SLDB056S

VOLTAGE RANGE 50 to 1000 Volts CURRENT 0.5 Ampere FEATURES * * * * * * * * SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER SLDB051S T HRU SLDB057S Good for automation insertion Surge overload rating - 15 a mperes peak Ideal for printed circuit board Reliable low cost construction utilizing molded Glass passivated device Polarity symbols molded on body Mounting position: Any Weight: 0.33 gram SLDBS MECHANICAL DATA .252 (6.4) .236 (6.0) MAX .189 (4.8) * Epoxy: Device has UL flammability classification 94V-O .009(0.220) .007(0.180) .0039 (0.100) .0036 (0.092) .028 (0.700) .012 (0.300) .142 (3.6) .126 (3.2) MAX .209 (5.3) .028 (0.7) .020 (0.5) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. .165 (4.2) .150 (3.8) MAX .059 (1.5) Dimensions in inches and (millimeters) MAXIMUM RA TINGS ( At T A = 2 5oC unless otherwise noted) R ATINGS Maximum Recurrent Peak Reverse Voltage Maximum RMS Bridge Input Voltage Maximum DC Blocking Voltage Ma x imum Average Forward Output Current at T A = 4 0 oC Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Thermal Resistance (Note 2) Operating and Storage Temperature Ran g e o SYMBOL SLDB051S SLDB052S SLDB053S SLDB054S SLDB055S SLDB056S SLDB057S VRRM VRMS VDC IO I FSM R qJA RqJL T J, T STG 50 35 50 100 70 100 200 140 200 400 280 400 0.5 15 70 30 -55 to + 150 600 420 600 800 560 800 1000 700 1000 UNITS Volts Volts Volts Amps Amps C/ W 0 0 C ELECTRICAL C HARACTERISTICS (At TA = 25 C unless otherwise noted) CHARACTERISTICS Maximum Forward Voltage Drop per Bridge Element at 0.5A DC Maximum Reverse Current at Rated DC Blocking Voltage per element @T A = 2 5 C @T A = 1 25 o C o SYMBOL SLDB051S SLDB052S SLDB053S SLDB054S SLDB055S SLDB056S SLDB057S VF IR 1.1 2.0 0.5 UNITS Volts uAmps mAmps 2007-08 Note: 1.”Fully ROHS compliant”,”100% Sn plating(Pb-free). 2. Thermal Resistance: Mounted on PCB. RATING AND CHARACTERISTICS CURVES ( SLDB051S THRU SLDB057S ) 8.3mS Single Half Sine-Wave JEDEC Method 25 20 15 10 5 0 0 2 4 6 INSTANTANEOUS FORWARD CURRENT, (A) PEAK FORWARD SURGE CURRENT, (A) 30 10 1 0.1 T J = 2 5 OC Pulse Width = 300mS 1% Duty Cycle 10 20 40 60 100 0.01 0 0.4 0.8 1.2 1.6 2.0 NUMBER OF CYCLES AT 60Hz INSTANTANEOUS FORWARD VOLTAGE, (V) INSTANTANEOUS REVERSE CURRENT, (uA) 1000 FIG. 1 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT AVERAGE FORWARD CURRENT, (A) TA = 125 OC 1.5 FIG.2 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 100 1.0 10 T A = 2 5 OC 0.5 1.0 60 Hz RESISTIVE OR INDUCTIVE LOAD 0.1 0 20 40 60 80 100 120 140 0 20 40 60 80 100 120 140 150 PERCENT RATED PEAK REVERSE VOLTAGE, (%) AMBIENT TEMPERATURE, (OC) FIG.3 TYPICAL REVERSE CHARACTERISTICS FIG.4 TYPICAL FORWARD CURRENT DERATING CURVE Mounting Pad Layout .252 Max. (6.40 Max.) .165 (4.2) .150 (3.8) .028Min. (0.70Min.) .028 Min. (0.70 Min.) Dimensions in inches and (millimeters) DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.