DATASHEET
ICS650-22
PRV AND STB CLOCK SOURCE
Description
Features
The ICS650-22 is a low-cost, low-jitter, high-performance
clock synthesizer for personal video recorders (PVR) and
set-top box (STB) applications. Using analog Phase-Locked
Loop (PLL) techniques, the device accepts a 27 MHz crystal
input to produce multiple clocks for personal video recorder
applications.
•
•
•
•
•
•
•
Packaged in 20-pin narrow SSOP (QSOP)
Pb (lead) free package, RoHS compliant
27 MHz fundamental crystal or clock input
Zero ppm synthesis error in all clocks
Low skew 33.33 MHz clock outputs
Output enable controls all outputs
Full CMOS output swing with 25 mA output drive
capability at TTL levels
• Advanced, low-power, sub-micron CMOS process
• 3.3 V +10% operating voltage
Block Diagram
VDD
6
4
27 MHz
Fundamental
Crystal or
Clock
Clock
Synthesis
and Control
Circuitry
X1/ICLK
Crystal
OSC
X2
33.33 MHz
48 MHz
66.66 MHz
100 MHz
4
OE
GND
IDT™ / ICS™ PRV AND STB CLOCK SOURCE
1
ICS650-22
REV F 051310
ICS650-22
PRV AND STB CLOCK SOURCE
CLOCK SYNTHESIZER
Pin Assignment
GND
1
20
VDD
X2
2
19
100M
X1/ICLK
3
18
33M
VDD
4
17
33M
VDD
5
16
VDD
GND
6
15
VDD
48M
7
14
GND
VDD
8
13
33M
66M
9
12
33M
GND
10
11
OE
20-pin (150 mil) SSOP
Pin Descriptions
Pin
Number
Pin
Name
Pin
Type
1
GND
Power
Connect to ground.
2
X2
Input
Connect to a crystal input or leave open for ICLK.
3
X1/ICLK
Input
Connect to a crystal or reference clock input.
4, 5
VDD
Power
Connect to +3.3 V.
6
GND
Power
Connect to ground.
7
48M
Output
48 MHz clock output.
8
VDD
Power
Connect to +3.3 V.
9
66M
Output
66 MHz clock output.
10
GND
Power
Connect to ground.
11
OE
Input
Output enable active high. Internal pull-up resistor.
12, 13
33M
Output
33.33 MHz clock output.
14
GND
Power
Connect to ground.
15, 16
VDD
Power
Connect to +3.3 V.
17, 18
33M
Output
33.33 MHz clock output.
19
100M
Output
100 MHz clock output.
20
VDD
Power
Connect to +3.3 V.
IDT™ / ICS™ PRV AND STB CLOCK SOURCE
Pin Description
2
ICS650-22
REV F 051310
ICS650-22
PRV AND STB CLOCK SOURCE
CLOCK SYNTHESIZER
Absolute Maximum Ratings
Stresses above the ratings listed below can cause permanent damage to the ICS650-22. These ratings, which are
standard values for IDT commercially rated parts, are stress ratings only. Functional operation of the device at these
or any other conditions above those indicated in the operational sections of the specifications is not implied.
Exposure to absolute maximum rating conditions for extended periods can affect product reliability. Electrical
parameters are guaranteed only over the recommended operating temperature range.
Item
Rating
Supply Voltage, VDD
7V
All Inputs and Outputs
-0.5 V to VDD+0.5 V
Ambient Operating Temperature
-40 to +85° C
Storage Temperature
-65 to +150° C
Junction Temperature
125° C
Soldering Temperature
260° C
Recommended Operation Conditions
Parameter
Min.
Typ.
Max.
Units
0
-
+70
°C
+3.0
+3.3
+3.6
V
Ambient Operating Temperature
Power Supply Voltage (measured in respect to GND)
DC Electrical Characteristics
Unless stated otherwise, VDD = 3.3V ±10%, Ambient Temperature 0 to +70° C
Parameter
Symbol
Conditions
Min.
Typ.
Max.
Units
3.0
3.3
3.6
V
Operating Voltage
VDD
Input High Voltage
VIH
VDD/2+1 VDD/2
Input Low Voltage
VIL
VDD/2
Output High Voltage
VOH
IOH = -25 mA
Output Low Voltage
VOL
IOL = +25 mA
Output High Voltage
VOL
IOH = -8 mA
Operating Supply Current
IDD
No Load, OE=1
29
mA
No Load, OE=0
13
mA
V
VDD/2-1
2.4
V
V
0.5
VDD-0.4
V
V
Short Circuit Current
IOS
Each output
±70
mA
Internal Pull-up Resistor
RPU
Input select
390
kΩ
IDT™ / ICS™ PRV AND STB CLOCK SOURCE
3
ICS650-22
REV F 051310
ICS650-22
PRV AND STB CLOCK SOURCE
CLOCK SYNTHESIZER
AC Electrical Characteristics
Unless stated otherwise, VDD = 3.3V ±10%, Ambient Temperature 0 to +70° C
Parameter
Symbol
Conditions
Min.
Input Frequency
Typ.
Max. Units
27
MHz
Output Rise Time
tOR
0.8 to 2.0 V (note 1)
500
ps
Output Fall Time
tOF
2.0 to 0.8 V (note 1)
500
ps
Output Clock Duty Cycle
At VDD/2 (note 1)
45
50
Frequency Error
All clocks
Absolute Jitter, short term
33M, 100M clocks (note 1)
+100
ps
Absolute Jitter, short term
48M clock (note 1)
+160
ps
Absolute Jitter, short term
66M clock (note 1)
+140
ps
Output-to-output Skew, 33M
only
Rising edge at VDD/2
(note 1)
0
55
%
0
ppm
150
ps
Note 1: Measured with a 15 pF load.
Thermal Characteristics
Parameter
Thermal Resistance Junction to
Ambient
Thermal Resistance Junction to Case
IDT™ / ICS™ PRV AND STB CLOCK SOURCE
Symbol
Conditions
Min.
Typ.
Max. Units
θ JA
Still air
135
° C/W
θ JA
1 m/s air flow
93
° C/W
θ JA
3 m/s air flow
78
° C/W
60
° C/W
θ JC
4
ICS650-22
REV F 051310
ICS650-22
PRV AND STB CLOCK SOURCE
CLOCK SYNTHESIZER
Package Outline and Package Dimensions (20-pin SSOP, 150 Mil. Body)
Package dimensions are kept current with JEDEC Publication No. 95
Millimeters
20
Symbol
E1
A
A1
A2
b
C
D
E
E1
e
L
α
E
INDEX
AREA
1 2
D
A
2
Min
Inches
Max
1.35
1.75
0.10
0.25
-1.50
0.20
0.30
0.18
0.25
8.55
8.75
5.80
6.20
3.80
4.00
0.635 Basic
0.40
1.27
0°
8°
Min
Max
.053
.069
.0040
.010
-.059
0.008
0.012
.007
.010
.337
.344
.228
.244
.150
.157
0.025 Basic
.016
.050
0°
8°
A
A
1
c
-Ce
b
SEATING
PLANE
L
.10 (.004)
C
Ordering Information
Part / Order Number
Marking
Shipping Packaging
Package
Temperature
650R-22LF
650R-22LFT
650R-22L
650R-22L
Tubes
Tape and Reel
20-pin SSOP
20-pin SSOP
0 to +70° C
0 to +70° C
“LF” denotes Pb (lead) free package.
While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology (IDT) assumes
no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No
other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications
such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not
recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT
does not authorize or warrant any IDT product for use in life support devices or critical medical instruments.
IDT™ / ICS™ PRV AND STB CLOCK SOURCE
5
ICS650-22
REV F 051310
ICS650-22
PRV AND STB CLOCK SOURCE
CLOCK SYNTHESIZER
Innovate with IDT and accelerate your future networks. Contact:
www.IDT.com
For Sales
For Tech Support
800-345-7015
408-284-8200
Fax: 408-284-2775
www.idt.com/go/clockhelp
Corporate Headquarters
Integrated Device Technology, Inc.
www.idt.com
© 2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device
Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered
trademarks used to identify products or services of their respective owners.
Printed in USA
IMPORTANT NOTICE AND DISCLAIMER
RENESAS ELECTRONICS CORPORATION AND ITS SUBSIDIARIES (“RENESAS”) PROVIDES TECHNICAL
SPECIFICATIONS AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING
REFERENCE DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND
OTHER RESOURCES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS.
These resources are intended for developers skilled in the art designing with Renesas products. You are solely responsible
for (1) selecting the appropriate products for your application, (2) designing, validating, and testing your application, and (3)
ensuring your application meets applicable standards, and any other safety, security, or other requirements. These
resources are subject to change without notice. Renesas grants you permission to use these resources only for
development of an application that uses Renesas products. Other reproduction or use of these resources is strictly
prohibited. No license is granted to any other Renesas intellectual property or to any third party intellectual property.
Renesas disclaims responsibility for, and you will fully indemnify Renesas and its representatives against, any claims,
damages, costs, losses, or liabilities arising out of your use of these resources. Renesas' products are provided only subject
to Renesas' Terms and Conditions of Sale or other applicable terms agreed to in writing. No use of any Renesas resources
expands or otherwise alters any applicable warranties or warranty disclaimers for these products.
(Rev.1.0 Mar 2020)
Corporate Headquarters
Contact Information
TOYOSU FORESIA, 3-2-24 Toyosu,
Koto-ku, Tokyo 135-0061, Japan
www.renesas.com
For further information on a product, technology, the most
up-to-date version of a document, or your nearest sales
office, please visit:
www.renesas.com/contact/
Trademarks
Renesas and the Renesas logo are trademarks of Renesas
Electronics Corporation. All trademarks and registered
trademarks are the property of their respective owners.
© 2020 Renesas Electronics Corporation. All rights reserved.