EL1527CREZ-T7

OBSOLETE PRODUCT NO RECOMMENDED REPLACEMENT contact our Technical Support Center at 1-888-INTERSIL or www.intersil.com/tsc DATA SHORT To request the full datasheet, please visit www.intersil.com/products/EL1527 EL1527 FN7341 Rev 2.00 June 25, 2008 Dual Channel Medium Power Differential Line Driver The EL1527 is a very low power dual channel differentiated amplifier designed for central office and customer premise line driving for DMT ADSL solutions. This device features a high drive capability of 400mA while consuming only 7.5mA of supply current per amplifier from ±12V supplies. This driver achieves a typical distortion of less than -75dBc, at 1MHz into a 50 load. The EL1527 has two control pins, C0 and C1, per channel. With the selection of C0 and C1, the device can be set into full-IS power, 3/4-IS power, 1/2-IS power, and power-down disable modes. The EL1527 maintains excellent distortion and load driving capabilities even in the lowest power settings. Features • Drives 360mA at 16VP-P on ±12V supplies • 40VP-P differential output drive into 100 • -75dBc typical driver output distortion driving 50 at 1MHz and 1/2-IS bias current • Low quiescent current of 3.5mA per amplifier in 1/2-IS mode • Power-down disable mode • Pb-free available (RoHS compliant) Applications The EL1527 is available in the thermally-enhanced 28 Ld HTSSOP package. This device is specified for operation over the full -40°C to +85°C temperature range. • ADSL G.DMT and G.lite CO line driving Ordering Information • Video distribution amplifier PART NUMBER PART MARKING TEMP. RANGE (°C) PACKAGE • G.SHDSL, HDSL2 line driver • ADSL CPE line driving PKG. DWG. # EL1527CRE 1527CRE -40 to +85 28 Ld HTSSOP MDP0048 EL1527CRE-T7* 1527CRE -40 to +85 28 Ld HTSSOP MDP0048 EL1527CRE-T13* 1527CRE -40 to +85 28 Ld HTSSOP MDP0048 EL1527CREZ (See Note) 1527CREZ -40 to +85 28 Ld HTSSOP MDP0048 (Pb-Free) EL1527CREZ-T7* (See Note) 1527CREZ -40 to +85 28 Ld HTSSOP MDP0048 (Pb-Free) EL1527CREZ-T13 1527CREZ -40 to +85 28 Ld HTSSOP MDP0048 (See Note) (Pb-Free) *Please refer to TB347 for details on reel specifications. NOTE: These Intersil Pb-free plastic packaged products employ special Pb-free material sets, molding compounds/die attach materials, and 100% matte tin plate plus anneal (e3 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations). Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020. • Video twisted-pair line driver Pinout EL1527 (28 LD HTSSOP) TOP VIEW VS-(1) 1 C0(1) 2 27 NC C1(1) 3 26 NC INB+(1) 4 25 INA+(1) INB-(1) 5 24 INA-(1) OUTB(1) 6 VS+(2) 7 NC 8 OUTA(2) 9 23 OUTA THERMAL PAD 22 NC 21 VS+(1) 20 OUTB(2) INA-(2) 10 19 INB-(2) INS+(2) 11 18 INB+(2) NC 12 17 C1(2) NC 13 16 C0(2) GND(2) 14 FN7341 Rev 2.00 June 25, 2008 28 GND(1) 15 VS-(2) Page 1 of 2 EL1527 © Copyright Intersil Americas LLC 2002-2008. All Rights Reserved. All trademarks and registered trademarks are the property of their respective owners. For additional products, see www.intersil.com/en/products.html Intersil products are manufactured, assembled and tested utilizing ISO9001 quality systems as noted in the quality certifications found at www.intersil.com/en/support/qualandreliability.html Intersil products are sold by description only. Intersil may modify the circuit design and/or specifications of products at any time without notice, provided that such modification does not, in Intersil's sole judgment, affect the form, fit or function of the product. Accordingly, the reader is cautioned to verify that datasheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see www.intersil.com FN7341 Rev 2.00 June 25, 2008 Page 2 of 2