SR3045CS

SR3045CS SCHOTTKY BARRIER RECTIFIER VOLTAGE RANGE 45 Volts CURRENT 30 Amperes FEATURES * * * * * * * * * * * * MECHANICAL DATA ref. .049 (1.25 ) Low switching noise Low forward voltage drop Low thermal resistance High current capability High switching capability High surge capabitity High reliability C ase: D2-PAK molded plastic Epoxy: Device has UL flammability classification 94V-O Lead: MIL-STD-202E method 208C guaranteed Mounting position: Any We ight: 3.61 g r am s D2-PAK .189 (4.80) .173 (4.40) .053 (1.35) .049 (1.25) .346 (8.8) .323 (8.2) PIN 1 PIN 2 PIN 3 .624 (15.84) .576 (14.64) .126 (3.20) .110 (2.80) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. .202 (5.13) .198 (5.03) .412 (10.46) .388 (9.86) .020 (0.50) .012 (0.30) PIN 1 PIN 3 PIN 2 HEATSINK Dimensions in inches and (millimeters) MAXIMUM RAT INGS (@ TA=25 OC unless otherwise noted) R ATINGS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at Derating C ase Te mperature Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Thermal Resistance (Note 1) Operating Te mperature Ran g e Storage Temperature R an g e O SYMBOL VRRM VRMS VDC IO I FSM RqJC RqJA TJ T STG SR3045C 45 32 45 30 300 1.5 30 150 -55 to + 150 .098 (2.50) .083 (2.10) .055 (1.40) .047 (1.20) .036 (0.91) .028 (0.71) .069 (1.75) .053 (1.35) UNITS Volts Volts Volts Amps Amps 0 C/W 0 0 C C E LECTRICAL CHARACTERISTICS (@TA=25 C unless otherwise noted) CHARACTERISTICS Maximum Instantaneous Forward Voltage at 15.0A DC Maximum Average Reverse Current at Rated DC Blocking Voltage @T A = 2 5 o C @T A = 1 00 o C SYMBOL VF IR SR3045C .65 1.0 10 UNITS Volts mA mA 2009-05 R EV:O NOTES : 1. Thermal Resistance : Heat-sink mounted. 2. Suffix “A” = Common Anode. 3."Fully ROHS compliant","100% Sn plating (Pb-free)". RATING AND CHARACTERISTICS CURVES ( SR3045CS ) 30 25 20 15 10 5 0 Single Phase Half Wave 60Hz Inductive or Resistive Load INSTANTANEOUS FORWARD CURRENT, (mA) AVERAGE FORWARD CURRENT, (A) 100 O 10 TA = 100 C 1 TA = 25 C O T A = 7 5 OC 0.1 0 50 100 O 150 0.01 0 20 40 60 80 100 120 140 LEAD TEMPERATURE, ( C) PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) INSTANTANEOUS REVERSE CURRENT, (A) PEAK FORWARD SURGE CURRENT, (A) 50 FIG.1 TYPICAL FORWARD CURRENT DERATING CURVE 300 250 200 150 100 50 0 1 FIG.2 TYPICAL REVERSE CHARACTERISTICS 8.3mS Single Half Sine-Wave JEDEC Method 10 1.0 T J = 2 5 OC Pulse width=300mS 1% Duty Cycle 0.1 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2 5 10 20 50 100 INSTANTANEOUS FORWARD VOLTAGE, (V) NUMBER OF CYCLES AT 60Hz FIG.3 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.4 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.