Z200A

Z75 THRU Z330 ZENER SILICON RECTIFIER VOLTAGE RANGE 75 to 330 Volts Power - 1 Watts. FEATURES * High reliability * Low leakage * Low forward voltage drop * Excellent clamping capability * P/N suffix V means AEC-Q101 qualified, e.g:Z75V * P/N suffix V means Halogen-free DO-41 MECHANICAL DATA * * * * * Case: Molded plastic Epoxy: Device has UL flammability classification 94V-O Lead: MIL-STD-202E method 208C guaranteed Mounting position: Any Weight: 0.33 gram 1.0 (25.4) MIN. .205 (5.2) .166 (4.2) .034 (0.9) DIA. .028 (0.7) .107 (2.7) .080 (2.0) DIA. 1.0 (25.4) MIN. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS o Ratings at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) MAXIMUM RATINGS (At T A = 25oC unless otherwise noted) Maximum Reverse TYPE Zener Dynamic Impedances Current Breakdown @ @ Measurement Voltage 25oC T A Voltage Maximum Forward Voltage o @ 25 C T A @ IF = 1.0A and 25oC TA VZ I ZT Z ZT I ZK Z ZK VR IR VF V mA Ohms mA Ohms V uA V 200 1500 2000 60 70 5.0 5.0 1.2 Z75 75 Z90 90 3.0 2.7 250 .25 .25 Z100 100 2.5 350 .25 3000 75 5.0 1.2 Z105 105 2.4 400 .25 3500 77 5.0 1.2 Z110 110 2.3 450 .25 4000 80 5.0 1.2 Z115 115 2.2 500 .25 4250 85 5.0 1.2 Z120 120 2.1 550 .25 4500 90 5.0 1.2 Z130 130 1.9 700 .25 5000 95 5.0 1.2 Z135 135 1.85 750 .25 5250 100 5.0 1.2 1.2 2018-09 REV:D Maximum Reverse Zener TYPE Dynamic Impedances Current @ @ Measurement Breakdown o Voltage 25 C T A Voltage Maximum Forward Voltage @ 25 oC T A @ IF = 1.0A and 25 oC T A VZ I ZT Z ZT I ZK Z ZK VR IR VF V mA Ohms mA Ohms V uA V Z140 140 1.8 800 .25 5500 105 5.0 1.2 Z150 150 1.7 1000 .25 6000 110 5.0 1.2 Z160 160 1.6 1100 .25 6500 120 5.0 1.2 Z170 170 1.5 1200 .25 6750 130 5.0 1.2 Z180 180 1.4 1350 .25 7000 140 5.0 1.2 Z190 190 1.3 1500 .25 7500 150 5.0 1.2 Z200 200 1.2 1700 .25 8000 160 5.0 1.2 Z220 220 1.1 2000 .25 8250 170 5.0 1.2 Z240 240 1.0 2200 .25 8500 180 5.0 1.2 Z270 270 0.9 2500 .25 8750 200 5.0 1.2 Z300 300 0.8 3000 .25 9000 220 5.0 1.2 Z330 330 0.75 4000 .25 9500 240 5.0 1.2 o o OPERATING AND STORAGE TEMPERATURE - 55 C to + 150 C NOTE:1. Standard tolerance: +/-20%, Suffix “A” : +/-10%, Suffix “B” : +/-5% 2. “Fully ROHS compliant”, “100% Sn plating (Pb-free)”. 1.0 .75 .50 Single Phase Half Wave 60Hz Inductive or Resistive Load 0.375" (9.5mm) Lead Lengths 0 INSTANTANEOUS FORWARD CURRENT, (A) 25 50 75 100 125 150 LEAD TEMPERATURE, FIG. 3 - MAXIMUM INSTANTANEOUS FORWARD CHARACTERISTICS 10 1.0 TJ = 25 .1 .01 FIG. 2 - TYPICAL ZENER IMPEDANCE 10000 Pulse Width = 300us 1% Duty Cycle .4 .6 .8 1.0 1.2 1.4 1.6 INSTANTANEOUS FORWARD VOLTAGE, (V) TJ = 25 5000 iz = (rms) = 0.1Iz (dc) 2000 1000 Vz=200V 500 Vz=180V 200 100 Vz=160V 50 Vz=100V 10 175 .5 INSTANTANEOUS REVERSE CURRENT, (uA) .25 Zz, DYNAMIC IMPEDANCE (Ohms) FIG. 1 - MAXIMUM CONTINUOUS POWER DISSIPATION Ovz, TEMPERATURE COEFFICIENT (mV/ ) REVERSE POWER DISSIPATION, (W) RATING AND CHARACTERISTIC CURVES ( Z75 THRU Z330 ) 1.0 5.0 10 20 50 100 200 500 Iz, ZENER TEST CURRENT (mA) FIG. 4 - MAXIMUM REVERSE CHARACTERISTICS 10 4 TJ = 150 1.0 .4 .1 .04 TJ = 25 .01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) FIG. 5 - TYPICAL TEMPERATURE COEFFICIENTS 220 200 180 150 120 100 80 100 110 120 130 140 150 160 170 180 190 200 Vz, ZENER VOLTAGE (V) RECTRON AXIAL LEAD TAPING SPECIFICATIONS FOR RECTIFIERS Axial lead devices are packed in accordance with EIA standard RS-296-D and specifications given below. COMPNENT OUTLINE COMPONENT PITCH A 0.5mm (.020") T-1 R-1 5.0mm 5.0mm INNER TAPE PITCH B 0.5mm (.020") 1.5mm (.059") CUMULATIVE PITCH TOLERANCE 26.0mm 26.0mm 2.0mm/20pitch 2.0mm/20pitch R-1 5.0mm A-405 A-405 DO-41 DO-41 DO-15 R-3 DO-201AD 5.0mm 5.0mm 5.0mm 5.0mm 5.0mm 5.0mm 10.0mm 52.4mm 2.0mm/20pitch R-6 10.0mm 52.4mm 2.0mm/10pitch 1.5KE 10.0mm 52.4mm 2.0mm/10pitch 26.0mm 2.0mm/20pitch 2.0mm/20pitch 2.0mm/20pitch 2.0mm/10pitch 2.0mm/10pitch 2.0mm/10pitch 2.0mm/10pitch 52.4mm 26.0mm 52.4mm 52.4mm 52.4mm 52.4mm Note: -E for 26mm inner tape pitch -F & -T for 52mm inner tape pitch Z O O 90 5 DO A E W L1 D1 B L2 D T E Fig.: Configuration of AXIAL LEAD TAPING ITEM Component alignment Tape width Exposed adhesive Body eccentricity Reel outside diameter Reel inner diameter Feed hole diameter Reel width Notes : SYMBOL Z T E IL1-L2I D D1 DO W SPECIFICATIONS (mm) 1.2 Max. 6.0 0.4 0.8 Max. 1.0 Max. 330.0 85.7 0.3 30.5 0.4 79.0 1.0 1.Each component lead shall be sandwiched between tapes for a minimum of 3.2mm (0.126"). 2.The reel width "W" for 26mm taping is 50.0 1.0mm (1.97" 0.040"). SPECIFICATIONS (inch) 0.048 Max. 0.236 0.016 0.032 Max. 0.040 Max. 13.0 3.375 0.012 1.201 0.016 3.110 0.040 2002-12 PACKAGING OF DIODE AND BRIDGE RECTIFIERS BULK PACK PACKAGE PACKING CODE DO-41 -B EA PER BOX INNER BOX SIZE (mm) 1,000 194*75*21 CARTON SIZE EA PER CARTON (mm) 415*220*255 50,000 GROSS WEIGHT(Kg) 16.2 REEL PACK PACKAGE DO-41 PACKING EA PER EA PER COMPONENT TAPE SPACE REEL DIA CARTON SIZE EA PER GROSS SPACE INNER REEL CARTON WEIGHT(Kg) CODE (mm) (mm) (mm) (mm) BOX -T 5,000 5,000 5.0 52 330 355*350*335 20,000 10.49 AMMO PACK COMPONENT TAPE SPACE SPACE(mm) (mm) PACKAGE PACKING CODE REEL ( EA ) DO-41 -F 3,000 5.0 52 DO-41 -E 3,000 5.0 26 BOX SIZE (mm) CARTON SIZE(mm) CARTON ( EA ) GROSS WEIGHT (Kg) 255*73*100 400*268*225 30,000 13.0 256*48*94 42,000 12.41 365*270*217 1. Internal Circuit Anode Cathode 2. Marking on the body Cathode Band Plant - code Year - code V X X Rectron Logo Part No. Month - code ZXXX Voltage Range DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.