SA1
THRU
SA7
SURFACE MOUNT SILICON RECTIFIER
VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere
FEATURES
*
*
*
*
*
Ideal for surface mounted applications
Low leakage current
Metallurgically bonded construction
P/N suffix V means AEC-Q101 qualified, e.g:SA1V
P/N suffix V means Halogen-free
SOD-123F
.114 (2.9)
.106 (2.7)
MECHANICAL DATA
* Epoxy : Device has UL flammability classification 94V-0
* Mounting position: Any
* Weight: 0.018 gram
.035 (0.90)
.077 (1.95)
.028 (0.70)
.069 (1.75)
.008 (0.20)
.053 (1.35)
.039 (1.00)
.030 (0.75)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
.022 (0.55)
.150 (3.8)
Ratings at 25 o C ambient temperature unless otherwise specified.
.142 (3.6)
resistive or inductive load.
Dimensions in inches and (millimeters)
MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted)
RATINGS
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current at T L = 125 o C
Peak Forward Surge Current IFM(surge): 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
Current Squarad Time
SYMBOL
SA1
SA2
SA3
SA4
SA5
SA6
SA7
UNITS
VRRM
50
100
200
400
600
800
1000
Volts
VRMS
35
70
140
280
420
560
700
Volts
VDC
50
100
200
400
600
800
1000
Volts
IO
1.0
Amps
I FSM
30
Amps
I 2t
2.5
A Sec
RQJA
Typical Thermal Resistance (Note 3)
85
RQJL
Typical Junction Capacitance (Note 1)
Operating and Storage Temperature Range
2
0
25
C/W
30
CJ
8
T J, T STG
-55 to + 175
pF
0
C
ELECTRICAL CHARACTERISTICS (@TA=25 OC unless otherwise noted)
SYMBOL
CHARACTERISTICS
Maximum Forward Voltage at 1.0A DC
Maximum DC Average Reverse Current at
Rated DC Blocking Voltage
o
@T A = 150 C
NOTES : 1. Measured at 1.0 MHz and applied average voltage of 4.0VDC
2. “ROHS compliant”.
3. Thernal Resistance: Mounted on PCB.
SA2
SA3
SA4
SA5
SA6
SA7
UNITS
1.0
Volts
IR
1.0
1.0
uAmps
mAmps
o
@T A = 25 C
SA1
VF
2020-04
REV:E
RATING AND CHARACTERISTICS CURVES ( SA1 THRU SA7 )
0.8
0.6
0.4
Single Phase
Half Wave 60Hz
Resistive or
Inductive Load
0.2
0
250
50
50
PEAK FORWARD SURGE CURRENT, (A)
AVERAGE FORWARD CURRENT, (A)
1.0
75
100
125
150
8.3ms Single Half Sine-Wave
(JEDED Method)
40
30
20
10
0
0
175
2
O
LEAD TEMPERATURE, ( C)
INSTANTANEOUS REVERSE CURRENT, (uA)
MAXIMUM FORWARD CURRENT
DERATING CURVE
10
1.0
0.1
Pulse Width = 300ms
1% Duty Cycle
0.01
0
0.5
1.0
1.5
2.0
86 10
40
60 80 100
2.5
3.0
10000
TA = 150 OC
1000
100
10
1.0
0.1
1
TA = 25 OC
20
40
60
100
FIG.4 MAXIMUM REVERSE
CHARACTERISTICS
200
TA = 25 OC
100
60
40
20
10
6
4
2
0.1 0.2
80
120
PERCENT OF RATED PEAK REVERSE VOLTAGE, (%)
FIG.3 MAXIMUM INSTANTANEOUS
FORWARD CHARACTERISTICS
1
20
FIG.2 MAXIMUM NON-REPETITIVE FORWARD
SURGE CURRENT
INSTANTANEOUS FORWARD VOLTAGE, (V)
JUNCTION CAPACITANCE, (pF)
INSTANTANEOUS FORWARD CURRENT, (A)
FIG.1
4
NUMBER OF CYCLES AT 60Hz
0.4
1
2
4
10
20
40
REVERSE VOLTAGE, (V)
FIG.5 TYPICAL JUNCTION CAPACITANCE
100
140
Mounting Pad Layout
0.030 MIN.
(0.75 MIN.)
0.035MIN.
(0.90 MIN.)
0.165
(4.19) REF
Dimensions in inches and (millimeters)
Marking Description
Cathode Band
S
A
X
Part No.
Voltage-code
Y
Year – code
(Y: Last digit of year&
A: 2010, B: 2011……)
W
1-------50V
2-------100V
3-------200V
4-------400V
5-------600V
6-------800V
7-------1000V
Week – code
(W˖A----week 01~02,
B----week 03~04,
C----week 05~06,
……
Z----week 51~52)
PACKAGING OF DIODE AND BRIDGE RECTIFIERS
REEL PACK
PACKAGE
SOD-123F/
SOD-123FL
PACKING EA PER EA PER COMPONENT TAPE SPACE REEL DIA CARTON SIZE EA PER
GROSS
SPACE
INNER
REEL
CARTON
WEIGHT(Kg)
CODE
(mm)
(mm)
(mm)
(mm)
BOX
-W
3,000
15,000
---
---
178
390*205*31
120,000
6.964
DISCLAIMER NOTICE
Rectron Inc reserves the right to make changes without notice to any product
specification herein, to make corrections, modifications, enhancements or other
changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information
contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or
use of any product or circuit.
Rectron products are not designed, intended or authorized for use in medical,
life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in
such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.
很抱歉,暂时无法提供与“SA1”相匹配的价格&库存,您可以联系我们找货
免费人工找货