9VRS4338DKILF

Integrated Device Technology Timing Device Nomenclature There are several part number types in the IDT high-performance timing nomenclature. IDT has acquired product lines from both ICS and Freescale and the established part numbers have been maintained. The timing families can be identified by their marketing part number prefix and are defined in the following charts. TIMING NOMENCLATURE 1 IDT A V B C D ZZZ R -XXX PP G I T I G PP -XXX R ZZZ D C B V A IDT INTEGRATED DEVICE TECHNOLOGY | www.idt.com Packing Designator T = Shipped in Tape & Reel; Blank = Bulk packing (e.g. tube or tray) Operating Temperature Range Blank = 0˚C to 70˚C I = -40˚C to 85˚C E = -20˚C to +70˚C R = -20˚C to +85˚C W1 = AEC-Q100 Grade 1 (-40 to +125˚C) W2 = AEC-Q100 Grade 2 (-40 to +105˚C) W3 = AEC-Q100 Grade 3 (-40 to +85˚C) W4 = AEC-Q100 Grade 4 (0 to +70˚C) Optional Package Designator G = RoHS 6/6 packaging; Blank: RoHS 5/6 packaging Package Optional Dash Number Revision (optional) Specific Part Number Usually one to four digits in length. A dash-number can modify the function. Last two digits may optionally indicate number of outputs Programmable Clocks or Special Process Technology (optional) E = EPROM S = SiGe EE = EEPROM N = FemtoClock NG R = Masked ROM M = Clock IC with integrated MEMS resonator Output Signaling 0 = LVCMOS 1 = HCSL (DIFF) 2 = HSTL 3 = LVPECL 4 = LVDS 5 = 6 = 7 = 8 = 9 = CML/DCM AMI Analog or Sinusoidal SSTL Mixed or Programmable Outputs Product Function 1 = VCXO 3 = Fan Out Buffer 4 = Synthesizer or Frequency Translator (programmable clocks use the optional D character) 5 = SSCG: 1 input, 1 output devices only 6 = Zero-delay Buffer (with and without frequency translation) 7 = Programmable dividers 8 = Application Specific Products Lowest Supported Supply Voltage, or Custom Part Number V = 3.3 V C = Custom part number T = 2.5 V E = Custom part number P = 1.8 V S = Custom part number U = 1.5 V N = 5x7 parts (new numbering scheme included within) K = 1.2 V S = Clone: Competitor part number follows Product Family 4 = MEMS Products 5 = General Purpose Consumer 6 = Custom Consumer 8 = Networking, Communication The “IDT” prefix indicates that the device is part of the timing line of products from IDT. This prefix should not be included as part of the orderable part number. IDT TIMING DEVICE NOMENCLATURE 1 Integrated Device Technology Timing Device Nomenclature TIMING NOMENCLATURE 2 ICS 8 B C D ZZZ R PP I -XXX G T G -XXX I PP R ZZZ D C B 8 ICS INTEGRATED DEVICE TECHNOLOGY | www.idt.com Packing Designator T = Shipped in Tape & Reel; Blank = Bulk packing (e.g. tube or tray) Optional Package Designator G = RoHS 6/6 packaging; Blank: RoHS 5/6 packaging Optional Dash Number Operating Temperature Range I = -40˚C to 85˚C Blank = 0˚C to 70˚C There are a series of bipolar timing devices that are Industrial operating temperature range but do not have “I” in the part number. See datasheet for details. Other non-standard temperature ranges indicated on the datasheet. Package Revision Devices are initially provided at the “A” revision. Improvements are released using subsequent letters of the alphabet.  pecific Part Number S Usually one to four digits in length. A dash-number suffix can modify the function. Last two digits may optionally indicate number of outputs. Special Process Technology (optional) D = Clock Data Recovery device S = Device uses SiGe fab process. Absence of “S” indicates that the part is in another process, usually CMOS or Bipolar. Output Signalling or Part of the Specific Part Number 0 = LVCMOS 1 = HCSL/DCM (PCI Express) 2 = HSTL 3 = LVPECL 4 = LVDS 5 = CML 8 = SSTL 9 = Selectable Product Function 1 = VCXO based device 2 = Internal use only 3 = Non PLL Buffer, single-ended outputs 4 = PLL frequency Synthesizer (internal feedback, input is usually a crystal) 5 = Non PLL Buffer, differential outputs 6 = PLL Zero Delay Buffer (no frequency multiplication/division) 7 = a) Non PLL Buffer/Dividers b) PLL based frequency multiplication/division (external feedback, zero delay type PLLs. Usually use a reference clock rather than a crystal input. An “8” in the first digit location indicates that the product is in the Networking/Communications line of timing products for enterprise-class applications. The Integrated Circuit Systems (“ICS”) prefix indicates that the device is part of the timing line of products from IDT. This is a marketing prefix only, and is not contained in the orderable part number. IDT TIMING DEVICE NOMENCLATURE 2 Timing Device Nomenclature Integrated Device Technology TIMING NOMENCLATURE 3 – NETWORKING AND COMMUNICATIONS WIDE AREA NETWORK PLL IDT 8 ZZZZ V PP I Packing Designator 8 = Shipped in Tape and Reel; Blank = Bulk Packing (e.g. tube or tray) 8 Operating Temperature Range C = 0˚C to 70˚C I or Blank = -40˚C to +85˚C I PP Package Lowest Supply Voltage V = 3.3 V T = 2.5 V P = 1.8 V V Specific Part Number ZZZZ Product Function 8 = Wide Area Network PLL 82 = Wide Area Network PLL, T1/E1 8 The “IDT” prefix indicates that the device is part of the timing line of products from IDT. This prefix should not be included as part of the orderable part number. IDT TIMING NOMENCLATURE 4 – FEMTOCLOCK NG 5x7 CERAMIC IDT 8N C M BBB Y R M DDD PP I 8 I PP DDD M R Y BBB M C 8N IDT Packing Designator 8 = Shipped in Tape & Reel; Blank = Bulk packing (e.g. tube or tray) Operating Temperature Range I = -40˚C to +85˚C; Blank = 0˚C to 70˚C Package CD = ceramic 5x7 Note: no LF or G suffix required for RoHS6/6 Pre-set (default) frequency and APR code (see separate order info table) Internal XTAL frequency 0=114.285MHz 1=100MHz 2=122.88MHz) Die revision (letter) Option Code A = 3.3 V and 100 ppm B = 2.5 V and 100 ppm E = 3.3 V and 50 ppm F = 2.5 V and 50 ppm K = 3.3 V and 20 ppm L = 2.5 V and 20 ppm Product Function 001 = XO V75 / V76 = 6pin VCXO V01 = VCXO 270 / 271 / 272 / 273 / 85 = 6pin XO Number of pre-set (default) frequencies S = Single Q = Quad D = Dual H = 16 Signaling 4 = LVDS 3 = LVPECL 0 = LVCMOS FemtoClock NG 5x7 ceramic-packaged parts The IDT prefix indicates that the device is part of the timing line of products from IDT. This prefix should not be included as part of the orderable part number. Example: IDT 8N3Q001LG-0001CDI8 is a LVPECL FemtoClockNG programmable oscillator, quad output frequency (125, 100, 122.88, 156.25 MHz), 2.5 V, 20 ppm, G-revision, 114.285 MHz XTAL in a RoHS 6/6 ceramic 5x7 package with tape and reel. INTEGRATED DEVICE TECHNOLOGY | www.idt.com IDT TIMING DEVICE NOMENCLATURE 3 Integrated Device Technology Timing Device Nomenclature TIMING NOMENCLATURE 5 – FEMTOCLOCK NG 5x7 10QFN IDT 8N C P A 10 V R -DDD NR G I 8 I G Packing Designator (optional) 8 = Shipped in Tape and Reel; Blank = Bulk Packing (e.g. tube or tray) Operating Temperature Range (optional) I = -40˚C to +85˚C, Blank = 0˚C to 70˚C RoHS 6/6 package Package code (10QFN 5x7) NR Frequency, divider and programming code -DDD Die revision R Supply voltage code: V = 3.3 V P = 1.8 V T = 2.5 V K = 1.2 V V Identifier for the 10QFN-plastic packaged, programmable part platform 10 Architectural code N = integer N PLL feedback and FM XTAL M = integer N PLL and 3OT XTAL W = Fractional-N with L>23bits and 3OT XTAL T = Serial programming interface A F = Fractional N PLL feedback and FM XTAL U = Fractional-N with L=23 bits and 3OT XTAL V = VCXO G = Differential reference and fractional N PLL feedback Plastic package. Immutable identifier for the 10 QFN programmable parts P Signaling 4 = LVDS; 3 = LVPECL; 0 = LVCMOS C FemtoClock NG 5x7 plastic-packaged parts 8N The IDT prefix indicates that the device is part of the timing line of products from IDT. This prefix should not be included as part of the orderable part number. IDT Example: IDT 8N3PN10VA-001NRGI8 is a LVPECL FemtoClockNG programmable clock generator with an internal integer-N feedback PLL, with the frequency coded by “001”, 3.3 V, A-revision, in a RoHS 6/6 plastic 5x7 package (10QFN), industrial temperature and with tape and reel. TIMING NOMENCLATURE 6 – MEMS PROGRAMMABLE DEVICES IDT 4x A FFFFF R C V Y PPP I 8 I PPP Y V C R FFFFF A 4x IDT INTEGRATED DEVICE TECHNOLOGY | www.idt.com Packing Designator 8 = Shipped in Tape and Reel; Blank = Bulk Packing (e.g. tube or tray) Operating Temperature Range I = -40°C to +85°C, Blank = 0˚C to 70˚C Package code CUG = 7050; CTG = 5032; CXG = 3225 Option code (ppm, etc.) Voltage Signaling 3 = LVPECL; 4 = LVDS; 0 = LVCMOS Die revision Frequency Code Architectural code and pinout arrangement MEMS Family Designator 4M = Standard Differential Oscillators 4H = Performance Differential Oscillators 4E = Enhanced Differential Oscillator 4C = Enhanced CMOS Oscillator The IDT prefix indicates that the device is part of the timing line of products from IDT. This prefix should not be included as part of the orderable part number. IDT TIMING DEVICE NOMENCLATURE 4 Integrated Device Technology Timing Device Nomenclature TIMING NOMENCLATURE 7 – IDT PC CLOCK NOMENCLATURE ICS 9 XXXX ZZZ R LF P T LF P Packing Designator (optional) T = Shipped in Tape and Reel; Blank = Bulk Packing (e.g. tube or tray) Optional Package Designator LF = Lead Free, RoHS Compliant Package Type Revision Designator (does not correspond with Data sheet revision number) R Specific Part Number ZZZ Series Indicator Combination of 1 to 4 alphabets or digits that indicate a series of clocks designated to a specific technology or chipset platform XXXX A ‘9’ in the first digit location indicates that the products is an highly integrated clock devices specially designed for computing or server applications 9 ICS The Integrated Circuit Systems (“ICS”) prefix indicates that the device is part of the timing line of products from IDT. This is a marketing prefix only, and is not contained in the orderable part number TIMING NOMENCLATURE 8 MPC/MC 88, 9, 100ES ZZZZ PP R2 Packing Designator (optional) R2 = Shipped in Tape and Reel; Blank = Bulk Packing (e.g. tube or tray) PP Package Type The two alpha characters in this position indicates the package type. See datasheet for package details. ZZZZ 88, 9, 100ES MPC/MC INTEGRATED DEVICE TECHNOLOGY | www.idt.com Specific Part Number Three, four or five digits in length. Product Function 88 = Freescale “88K” Legacy devices. 9 = LVCMOS PLL based clock or LVCMOS buffer. 100ES = SiGe fab process and is a differential buffer. T he “MPC” or “MC” prefix indicates that the device is part of the timing line of products that were obtained from Freescale Semiconductor. This prefix must be included as part of the orderable part number. IDT TIMING DEVICE NOMENCLATURE 5