RS2508M

RS2508 M SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 1200 Volts CURRENT 25 Amperes FEATURES * * * * * * Low leakage Low forward voltage Mounting position: Any Surge overload rating: 300 amperes peak Ideal for printed cikcuit boakds High forward surge current capability RS-25M MECHANICAL DATA .189 ( 4.8 ) .173 ( 4.4 ) .087 (2.2 ) .071 (1.8 ) f.138 ( 3.5 ) .126 ( 3.2 ) .441 (11.2 ) .425 (10.8 ) .197 ( 5 ) .165 (4.2 ) .150 (3.8 ) .106 (2.7 ) .096 (2.3 ) .800 (20.3 ) .775 (19.7 ) .150 ( 3.8 ) .134 ( 3.4 ) 1.193 ( 30.3 ) 1.169 ( 29.7 ) .708 (18.0 ) .669 (17.0 ) * Epoxy: Device has UL flammability classification 94V-O * UL list the recognized component directory, file #E94233 .114 (2.9 ) .098 (2.5 ) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. .031 (0.8 ) .023 (0.6 ) .043 (1.1 ) .035 (0.9 ) .402 (10.2 ) .303 (7.7 ) .303 (7.7 ) .386 (9.8 ) .287 (7.3 ) .287 (7.3 ) Dimensions in inches and (millimeters) MAXIMUM RATINGS•(@ • TA=25 OC unless otherwise noted) SYMBOL RS2508M Maximum Recurrent Peak Reverse Voltage VRRM 1200 Volts Maximum RMS Voltage VRMS 840 Volts VDC 1200 Volts IO 25 4.3 Amps I FSM 300 Amps RATINGS Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at T C=55 OC with heatsink without heatsink Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) UNITS I t 2 373.3 A S Viso 3000 Volts Typical Thermal Resistance (Note 1) R 1J C 1.0 0 C/W Typical Thermal Resistance (Note 1) R 1J A 22 0 C/W TJ 150 0 C T STG -55 to + 150 0 C Typical Current Squared Time Insulation voltage Operating Temperature Range Storage Temperature Range 2 ELECTRICAL CHARACTERISTICS•(@T • A=25 OC unless otherwise noted) CHARACTERISTICS Maximum Forward Voltage at 12.5A DC SYMBOL RS2508M VF 1.05 Volts IR 0.5 200 uAmps uAmps o Maximum DC Average Reverse Current at @T A = 25 C o Rated DC Blocking Voltage @T A = 125 C NOTES : 1. Thermal resistance : Heat-sink case mounted. 2 . “Fully ROHS compliant”, “100% Sn plating (Pb-free)”. UNITS 2017-11 REV:O 30 20 60 10 50 POWER DISSIPATION, (W) INSTANTANEOUS FORWARD CURRENT, (A) RATING AND CHARACTERISTICS CURVES (RS2508 M ) 5 TC= 25 OC 2 1 0.5 0.2 0 Pulse test per one diode 0.2 0.4 0.6 0.8 1 1.2 1.4 40 30 20 10 0 1.6 sine wave T J = 150 OC 0 INSTANTANEOUS FORWARD VOLTAGE, (V) 4 8.3ms 200 1 cycle non-repetitive Tj=25 20 24 100 1 5 2 10 20 50 4 P.C.B 2 1 100 on glass-epoxi substrate 3 soldering land 5mmf sine wave R-load free in air 80 40 0 120 160 AMBIENT TEMPERATURE, (OC) NUMBER OF CYCLE FIG 4 TYPICAL FORWARD CURRENT DERATING CURVE FIG 3 SURGE FORWARD CURRENT CAPABILITY 25 1.2 heatsink Tc Tc THERMAL RESISTANCE (OC/W) AVERAGE FORWARD CURRENT, (A) 16 FIG.2 POWER DISSIPATION AVERAGE FORWARD CURRENT, (A) sine wave 0 20 15 sine wave R-load on heatsink 10 5 0 10 12 5 300 IFSM PEAK FO RWARD SURGE CURRENT, (A) FIG.1 MAXIMUM INSTANTANEOUS FORWARD CHARACTERITICS 0 8 AVERAGE RECTIFIED FORWARD CURRENT, (A) 30 50 70 90 110 130 150 HEAT SINK TEMPERATURE, (OC) FIG 5 TYPICAL FORWARD CURRENT DERATING CURVE 170 with thermal compound 1.0 0.8 0.6 0.4 0.2 0 2 3 4 5 6 7 MOUNTING TORQUE (kg.cm) FIG 6 CONTACT THERMAL RESISTANCE fcf 8 Marking Description Rectron Logo UL Logo RS250XM V Y WW Year – code: (Y:Last digit of year) Week – code: (WW:01~52) Part No. Voltage-code 8-------1200V PACKAGING OF DIODE AND BRIDGE RECTIFIERS BULK PACK PACKAGE PACKING CODE RS-25M -B EA PER BOX 300 INNER BOX SIZE CARTON SIZE (mm) (mm) EA PER CARTON GROSS WEIGHT(Kg) 230*190*46 410*243*157 1,800 13.37 EA PER CARTON WEIGHT(Kg) 1,200 13.12 TUBE PACK PACKAGE PACKING CODE EA PER BOX INNER BOX SIZE CARTON SIZE (mm) (mm) RS-25M -C 600 490*135*110 510*293*131 DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.