TMPG06-27

RECTRON SEMICONDUCTOR TECHNICAL SPECIFICATION TMPG06-27 TRANSIENT VOLTAGE SUPPRESSOR 300 WATT PEAK POWER 1.0 WATT STEADY STATE FEATURES * Designed for the hood applications * Available in uni-directional only * Glass passivated chip construction * Excellent clamping capability * Low incremental surge resistance * Fast response time: typically less than 1.0ps from 0 Volts to V(BR) * For devices with V(BR)>=10V, ID are typically less than 1.0uA R-1 MECHANICAL DATA * * * * * Case: Molded plastic black body Epoxy: Device hasUL flammability classification 94V-O Lead: MIL-STD-202E method 208C guaranteed Mounting position: Any Weight: 0.19 gram .787 (20.0) MIN. .025 (0.65) DIA. .021 (0.55) .126 (3.2) .106 (2.7) Ratings at 25 o C ambient temperature unless otherwise specified. .102 (2.6) DIA. .091 (2.3) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 C ambient temperature unless otherwise specified. o .787 (20.0) MIN. Dimensions in inches and (millimeters) Electrical characteristics apply in uni-directional only MAXIMUM RATINGS (At TA = 25 oC unless otherwise noted) RATINGS Peak Power Dissipation with a 10/1000uS (Note 1, Fig.1) Peak Pulse Current with a 10/1000uS waveform ( Note 1, 2, Fig.3 ) Steady State Power Dissipation (Note 2) Peak Forward Surge Current per Fig.5 (Note 2,4) Maximum Instantaneous Forward Voltage at 25A (Note 4) Operating and Storage Temperature Range SYMBOL P PPM I PPM P M ( AV ) I FSM VF T J , T STG VALUE 300 SEE TABLE 1 1.0 40 3.5 -55 to + 150 UNITS Watts Amps Watts Amps Volts 0 C 2002-4 NOTES : 1. Non-repetitive current pulse, per Fig.3 and derated above TA = 25oC per Fig.2. 2. Mounted on 0.2 X 0.2”( 5.0 X 5.0mm ) copper pad to each terminal. 3. Lead temperature at TL = 75oC 4. Measured on 8.3mS single half sine-wave or equivalent square wave, duty cycle = 4 pules per minute maximum. 5. Peak pulse power waveform is 10/1000uS. RATING AND CHARACTERISTIC CURVES ( TMPG06-27 ) PPPM, PEAK PULSE POWER, kW FIG. 1 - PEAK PULSE POWER RATING CURVE 100 Non-Repetitive Pulse Waveform Shown in Fig.3 TA = 25¢J PEAK PULSE POWER (PPP) OR CURRENT (IPP) DERATING IN PERCENTAGE,% FIG. 2 - PULSE DERATING CURVE 1.00 .75 10 .50 1.0 .25 0.1 0.1uS 0 0 25 50 75 100 125 150 175 200 TA, AMBIENT TEMPERATURE,(¢J) FIG. 4 - TYPICAL JUNCTION CAPACITANCE 1.0uS 10uS 100uS 1.0mS 10mS TP, PULSE WIDTH, sec FIG. 3 - PULSE WAVEFORM 150 10000 tr = 10usec. Peak Value IPPM Pulse Width (td) is Defined as the Point Where the Peak Current Decays to 50% of IPPM IPPM, PEAK PULSE CURRENT,% f = 1.0 MHz Vsig = 50mVp-p TJ = 25¢J CJ, CAPACITANCE, pF 100 IPPM HALF VALUE 2 10/1000usec. Waveform as Defined by R.E.A. 1000 Measured at Zero Bias 50 100 Measured at Stand off Voltage,VWM td 0 0 1.0 2.0 t, TIME,mS 3.0 4.0 10 1.0 10 100 200 V(BR), BREAKDOWN VOLTACE, VOLTS FIG. 5 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT UNIDIRECTIONAL IFSM, PEAK FORWARD SURGE CURRENT AMPERES 50 40 30 20 10 0 1 10 NUMBER OF CYCLES AT 60 Hz 100 8.3ms Single Half Sine-Wave (JEDED Method) TJ = TJ max. RECTRON TRANSIENT VOLTAGE SUPPRESSORS 300W SERIES TVS DIODES / R-1 300W (TABLE 1) Breakdown Voltage VBR @IT (Volts) MIN. TMPG06-27 24.3 TYPE MAX. 29.7 (mA) 1.0 Reverse Stand off Voltage VWM (Volts) 21.8 Maximum Reverse Leakage at VWM ID(uA) 1.0 Maximum Peak Pulse Current IPPM (Amps) 7.6 Maximum Clamping Voltage at IPPM VC (Volts) 39.4 RECTRON