SR1240-C-S-R01

SR1240C-S-R01 SCHOTTKY BARRIER RECTIFIER VOLTAGE 40 Volts CURRENT 12 Amperes FEATURES * Low switching noise * Low forward voltage drop * Low thermal resistance * High current capability * High surge capabitity * High reliability * Ideal for Solar applications such as By-Pass and Blocking diodes R-6 MECHANICAL DATA * * * * * C ase: R-6 axial-leaded, molded plastic Epoxy: Device has U L flammability classification 94V-O Lead: MIL-STD-202E method 208C guaranteed Mounting position: Any Weight: 1. 897 grams 1.0 (25.4) MIN. .052 (1.3) DIA. .048 (1.2) .360 (9.1) .340 (8.6) .360 (9.1) .340 (8.6) DIA. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. 1.0 (25.4) MIN. Dimensions in inches and (millimeters) MAXIMUM RAT INGS (@ TA=25 OC unless otherwise noted) R ATINGS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at Derating L ead Te mperature Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Thermal Resistance (Note 1) Operating Te mperature Ran g e Storage Temperature R an g e SYMBOL VRRM VRMS VDC IO I FSM RqJC RqJA TJ T STG SR1240-C-S-R01 40 28 40 12 300 1.0 40 150 -55 to + 150 UNITS Volts Volts Volts Amps Amps 0 C/W 0 0 C C E LECTRICAL CHARACTERISTICS (@TA=25 OC unless otherwise noted) CHARACTERISTICS Maximum Instantaneous Forward Voltage at 12 A DC Maximum Average Reverse Current at Rated DC Blocking Voltage @T A = 2 5 o C @T A = 1 00 o C SYMBOL VF IR SR1240-C-S-R01 .53 10 1 UNITS Volts uA mA 2009-02 REV: O NOTES : 1 . Thermal Resistance : Heat-sink mounted. 2. Suffix “R” for Reverse Polarity. 3. "Fully ROHS compliant", "100% Sn plating (Pb-free)". RATING AND CHARACTERISTICS CURVES ( SR1240-C-S-R01 ) 12 AVERAGE FORWARD CURRENT, (A) 10 8 6 4 2 INSTANTANEOUS REVERSE CURRENT, (mA) 10 TA = 100 OC 1.0 0.1 T A = 2 5 OC T A = 7 5 OC 0.01 Single Phase Half Wave 60Hz Inductive or Resistive Load 0 50 100 O 150 0.001 0 20 40 60 80 100 120 140 LEAD TEMPERATURE, ( C) PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) FIG.1 TYPICAL FORWARD CURRENT DERATING CURVE FIG.2 TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT, (A) PEAK FORWARD SURGE CURRENT, (A) 50 300 250 200 150 100 50 0 1 8.3mS Single Half Sine-Wave JEDEC Method 10 1.0 T J = 2 5 OC Pulse width=300mS 1% Duty Cycle 0.1 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 2 5 10 20 50 100 INSTANTANEOUS FORWARD VOLTAGE, (V) NUMBER OF CYCLES AT 60Hz FIG.3 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.4 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.