SLDB207S

SLDB207S SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE 1000 Volts CURRENT 2.0 Ampere FEATURES * * * * * * * * Good for automation insertion Surge overload rating - 50 amperes peak Ideal for printed circuit board Reliable low cost construction utilizing molded Glass passivated device Polarity symbols molded on body Mounting position: Any Weight: 0.33 gram SLDBS .009(0.220) .177 (4.5) .169 (4.3) .236 (6.0) * Epoxy: Device has UL flammability classification 94V-O * Halogen-free .252 (6.4) MECHANICAL DATA .007(0.180) .0039 (0.100) .028 (0.700) .0036 (0.092) .012 (0.300) .028 (0.7) .020 (0.5) .135 (3.45) .127 (3.25) Pin 2 Pin 1 Pin 4 Pin 3 .200 (5.1) .192 (4.9) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS MAX .059 (1.5) o Ratings at 25 C ambient temperature unless otherwise specified. .161 (4.1) .153 (3.9) resistive or inductive load. Dimensions in inches and (millimeters) o MAXIMUM RATINGS (At TA = 25 C unless otherwise noted) SYMBOL SLDB207S UNITS Maximum Recurrent Peak Reverse Voltage VRRM 1000 Volts Maximum RMS Bridge Input Voltage VRMS 700 Volts Maximum DC Blocking Voltage VDC 1000 Volts IO 2.0 Amps I FSM 50 Amps I 2t 10.4 A2/S RATINGS Maximum Average Forward Output Current at T A = 40 oC Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Current Squared Time Typical Thermal Resistance (Note 2) Operating and Storage Temperature Range R θJA 62.5 RθJL 25 T J, T STG -55 to + 150 0 C/W 0 C o ELECTRICAL CHARACTERISTICS (At TA = 25 C unless otherwise noted) CHARACTERISTICS Maximum Forward Voltage Drop per Bridge Element at 2.0A DC SYMBOL SLDB207S UNITS VF 1.0 Volts o Maximum Reverse Current at Rated @T A = 25 C DC Blocking Voltage per element @T A = 125 o C Note: 1.”Fully ROHS compliant”,”100% Sn plating(Pb-free). 2. Thermal Resistance: Mounted on PCB. IR 1.0 uAmps 0.05 mAmps 2016-07 REV:O 50 8.3mS Single Half Sine-Wave JEDEC Method 40 30 20 10 5 0 1 86 14 10 20 40 60 100 INSTANTANEOUS FORWARD CURRENT, (A) PEAK FORWARD SURGE CURRENT, (A) RATING AND CHARACTERISTICS CURVES ( SLDB207S ) 10 1 0.1 T J = 25 OC Pulse Width = 300mS 1% Duty Cycle 0.01 0 NUMBER OF CYCLES AT 60Hz 0.8 1.2 1.6 2.0 FIG.2 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 2.5 1000 TA = 125 OC AVERAGE FORWARD CURRENT, (A) INSTANTANEOUS REVERSE CURRENT, (uA) FIG. 1 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 100 10 1.0 O TA = 25 C 0.1 0 0.4 INSTANTANEOUS FORWARD VOLTAGE, (V) 20 40 60 80 100 120 140 PERCENT RATED PEAK REVERSE VOLTAGE, (%) FIG.3 TYPICAL REVERSE CHARACTERISTICS 2.0 1.5 1.0 60 Hz RESISTIVE OR INDUCTIVE LOAD 0.5 20 40 60 80 100 120 140 150 AMBIENT TEMPERATURE, (OC) FIG.4 TYPICAL FORWARD CURRENT DERATING CURVE Mounting Pad Layout .252 Max. (6.40 Max.) .165 (4.2) .150 (3.8) .028Min. (0.70Min.) Dimensions in inches and (millimeters) .028 Min. (0.70 Min.) REEL TAPING SPECIFICATIONS FOR SURFACE MOUNT DEVICES-SLDBS P0 P1 d E F B A P o T W MAX. 3 A R o MAX. 3 D C Fig.: Configuration of SLDBS TAPING ITEM Carrier width Carrier length Carrier depth Sprocket hole D1 D2 SYMBOL A B C d SLDBS mm(inch) 6.0 0.1 (0.236 0.004) 8.30 0.1 (0.327 0.004) 2.5 1.5 Reel outside diameter Reel inner diameter Feed hole diameter Strocket hole position Punch hole position Punch hole pitch D D1 D2 E F P 0.1 (0.098 0.004) 0.1 (0.059 0.004) 330 2.0 (13.0 0.079) 50 Min. 13 0.5 (0.512 0.020) 1.5 0.1 (0.059 0.004) 7.65 0.05 (0.301 0.002) 8.0 0.1 (0.315 0.004) Sprocket hole pitch Embossment center Totall tape thickness Tape width Reel width P0 P1 T W W1 0.1 (0.157 0.004) 0.1 (0.157 0.004) 0.6 Max. 16.0 0.2 (0.630 0.008) 24.0 2.0 (0.945 0.079) 4.0 4.0 Note: 1.Devices are packed in accordance with EIA standard RS-481-A and specification given above. 2.13 inch ( 5000 ct. ) diameter reels. W1 1. BOX Packing L W H Code (mm) (mm) (mm) -T 340 340 40 2. REEL D Packing D Code (mm) -T 330 Packing L W H Code (mm) (mm) (mm) -T 355 360 360 3. CARTON PACKAGING OF DIODE AND BRIDGE RECTIFIERS REEL PACK PACKAGE SLDBS PACKING EA PER EA PER COMPONENT TAPE SPACE REEL DIA CARTON SIZE EA PER GROSS SPACE INNER REEL CARTON WEIGHT(Kg) CODE (mm) (mm) (mm) (mm) BOX -T/W 5,000 10,000 --- --- 330 360*355*360 80,000 16.18 Marking Description - + Rectron Logo 2 A 7 Part No. Voltage-code ~ V Y WW H X ~ Year – code: (Y:Last digit of year& A:2010, B:2011……) Week – code: (WW:01~52) 7-----1000V TMTT # : (# :1~4) Halogen-free DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.