EL1517IL-T13

DATA SHORT To request the full datasheet, please visit www.intersil.com/products/EL1517 EL1517 xDSL Differential Line Driver OBSOLETE PRODUCT NO RECOMMENDED REPLACEMENT contact our Technical Support Center at 1-888-INTERSIL or www.intersil.com/tsc The EL1517 is a dual operational amplifier designed for VDSL and ADSL line driving in DMT based solutions. This device features a high drive capability of 250mA while consuming only 7mA of supply current per amplifier and operating from a single 5V to 12V supply. This driver achieves a typical distortion of -80dBc, at 150kHz into a 25 load. The EL1517 is available in the industry-standard 8 Ld SOIC and the thermally-enhanced 16 Ld QFN packages. All are specified for operation over the full -40°C to +85°C temperature range. The 16 Ld QFN package option has control pins C0 and C1 for controlling the bias and enable/disable of the outputs. These controls allow for lowering the power to fit the performance/power ratio for the application. The EL1517 is ideal for ADSL, SDSL, HDSL2 and VDSL line driving applications. FN7425 Rev 4.00 August 8, 2006 Features • Drives up to 250mA from a +12V supply • 18VP-P differential output drive into 50 • 20VP-P differential output drive into 100 • -80dBc typical driver output distortion at full output at 150kHz • -75dBc typical driver output distortion at 3.75MHz • -60dBc typical driver output distortion at 8MHz • -50dBc typical driver output distortion at 16MHz • Low quiescent current of 7mA per amplifier • 200MHz bandwidth • Use for single or dual supply applications • Pb-free plus anneal available (RoHS compliant) Applications Ordering Information • VDSL line drivers - MDP0027 EL1517IS-T7 1517IS 8 Ld SOICIC 7” MDP0027 EL1517IS-T13 1517IS 8 Ld SOICIC 13” MDP0027 EL1517ISZ (Note) 1517ISZ 8 Ld SOICIC (Pb-Free) - MDP0027 EL1517ISZ-T7 (Note) 1517ISZ 8 Ld SOICIC (Pb-Free) 7” MDP0027 EL1517ISZ-T13 (Note) 1517ISZ 8 Ld SOIC (Pb-Free) 13” MDP0027 EL1517IL 1517IL 16 Ld QFN - MDP0046 EL1517IL-T7 1517IL 16 Ld QFN 7” MDP0046 EL1517IL-T13 1517IL 16 Ld QFN 13” MDP0046 EL1517ILZ (Note) 1517ILZ 16 Ld QFN (Pb-Free) - MDP0046 EL1517ILZ-T7 (Note) 1517ILZ 16 Ld QFN (Pb-Free) 7” MDP0046 EL1517ILZ-T13 (Note) 1517ILZ 16 Ld QFN (Pb-Free) 13” MDP0046 • G.SHDSL, HDSL2 line drivers • HomePlug networking drivers Pinouts EL1517 (8 LD SOIC) TOP VIEW OUTA 1 INA- 2 7 OUTB + INA+ 3 6 INB+ GND 4 5 INB+ 16 OUTA EL1517 (16 LD QFN) TOP VIEW NC 1 12 NC 11 INB- INA- 2 VS-* INA+ 3 10 INB+ 9 C1 GND 4 NC 5 NOTE: Intersil Pb-free plus anneal products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin plate termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020. 8 VS 13 OUTB 8 Ld SOICIC C0 8 1517IS 14 VS+ EL1517IS • ADSL full rate CPE line driving VS- 7 PART NUMBER 15 NC PKG. DWG. # NC 6 PACKAGE TAPE & REEL PART MARKING *THERMAL PAD MUST BE CONNECTED TO NEGATIVE SUPPLY: VS-. QFN PACKAGE CAN BE USED IN DUAL SUPPLY APPLICATIONS. FN7425 Rev 4.00 August 8, 2006 Page 1 of 2 EL1517 © Copyright Intersil Americas LLC 2004-2006. All Rights Reserved. All trademarks and registered trademarks are the property of their respective owners. For additional products, see www.intersil.com/en/products.html Intersil products are manufactured, assembled and tested utilizing ISO9001 quality systems as noted in the quality certifications found at www.intersil.com/en/support/qualandreliability.html Intersil products are sold by description only. Intersil may modify the circuit design and/or specifications of products at any time without notice, provided that such modification does not, in Intersil's sole judgment, affect the form, fit or function of the product. Accordingly, the reader is cautioned to verify that datasheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see www.intersil.com FN7425 Rev 4.00 August 8, 2006 Page 2 of 2