RS207M

RECTRON SEMICONDUCTOR TECHNICAL SPECIFICATION RS201M THRU RS207M SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 2.0 Ampere FEATURES * Ideal for printed circuit board * Mounting position: Any MECHANICAL DATA * UL listed the recognized component directory, file #E94233 * Epoxy: Device has UL flammability classification 94V-O .807 (20.5) .768 (19.5) .453 (11.5) .413 (10.5) RS-2M .146 (3.7) .130 (3.3) (2.7) (2.3) (18.8) (17.8) .079 (2.0) .063 (1.6) .098 (2.5) .083 (2.1) .043 (1.1) .035 (0.9) .047 (1.2) .031 (0.8) .024 (0.6) .016 (0.4) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. .209 (5.3) .209 (5.3) .193 (4.9) .193 (4.9) .209 (5.3) .193 (4.9) Dimensions in inches and (millimeters) MAXIMUM RATINGS ( At TA = 2 5oC unless otherwise noted) RATINGS Maximum Recurrent Peak Reverse Voltage Maximum RMS Bridge Input Voltage Maximum DC Blocking Voltage Maximum Average Forward Output Current T A = 5 0 oC Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Junction Capacitance (Note1) Typical Thermal Resistance per leg (NOTE 2) (NOTE 3) Operating Temperature Range Storage Temperature Range ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted) CHARACTERISTICS Maximum Forward Voltage Drop per Bridgeat Element at 2.0A DC Maximum Reverse Current at Rated Dc Blocking Voltage per element @T A = 2 5 C @T A = 1 00 o C o SYMBOL VRRM VRMS VDC IO I FSM CJ R θJA RθJC TJ T STG RS201M RS202M RS203M RS204M RS205M RS206M RS207M UNITS 50 35 50 100 70 100 200 140 200 400 280 400 2.0 50 15 37 11 -55 to + 150 -55 to + 150 0 0 0 .106 .091 .740 .701 600 420 600 800 560 800 1000 700 1000 Volts Volts Volts Amps Amps pF C/W C C SYMBOL VF IR RS201M RS202M RS203M RS204M RS205M RS206M RS207M UNITS 1.1 5.0 0.5 Volts uAmps mAmps 2005-3 REV:A NOTES : 1.Measured at 1 MHZ and applied reverse voltage of 4.0 volts 2. Unit case mounted on 1.6 x 1.6 x 0.06” thick (4.0 x 4.0 x 0.15cm) Al. Plate 3. Units mounted on P.C.B. with 0.5 x 0.5” (12 x 12mm) copper pads and 0.375” (9.5mm) lead length 4. “Fully ROHS compliant”, “100% Sn plating (Pb-free)”. RATING AND CHARACTERISTIC CURVES ( RS201M THRU RS207M ) FIG. 1 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT, (A) FIG. 2 - TYPICAL FORWARD CURRENT DERATING CURVE 2.0 AVERAGE FORWARD CURRENT, (A) 60 50 8.3ms Single Half Sine-Wave (JEDED Method) 1.5 40 30 1.0 20 .5 10 0 0 2 4 6 10 20 40 60 NUMBER OF CYCLES AT 60Hz 100 60 Hz RESISTIVE OR INDUCTIVE LOAD 0 20 50 80 110 140 170 200 AMBIENT TEMPERATURE, ( ) FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT, (uA) INSTANTANEOUS FORWARD CURRENT, (A) FIG. 4 - TYPICAL REVERSE CHARACTERISTICS 10 6 4 2 1.0 .6 TJ = 25 10 1.0 .2 .1 .06 .02 .01 0 20 40 60 80 100 120 140 0.1 TJ = 25 Pulse Width = 300us 1% Duty Cycle .01 .4 .5 .6 .7 .8 .9 1.0 1.1 1.2 INSTANTANEOUS FORWARD VOLTAGE, (V) PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) RECTRON