DATASHEET
ICS650-11
NETWORKING CLOCK SYNTHESIZER
Description
Features
The ICS650-11 is a low cost, low jitter, high performance
clock synthesizer customized for BroadCom. Using analog
Phase-Locked Loop (PLL) techniques, the device accepts a
25.0MHz clock or fundamental mode crystal input to
produce multiple output clocks of 25.0MHz, 33.33MHz,
66.66MHz, 100.0MHz, and 133.33MHz. All output clocks
are frequency locked together. The ICS650-11 outputs all
have 0 ppm synthesis error.
• Packaged in 20-pin narrow SSOP, Pb-free
• 25.00 MHz fundamental crystal or clock input
• Five fixed output clocks of 25.0 MHz, 33.33MHz,
66.66MHz, 100.0MHz, and 133.33MHz
•
•
•
•
•
•
Zero ppm synthesis error in all clocks
Ideal for BroadCom BCM5600/BCM5400 chipset
Full CMOS output swing
Advanced, low power, sub-micron CMOS process
3.0V to 5.5V operating voltage
Industrial temperature range
Block Diagram
IDT® NETWORKING CLOCK SYNTHESIZER
1
ICS650-11
REV D 012313
ICS650-11
NETWORKING CLOCK SYNTHESIZER
SYNTHESIZERS
Pin Assignment
Pin Descriptions
Pin
Number
Pin
Name
Pin
Type
1
GND
Power
2
X2
XO
Crystal connection. Connect to a 25MHz crystal or leave unconnected for a
clock input.
3
X1
XI
Crystal connection. Connect to a 25MHz fundamental crystal or clock input.
4
VDD
Power
Connect to +3.3V or +5V. Must be same as other VDDs.
5
GND
Power
Connect to ground
6
GND
Power
Connect to ground
7
DC
—
Don’t connect. Do not connect this pin to anything.
8
DC
—
Don’t connect. Do not connect this pin to anything.
9
DC
—
Don’t connect. Do not connect this pin to anything.
10
100M
Output
100.0MHz clock output.
11
GND
Power
Connect to ground
12
66.66M
Output
66.66MHz clock output.
13
25M
Output
25.0MHz clock output.
14
GND
Power
Connect to ground
15
VDD
Power
Connect to +3.3V or +5V. Must be same as other VDDs.
16
VDD
Power
Connect to +3.3V or +5V. Must be same as other VDDs.
17
33.33M
Output
33.33MHz clock output.
18
133.33M
Output
133.33MHz clock output.
19
DC
—
Don’t connect. Do not connect this pin to anything.
20
DC
—
Don’t connect. Do not connect this pin to anything.
IDT® NETWORKING CLOCK SYNTHESIZER
Pin Description
Connect to ground
2
ICS650-11
REV D 012313
ICS650-11
NETWORKING CLOCK SYNTHESIZER
SYNTHESIZERS
External Components
The ICS650-11 requires a minimum number of external
components for proper operation. Decoupling capacitors of
0.01ìF should be connected between each VDD and GND
on Pins 4 and 6, and Pins 16 and 14, as close to the
ICS650-11 as possible. A series termination resistor of 33
may be used for each clock output. The 25.00 MHz crystal
must be connected as close to the chip as possible. The
crystal should be a fundamental mode (do not use third
overtone), parallel resonant. Crystal capacitors should be
connected from pins X1 to ground and X2 to ground to
optimize the initial accuracy. The value of these capacitors
is given by the following equation, where CL is the crystal
load capacitance: Crystal caps (pF) = (CL-6) x 2. So for a
crystal with 16 pF load capacitance, two 20 pF caps should
be used.
IDT® NETWORKING CLOCK SYNTHESIZER
3
ICS650-11
REV D 012313
ICS650-11
NETWORKING CLOCK SYNTHESIZER
SYNTHESIZERS
Absolute Maximum Ratings
Stresses above the ratings listed below can cause permanent damage to the ICS650-11. These ratings, which are
standard values for IDT commercially rated parts, are stress ratings only. Functional operation of the device at these
or any other conditions above those indicated in the operational sections of the specifications is not implied.
Exposure to absolute maximum rating conditions for extended periods can affect product reliability. Electrical
parameters are guaranteed only over the recommended operating temperature range.
Item
Rating
Supply Voltage, VDD (referenced to GND)
7V
All Inputs and Outputs (referenced to GND)
-0.5 V to VDD+0.5 V
Storage Temperature
-65 to +150C
Junction Temperature
125C
Soldering Temperature (max. of 20 seconds)
260C
Ambient Operating Temperature
-40° to +85°C
DC Electrical Characteristics
Unless stated otherwise, VDD = 3.3 V ±5%, Ambient Temperature -40 to +85C
Parameter
Symbol
Conditions
Min.
Typ.
Units
5.5
V
Operating Voltage
VDD
Input High Voltage
VIH
X1 pin only
Input Low Voltage
VIL
X1 pin only
Output High Voltage
VOH
IOH = -12 mA
Output Low Voltage
VOL
IOL = 12 mA
Output High Voltage,
CMOS level
VOH
IOH = -8 mA
Operating Supply Current
IDD
No load
35
mA
Each output
±50
mA
Short Circuit Current
3
Max.
VDD/2+1
VDD/2
VDD/2
V
VDD/2-1
2.4
V
V
0.4
V
VDD-0.4
V
AC Electrical Characteristics
CycleUnless stated otherwise, VDD = 3.3 V ±5%, Ambient Temperature -40 to +85C
Parameter
Input Frequency
Symbol
Conditions
Min.
fIN
Typ.
Max.
25.000
Units
MHz
Output Clock Rise Time
0.8 to 2.0V
1.5
ns
Output Clock Fall Time
2.0 to 0.8V
1.5
ns
Output Clock Duty Cycle
At VDD/2, except 25MHz
55
%
Frequency Error
All clocks
0
ppm
Absolute Jitter, Short-Term
Variation from mean
IDT® NETWORKING CLOCK SYNTHESIZER
4
45
50
175
ICS650-11
ps
REV D 012313
ICS650-11
NETWORKING CLOCK SYNTHESIZER
SYNTHESIZERS
Thermal Characteristics
Parameter
Symbol
Thermal Resistance Junction to
Ambient
Thermal Resistance Junction to Case
Conditions
Min.
Typ.
Max. Units
JA
Still air
135
C/W
JA
1 m/s air flow
93
C/W
JA
3 m/s air flow
78
C/W
60
C/W
JC
Marking Diagram
650R-11ILF
LOT
YYWW
Notes:
1. “LOT” denotes lot number.
2. “YYWW” denotes the date code.
3. “I” denotes industrial grade.
4. “LF” denotes RoHS compliant package.
5. Bottom marking: country of origin.
IDT® NETWORKING CLOCK SYNTHESIZER
5
ICS650-11
REV D 012313
ICS650-11
NETWORKING CLOCK SYNTHESIZER
SYNTHESIZERS
Package Outline and Package Dimensions (20-pin SSOP, 150 Mil. Body)
Symbol
Millimeters
Min
Max
Inches
Min
Max
A
A1
b
c
D
e
E
E1
L
1.35
1.75
0.102
0.254
0.203
0.305
0.191
0.254
8.560
8.738
0.635 BASIC
5.791
6.198
3.810
3.988
0.406
1.270
0.053
0.069
0.004
0.010
0.008
0.012
0.007
0.010
0.337
0.344
0.025 BASIC
0.228
0.244
0.150
0.157
0.016
0.050
Ordering Information
Part / Order Number
Marking
Shipping Packaging
Package
Temperature
650R-11ILF
650R-11ILFT
see page 5
Tubes
Tape and Reel
20-pin SSOP
20-pin SSOP
-40 to +85 C
-40 to +85 C
"LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant.
While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology (IDT) assumes
no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No
other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications
such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not
recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT
does not authorize or warrant any IDT product for use in life support devices or critical medical instruments.
IDT® NETWORKING CLOCK SYNTHESIZER
6
ICS650-11
REV D 012313
ICS650-11
NETWORKING CLOCK SYNTHESIZER
SYNTHESIZERS
Revision History
Rev.
Date
Originator
D
01/23/13
D. Chan
Description of Change
1. Updated datasheet to current IDT template.
2. Added marking diagram.
IDT® NETWORKING CLOCK SYNTHESIZER
7
ICS650-11
REV D 012313
ICS650-11
NETWORKING CLOCK SYNTHESIZER
SYNTHESIZERS
Innovate with IDT and accelerate your future networks. Contact:
www.IDT.com
For Sales
For Tech Support
800-345-7015
408-284-8200
Fax: 408-284-2775
www.idt.com/go/clockhelp
Corporate Headquarters
Integrated Device Technology, Inc.
www.idt.com
© 2013 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device
Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered
trademarks used to identify products or services of their respective owners.
Printed in USA
IMPORTANT NOTICE AND DISCLAIMER
RENESAS ELECTRONICS CORPORATION AND ITS SUBSIDIARIES (“RENESAS”) PROVIDES TECHNICAL
SPECIFICATIONS AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING
REFERENCE DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND
OTHER RESOURCES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS.
These resources are intended for developers skilled in the art designing with Renesas products. You are solely responsible
for (1) selecting the appropriate products for your application, (2) designing, validating, and testing your application, and (3)
ensuring your application meets applicable standards, and any other safety, security, or other requirements. These
resources are subject to change without notice. Renesas grants you permission to use these resources only for
development of an application that uses Renesas products. Other reproduction or use of these resources is strictly
prohibited. No license is granted to any other Renesas intellectual property or to any third party intellectual property.
Renesas disclaims responsibility for, and you will fully indemnify Renesas and its representatives against, any claims,
damages, costs, losses, or liabilities arising out of your use of these resources. Renesas' products are provided only subject
to Renesas' Terms and Conditions of Sale or other applicable terms agreed to in writing. No use of any Renesas resources
expands or otherwise alters any applicable warranties or warranty disclaimers for these products.
(Rev.1.0 Mar 2020)
Corporate Headquarters
Contact Information
TOYOSU FORESIA, 3-2-24 Toyosu,
Koto-ku, Tokyo 135-0061, Japan
www.renesas.com
For further information on a product, technology, the most
up-to-date version of a document, or your nearest sales
office, please visit:
www.renesas.com/contact/
Trademarks
Renesas and the Renesas logo are trademarks of Renesas
Electronics Corporation. All trademarks and registered
trademarks are the property of their respective owners.
© 2020 Renesas Electronics Corporation. All rights reserved.