RS806M

RS801M THRU RS807M SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 8.0 Amperes FEATURES * * * * * * Low leakage Low forward voltage Surge overload rating : 200 amperes peak Mounting position: Any Ideal for printed circuit boards High forward surge current capability RS-8M .189 (4.8) .173 (4.4) MECHANICAL DATA f. .138 (3.5) .126 (3.2) .197 (5.0) .425 (10.8) .114 (2.9) .098 (2.5) .165 (4.2) .150 (3.8) .708 (18.0) .669 (17.0) .106 (2.7) .096 (2.3) .800 (20.3) .775 (19.7) 1.193 (30.3) 1.169 (29.7) * Epoxy: Device has UL flammability classification 94V-O * UL list the recognized component directory,file #E94233 .441 (11.2) .150 (3.8) .134 (3.4) .087 (2.2) .071 (1.8) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS .031 (0.8) .023 (0.6) .043 (1.1) .035 (0.9) Ratings at 25 o C ambient temperature unless otherwise specified. resistive or inductive load. .402 (10.2) .303 (7.7) .303 (7.7) .386 (9.8) .287 (7.3) .287 (7.3) Dimensions in inches and (millimeters) MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted) SYMBOL RS801M RS802M RS803M RS806M RS807M Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts VDC 50 100 200 400 600 800 1000 Volts RATINGS Maximum DC Blocking Voltage Maximum Average Forward Rectified Current o at T C = 75 C (with heat sink) RS804M RS805M UNITS IO 8.0 Amps Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) I FSM 200 Amps Current Squarad Time I T 165.9 2 A /Sec Vac 2 RMS isolation voltage from case to lead Typical Thermal Resistance (Note 1) Operating and Storage Temperature Range Viso 3000 R 1JC 3.4 R 1JA 26 T J, T STG -55 to + 150 0 C/ W 0 C ELECTRICAL CHARACTERISTICS (@TA=25 OC unless otherwise noted) CHARACTERISTICS SYMBOL Maximum Instantaneous Forward Voltage at 8.0A DC Maximum DC Reverse Current at Rated DC Blocking Voltage @T A = 25 o C o @T A =150 C VF IR NOTES : 1. Thermal Resistance : Heat-sink case mounted or if PCB mounted. 2."ROHScompliant". RS801M RS802M RS803M RS804M RS805M 1.05 RS806M RS807M UNITS Volts 0.5 500 uAmps 2019-06 REV:C 30 20 28 POWER DISSIPATION, (W) 10 5 2 1 0.5 0.2 0.2 0.4 0.6 0.8 1 1.2 1.4 20 16 12 8 0 1.6 0 2 4 8 10 12 AVERAGE RECTIFIED FORWARD CURRENT, (A) FIG.1 MAXIMUM INSTANTANEOUS FORWARD CHARACTERITICS FIG.2 POWER DISSIPATION 4 300 sine wave 0 8.3ms 8.3ms 200 1 cycle non-repetitive Tj=25 100 0 5 2 1 10 20 50 3 P.C.B soldering land 5mmf sine wave R-load free in air 2 1 0 100 0 40 8 heatsink 4 0 10 sine wave R-load on heatsink 30 50 70 90 110 120 160 FIG.4 TYPICAL FORWARD CURRENT DERATING CURVE 130 150 HEAT SINK TEMPERATURE, (OC) FIG.5 TYPICAL FORWARD CURRENT DERATING CURVE 170 INSTANTANEOUS REVERSE CURRENT, (MA) 10 2 80 AMBIENT TEMPERATURE, (OC) FIG.3 SURGE FORWARD CURRENT CAPABILITY 6 14 on glass-epoxi substrate NUMBER OF CYCLE AVERAGE FORWARD CURRENT, (A) 6 INSTANTANEOUS FORWARD VOLTAGE, (V) AVERAGE FORWARD CURRENT, (A) 0 sine wave TJ = 150 OC 24 4 Pulse test per one diode IFSM PEAK FORWARD SURGE CURRENT, (A) INSTANTANEOUS FORWARD CURRENT, (A) RATING AND CHARACTERISTICS CURVES ( RS801M THRU RS807M ) 10000 O TA =150 C 1000 100 1.0 0.1 O TA = 25 C 0 20 40 60 80 100 120 140 PERCENT RATED PEAK REVERSE VOLTAGE, (%) FIG.6 MAXIMUM REVERSE CHARACTERISTICS Marking Description Rectron Logo RS80XM Part No. Voltage-code UL Logo Year – code (Y:Last digit of year) VYWW Week – code (WW:01~52) 1-------50V 2-------100V 3-------200V 4-------400V 5-------600V 6-------800V 7-------1000V PACKAGING OF DIODE AND BRIDGE RECTIFIERS BULK PACK EA PER BOX INNER BOX SIZE CARTON SIZE (mm) (mm) EA PER CARTON GROSS WEIGHT(Kg) PACKAGE PACKING CODE RS-8M -B 300 230*190*46 410*243*157 1,800 13.37 PACKAGE PACKING CODE EA PER BOX INNER BOX SIZE CARTON SIZE (mm) (mm) EA PER CARTON WEIGHT(Kg) RS-8M -C 600 490*135*110 510*293*131 1,200 13.12 eg(TYPE):RS807M-B TUBE PACK eg(TYPE):RS807M-C DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.