RS606

RS601 THRU RS607 SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 6.0 Amperes FEATURES * * * * * Silver-plated copper leads Surge overload rating: 150 amperes peak Low leakage Mounting position: Any Low forward voltage RS-6 .15 x .23L (3.8 x 5.7L ) HOLE THRU .935 (23.7 ) .895 (22.7 ) MECHANICAL DATA .300 (7.5 ) * Epoxy: Device has UL flammability classification 94V-O * UL listed the recognized component directory,file #94233 .700 (17.8 ) .600 (16.8 ) .780 (19. 8) .740 (18. 8) AC .905 MIN. (23.0 ) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS .138(3.5) Ratings at 25 o C ambient temperature unless otherwise specified. .071(1.8 ˅ 1.10 MIN. (28.0 ) .052 (1.3 ) DIA. .048 (1.2 )TYP .220 (5.6 ) .180 (4.6 ) .280 (7.1 ) .242 (6.1 ) resistive or inductive load. Dimensions in inches and (millimeters) MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted) SYMBOL RS601 RS602 RS603 RS604 RS605 RS606 RS607 UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts VDC 50 100 200 400 600 800 1000 Volts RATINGS Maximum DC Blocking Voltage Maximum Average Forward Rectified Current o at T C = 75 C Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) IO 6.0 Amps I FSM 150 Amps I T 93.3 2 A /Sec 2 Current Squarad Time Typical Thermal Resistance (Note 1) Operating and Storage Temperature Range R 1JC 3.1 R 1JA 8.6 TJ, T STG -55 to + 150 0 C/ W 0 C ELECTRICAL CHARACTERISTICS(@TA=25 OC unless otherwise noted) CHARACTERISTICS SYMBOL Maximum Instantaneous Forward Voltage at 6.0A DC Maximum DC Reverse Current at Rated DC Blocking Voltage @T A = 25 o C o @T A =150 C VF IR NOTES : 1. Thermal Resistance : Heat-sink case mounted or if PCB mounted. 2."ROHS compliant". 3. Measureed at 1MHz and applied reverse voltage of 4.0 volts. RS601 RS602 RS603 RS604 1.05 RS605 RS606 RS607 UNITS Volts 0.5 500 uAmps 2021-07 REV:E 30 20 10 5 2 1 0.5 0.2 0 Pulse test per one diode 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 INSTANTANEOUS REVERSE CURRENT, (MA) INSTANTANEOUS FORWARD CURRENT, (A) RATING AND CHARACTERISTICS CURVES ( RS601 THRU RS607 ) 10000 O TA =150 C 1000 100 1.0 0.1 O TA = 25 C 0 INSTANTANEOUS FORWARD VOLTAGE, (V) 60 80 100 120 140 FIG.2 MAXIMUM REVERSE CHARACTERISTICS 9 300 AVERAGE FORWARD CURRENT, (A) sine wave IFSM PEAK FORWARD SURGE CURRENT, (A) 40 PERCENT RATED PEAK REVERSE VOLTAGE, (%) FIG.1 MAXIMUM INSTANTANEOUS FORWARD CHARACTERITICS 0 8.3ms 8.3ms 200 1 cycle non-repetitive Tj=25 100 0 20 1 2 5 10 20 50 100 NUMBER OF CYCLE FIG.3 SURGE FORWARD CURRENT CAPABILITY 8 7 6 heatsink 5 4 3 sine wave R-load on heatsink 2 1 0 0 25 50 75 100 125 150 CASE TEMPERATURE, (OC) FIG.4 TYPICAL FORWARD CURRENT DERATING CURVE 175 Marking Description Rectron Logo UL Logo Year – code (Y:Last digit of year) RS607 Part No. Voltage-code 7---for all Voltage range VYWW - AC + Week – code ˄WW:01~52˅ PACKAGING OF DIODE AND BRIDGE RECTIFIERS BULK PACK PACKAGE PACKING CODE RS-6/RS-8 -B EA PER BOX 400 INNER BOX SIZE CARTON SIZE (mm) (mm) 214*235*56 435*245*186 EA PER CARTON 2,400 GROSS WEIGHT(Kg) 16.0 DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.