SA7L

SA1L THRU SA7L SURFACE MOUNT SILICON RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere FEATURES * * * * * Ideal for surface mounted applications Low leakage current Metallurgically bonded construction Mounting position: Any Weight: 0.015 gram SOD-123FL * P/N suffix V means AEC-Q101 qualified, e.g:SA1LV * P/N suffix V means Halogen-free .114 (2.9) .106 (2.7) MECHANICAL DATA * Epoxy : Device has UL flammability classification 94V-0 .077 (1.95) .035 (0.90) .028 (0.70) .069 (1.75) .008 (0.20) .039 (1.00) .035 (0.90) .150 (3.8) .142 (3.6) .059 (1.50) .043 (1.10) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. .033 (0.85) .033 (0.85) resistive or inductive load. .030 (0.75) .014 (0.35) .051 (1.3) .035 (0.9) Dimensions in inches and (millimeters) MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted) RATINGS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage o Maximum Average Forward Rectified Current at T A = 55 C Peak Forward Surge Current IFM(surge): 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Current Squarad Time SYMBOL SA1L SA2L SA3L SA4L SA5L SA6L SA7L UNITS VRRM 50 100 200 400 600 800 1000 Volts VRMS 35 70 140 280 420 560 700 Volts VDC 50 100 200 400 600 800 1000 Volts IO 1.0 Amps I FSM 30 Amps 2 3.7 2 A /Sec I t R JA Typical Thermal Resistance (Note 3) 85 R JL Typical Junction Capacitance (Note 1) Operating and Storage Temperature Range 0 25 C/W 30 CJ 8 T J, T STG -55 to + 150 pF 0 C ELECTRICAL CHARACTERISTICS (@TA=25 OC unless otherwise noted) SYMBOL CHARACTERISTICS Maximum Forward Voltage at 1.0A DC Maximum DC Average Reverse Current at Rated DC Blocking Voltage SA2L SA3L SA4L SA5L SA6L SA7L UNITS 1.0 Volts IR 1.0 5 uAmps mA mps o @T A = 25 C @T A = 150 o C SA1L VF NOTES : 1. Measured at 1.0 MHz and applied average voltage of 4.0VDC 2. “ ROHS compliant”. 3. Thernal Resistance: Mounted on PCB. 4. Available in Halogen-free epoxy by adding suffix -HF after the part nbr. 2019-03 REV:C RATING AND CHARACTERISTICS CURVES ( SA1L THRU SA7L ) 0.8 0.6 0.4 Single Phase Half Wave 60Hz Resistive or Inductive Load 0.2 0 250 50 50 PEAK FORWARD SURGE CURRENT, (A) AVERAGE FORWARD CURRENT, (A) 1.0 75 100 125 150 8.3ms Single Half Sine-Wave (JEDED Method) 40 30 20 10 0 175 1 2 4 O 10 1.0 TA = 100 OC 0.1 Pulse Width = 300ms 1% Duty Cycle 0.01 0.5 1.0 1.5 2.0 2.5 60 80 100 3.0 TA = 150 OC 1000 TA = 25 OC 1.0 0.1 0 20 40 60 100 FIG.4 MAXIMUM REVERSE CHARACTERISTICS TA = 25 OC 100 60 40 20 10 6 4 2 0.1 0.4 80 120 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) 200 0 40 10000 FIG.3 MAXIMUM INST TANTANEOUS FORWARD CHARACTERISTICS 1 20 FIG.2 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT INSTANTANEOUS FORWARD VOLTAGE, (V) JUNCTION CAPACITANCE, (pF) INSTANTANEOUS FORWARD CURRENT, (A) FIG.1 TYPICAL FORWARD CURRENT DERATING CURVE 0 10 6 NUMBER OF CYCLES AT 60Hz INSTANTANEOUS REVERSE CURRENT, ( A) AMBIENT TEMPERATURE, ( C) 1.0 4 10 20 40 REVERSE VOLTAGE, (V) FIG.5 TYPICAL JUNCTION CAPACITANCE 100 140 Mounting Pad Layout .052 MIN. (1.32 MIN.) .033 MIN. (0.85 MIN.) .044 MIN. (1.12 MIN.) 0.165 (4.19) REF Dimensions in inches and (millimeters) .033 MIN. (0.85 MIN.) Marking Description Cathode Band S A Y Year – code (Y: Last digit of year& A: 2010, B:2011……) X W Part No. Voltage-code 1-------50V 2-------100V 3-------200V 4-------400V 5-------600V 6-------800V 7-------1000V Week – code (W: A----week 01~02, B----week 03~04, C----week 05~06, ĂĂ Z----week 51~52) PACKAGING OF DIODE AND BRIDGE RECTIFIERS REEL PACK PACKAGE SOD-123F/ SOD-123FL PACKING EA PER EA PER COMPONENT TAPE SPACE REEL DIA CARTON SIZE EA PER GROSS SPACE INNER REEL CARTON WEIGHT(Kg) CODE (mm) (mm) (mm) (mm) BOX -W 3,000 15,000 --- --- 178 390*205*31 120,000 6.964 DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.