSM PEAK FORWARD SURGE CURRENT, (A) sine wave 0 8.3ms 200 1 cycle non-repetitive Tj=25 100 1 5 2 10 20 100 120 140 FIG.2 MAXIMUM REVERSE CHARACTERISTICS 50 3 P.C.B soldering land 5mmf sine wave R-load free in air 2 1 0 100 on glass-epoxi substrate 0 40 80 120 160 AMBIENT TEMPERATURE, (OC) NUMBER OF CYCLE FIG.4 TYPICAL FORWARD CURRENT DERATING CURVE FIG.3 SURGE FORWARD CURRENT CAPABILITY 15 1.2 THERMAL RESISTANCE (OC/W) AVERAGE FORWARD CURRENT, (A) 80 4 300 12 9 heatsink Tc Tc 6 3 sine wave R-load on heatsink 0 10 60 PERCENT RATED PEAK REVERSE VOLTAGE, (%) INSTANTANEOUS FORWARD VOLTAGE, (V) FIG.1 MAXIMUM INSTANTANEOUS FORWARD CHARACTERITICS 0 40 20 30 50 70 90 110 130 150 HEAT SINK TEMPERATURE, (OC) FIG.5 TYPICAL FORWARD CURRENT DERATING CURVE 170 with thermal compound 1.0 0.8 0.6 0.4 0.2 0 2 3 4 5 6 7 MOUNTING TORQUE (kg.cm) FIG.6 CONTACT THERMAL RESISTANCE fcf 8 Marking Description Rectron Logo RS150XM Part No. Voltage-code UL Logo V Y WW Year – code: (Y:Last digit of year) Week – code: (WW:01~52) 1-------50V 2-------100V 5-------600V 6-------800V 3-------200V 4-------400V 7-------1000V PACKAGING OF DIODE AND BRIDGE RECTIFIERS BULK PACK PACKAGE PACKING CODE RS-15M -B EA PER BOX 300 INNER BOX SIZE CARTON SIZE (mm) (mm) EA PER CARTON GROSS WEIGHT(Kg) 230*190*46 410*243*157 1,800 13.37 eg(TYPE):RS1507M-B TUBE PACK PACKAGE PACKING CODE EA PER BOX INNER BOX SIZE CARTON SIZE EA PER CARTON WEIGHT(Kg) RS-15M -C 600 490*135*110 510*293*131 1,200 13.12 eg(TYPE):RS1507M-C (mm) (mm) DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.