RS804

RS801 THRU RS807 SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 8.0 Amperes FEATURES * * * * * * Ideal for printed circuit board Surge overload rating: 250 amperes peak Low leakage Mounting position: Any Low forward voltage High forward surge current capability RS-8 MECHANICAL DATA .15 x .23L (3.8 x 5.7L ) HOLE THRU .935 (23.7 ) .895 (22.7 ) Epoxy: Device has UL flammability classification 94V-O UL listed the recognized component directory,file #94233 .300 (7.5 ) .728 (18.5 ) .600 (16.8 ) .780 (19. 8) .740 (18. 8) AC .787 MIN. (20.0 ) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS 1.063 MIN. (27.0 ) .052 (1.3 ) DIA. .048 (1.2 )TYP .220 (5.6 ) .180 (4.6 ) .138(3.5) Ratings at 25 O C ambient temperature unless otherwise specified. .071(1.8 ˅ resistive or inductive load. .280 (7.1 ) .242 (6.1 ) Dimensions in inches and (millimeters) MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted) SYMBOL RS801 RS802 RS803 RS804 RS805 RS806 RS807 UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts VDC 50 100 200 400 600 800 1000 Volts RATINGS Maximum DC Blocking Voltage Maximum Average Forward Rectified Current o at T C = 75 C IO 8.0 Amps Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) I FSM 250 Amps Current Squarad Time I2T 259.2 2 A /Sec Typical Thermal Resistance (Note 1) Operating and Storage Temperature Range R 1JC 7 R 1JA 18 TJ, T STG -55 to + 150 0 C/ W 0 C ELECTRICAL CHARACTERISTICS (@TA=25 C unless otherwise noted) O CHARACTERISTICS Maximum Instantaneous Forward Voltage at 8.0A DC Maximum DC Reverse Current at Rated DC Blocking Voltage @T A = 25 o C o @T A = 100 C SYMBOL VF IR NOTES : 1. Thermal Resistance : Heat-sink case mounted or if PCB mounted. 2. " ROHS compliant". 3. Measureed at 1MHz and applied reverse voltage of 4.0 volts. RS801 RS802 RS803 RS804 1.2 RS805 RS806 RS807 UNITS Volts 5.0 200 uAmps 2021-08 REV:F 28 30 20 sine wave TJ = 150 OC 24 5 POWER DISSIPATION, (W) 10 TC= 150 OC (TYP) TC= 25 OC (TYP) 2 1 0.5 0.2 0.2 0.4 0.6 0.8 1 1.2 1.4 12 8 0 2 4 6 8 10 12 INSTANTANEOUS FORWARD VOLTAGE, (V) AVERAGE RECTIFIED FORWARD CURRENT, (A) FIG.1 TYPICAL INSTANTANEOUS FORWARD CHARACTERITICS FIG.2 POWER DISSIPATION 14 9 300 sine wave IFSM 0 8.3ms 8.3ms 200 1 cycle non-repetitive Tj=25 100 0 16 0 1.6 AVERAGE FORWARD CURRENT, (A) 0 20 4 Pulse test per one diode 0 1 2 5 10 20 50 8 7 6 4 3 sine wave R-load on heatsink 2 1 0 100 heatsink 5 0 25 50 75 100 125 150 CASE TEMPERATURE, (OC) NUMBER OF CYCLE FIG.4 TYPICAL FORWARD CURRENT DERATING CURVE FIG.3 SURGE FORWARD CURRENT CAPABILITY INSTANTANEOUS REVERSE CURRENT, (uA) PEAK FORWARD SURGE CURRENT, (A) INSTANTANEOUS FORWARD CURRENT, (A) RATING AND CHARACTERISTICS CURVES ( RS801 THRU RS807 ) 1000 O TA = 100 C 100 10 1 O TA = 25 C 0.1 0 20 40 60 80 100 120 140 PERCENT RATED PEAK REVERSE VOLTAGE, (%) FIG.5 TYPICAL REVERSE CHARACTERISTICS 175 Marking Description Rectron Logo RS807 Part No. Voltage-code UL Logo Year – code (Y: Last digit of year & A:2010,B:2011……) VYWW AC 7---for all Voltage range Week – code + (WW:01~52) PACKAGING OF DIODE AND BRIDGE RECTIFIERS BULK PACK PACKAGE PACKING CODE RS-6/RS-8 -B EA PER BOX 400 INNER BOX SIZE (mm) 214*235*56 CARTON SIZE (mm) 435*245*186 EA PER CARTON 2,400 GROSS WEIGHT(Kg) 16.0 DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.