EL5293ACY-T13

WD ® R NE63 O F L5 2 D ED MEN L5260, E M O R EC SE E E Data Sheet NOT ESIG NS July 26, 2007 Dual 300MHz Current Feedback Amplifier with Enable The EL5293 and EL5293A represent dual current feedback amplifiers with a bandwidth of 300MHz. This makes these amplifiers ideal for today’s high speed video and monitor applications. With a supply current of just 4mA per amplifier and the ability to run from a single supply voltage from 5V to 10V, these amplifiers are also ideal for hand held, portable or battery powered equipment. The EL5293A also incorporates an enable and disable function to reduce the supply current to 100µA typical per amplifier. Allowing the CE pin to float or applying a low logic level will enable the amplifier. The EL5293 is offered in the industry-standard 8 Ld SOIC package and the space-saving 8 Ld MSOP package. The EL5293A is available in a 10 Ld MSOP package and all operate over the industrial temperature range of -40°C to +85°C. PART NUMBER FN7193.3 Features • 300MHz -3dB bandwidth • 4mA supply current (per amplifier) • Single and dual supply operation, from 5V to 10V • Fast enable/disable (EL5293A only) • Single (EL5193) and triple (EL5393) available • High speed, 1GHz product available (EL5191) • High speed, 6mA, 600MHz product available (EL5192, EL5292, and EL5392) • Pb-free plus anneal available (RoHS compliant) Applications • Battery-powered equipment • Hand-held, portable devices • Video amplifiers • Cable drivers • RGB amplifiers Ordering Information PART MARKING EL5293, EL5293A PACKAGE PKG. DWG. # • Test equipment • Instrumentation EL5293CS 5293CS 8 Ld SOIC MDP0027 • Current to voltage converters EL5293CS-T7* 5293CS 8 Ld SOIC MDP0027 Pinouts EL5293CS-T13* 5293CS 8 Ld SOIC MDP0027 EL5293CSZ (Note) 5293CSZ 8 Ld SOIC (Pb-free) MDP0027 EL5293CSZ-T7* (Note) 5293CSZ 8 Ld SOIC (Pb-free) MDP0027 EL5293CSZ-T13* (Note) 5293CSZ 8 Ld SOIC (Pb-free) MDP0027 EL5293CY V 8 Ld MSOP MDP0043 EL5293CY-T7* V 8 Ld MSOP MDP0043 EL5293CY-T13* V 8 Ld MSOP MDP0043 EL5293ACY Y 10 Ld MSOP MDP0043 EL5293ACY-T7* Y 10 Ld MSOP MDP0043 EL5293ACY-T13* Y 10 Ld MSOP MDP0043 OUTA 1 INA- 2 8 VS+ + 7 OUTB 6 INB- INA+ 3 NOTE: Intersil Pb-free plus anneal products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin plate termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020. + VS- 4 5 INB+ EL5293A (10 LD MSOP) TOP VIEW INA+ 1 CEA 2 *Please refer to TB347 for details on reel specifications. 1 EL5293 (8 LD SOIC, MSOP) TOP VIEW 10 INA+ VS- 3 CEB 4 INB+ 5 9 OUTA 8 VS+ + - 7 OUTB 6 INB- CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc. Copyright Intersil Americas Inc. 2003, 2005, 2007. All Rights Reserved All other trademarks mentioned are the property of their respective owners. EL5293, EL5293A Absolute Maximum Ratings (TA = +25°C) Thermal Information Supply Voltage between VS+ and VS- . . . . . . . . . . . . . . . . . . . . . 11V Pin Voltages . . . . . . . . . . . . . . . . . . . . . . . . .VS- - 0.5V to VS+ +0.5V Maximum Continuous Output Current . . . . . . . . . . . . . . . . . . . 50mA Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . .-65°C to +150°C Ambient Operating Temperature . . . . . . . . . . . . . . . .-40°C to +85°C Operating Junction Temperature . . . . . . . . . . . . . . . . . . . . . . +125°C Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Curves Pb-free reflow profile . . . . . . . . . . . . . . . . . . . . . . . . . .see link below http://www.intersil.com/pbfree/Pb-FreeReflow.asp CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product reliability and result in failures not covered by warranty. Electrical Specifications PARAMETER VS+ = +5V, VS- = -5V, RF = 750Ω for AV = 1, RF = 375Ω for AV = 2, RL = 150Ω, TA = +25°C unless otherwise specified. DESCRIPTION CONDITIONS MIN (Note 2) TYP MAX (Note 2) UNIT AC PERFORMANCE BW -3dB Bandwidth AV = +1 300 MHz AV = +2 200 MHz 20 MHz 2200 V/µs BW1 0.1dB Bandwidth SR Slew Rate VO = -2.5V to +2.5V, AV = +2 tS 0.1% Settling Time VOUT = -2.5V to +2.5V, AV = -1 12 ns CS Channel Separation f = 5MHz 60 dB eN Input Voltage Noise 4.4 nV/√Hz iN- IN- Input Current Noise 17 pA/√Hz iN+ IN+ Input Current Noise 50 pA/√Hz dG Differential Gain Error (Note 1) AV = +2 0.03 % dP Differential Phase Error (Note 1) AV = +2 0.04 ° 1900 DC PERFORMANCE VOS Offset Voltage TCVOS Input Offset Voltage Temperature Coefficient Measured from TMIN to TMAX ROL Transimpediance -10 1 10 mV 5 µV/°C 300 600 kΩ INPUT CHARACTERISTICS CMIR Common Mode Input Range ±3 ±3.3 V CMRR Common Mode Rejection Ratio 42 50 dB +IIN + Input Current -60 1 80 µA -IIN - Input Current -35 1 35 µA RIN Input Resistance 45 kΩ CIN Input Capacitance 0.5 pF OUTPUT CHARACTERISTICS VO RL = 150Ω to GND ±3.4 ±3.7 V RL = 1kΩ to GND ±3.8 ±4.0 V Output Current RL = 10Ω to GND 95 120 mA ISON Supply Current - Enabled (per amplifier) No load, VIN = 0V 3 4 5 mA ISOFF Supply Current - Disabled (per amplifier) No load, VIN = 0V 100 150 µA PSRR Power Supply Rejection Ratio DC, VS = ±4.75V to ±5.25V IOUT Output Voltage Swing SUPPLY 2 55 75 dB FN7193.3 July 26, 2007 EL5293, EL5293A Electrical Specifications PARAMETER -IPSR VS+ = +5V, VS- = -5V, RF = 750Ω for AV = 1, RF = 375Ω for AV = 2, RL = 150Ω, TA = +25°C unless otherwise specified. (Continued) DESCRIPTION - Input Current Power Supply Rejection CONDITIONS DC, VS = ±4.75V to ±5.25V MIN (Note 2) TYP -2 MAX (Note 2) UNIT 2 µA/V ENABLE (EL5293A ONLY) tEN Enable Time 40 ns tDIS Disable Time 600 ns IIHCE CE Pin Input High Current CE = VS+ 0.8 6 µA IILCE CE Pin Input Low Current CE = VS- 0 -0.1 µA VIHCE CE Input High Voltage for Power-down VILCE CE Input Low Voltage for Power-down VS+ - 1 V VS+ - 3 V NOTE: 1. Standard NTSC test, AC signal amplitude = 286mVP-P, f = 3.58MHz 2. Parts are 100% tested at +25°C. Over-temperature limits established by characterization and are not production tested. 3 FN7193.3 July 26, 2007 EL5293, EL5293A Typical Performance Curves Non-Inverting Frequency Response (Gain) Non-Inverting Frequency Response (Phase) 6 90 AV=1 0 2 AV=2 AV=2 -2 Phase (°) Normalized Magnitude (dB) AV=1 AV=5 -6 -90 AV=5 -180 AV=10 AV=10 -10 -270 -14 1M RF=750Ω RL=150Ω 10M 100M -360 1M 1G RF=750Ω RL=150Ω 10M Frequency (Hz) Inverting Frequency Response (Gain) 90 AV=-1 2 AV=-1 AV=-2 0 -2 Phase (°) Normalized Magnitude (dB) 1G Inverting Frequency Response (Phase) 6 AV=-3 -6 -10 -90 AV=-2 AV=-3 -180 -270 -14 1M RF=500Ω RL=150Ω 10M 100M -360 1M 1G RF=500Ω RL=150Ω 10M Frequency Response for Various CIN- 2pF added 1pF added 2 -2 0pF added AV=2 RF=500Ω RL=150Ω 10M 100M Frequency (Hz) 4 1G Normalized Magnitude (dB) 6 6 -10 1M 1G Frequency Response for Various RL 10 -6 100M Frequency (Hz) Frequency (Hz) Normalized Magnitude (dB) 100M Frequency (Hz) 2 RL=100Ω -2 RL=500Ω RL=150Ω -6 -10 -14 1M AV=2 RF=500Ω 10M 100M 1G Frequency (Hz) FN7193.3 July 26, 2007 EL5293, EL5293A Typical Performance Curves (Continued) Frequency Response for Various CL Frequency Response for Various RF 6 AV=2 RL=150Ω RF=RG=500Ω 10 33pF 340Ω Normalized Magnitude (dB) Normalized Magnitude (dB) 14 22pF 6 15pF 2 8pF -2 620Ω -2 750Ω -6 1.2kΩ -10 0pF -6 1M 10M 100M -14 1M 1G AV=2 RG=RF RL=150Ω 10M Frequency (Hz) Group Delay vs Frequency 1G Frequency Response for Various Common-Mode Input Voltages 6 VCM=3V Normalized Magnitude (dB) 3 AV=2 RF=500Ω 2.5 Delay (ns) 100M Frequency (Hz) 3.5 2 1.5 AV=1 RF=750Ω 1 0.5 0 1M 10M 100M -2 VCM=-3V -6 -10 -14 1M 1G VCM=0V 2 AV=2 RF=500Ω RL=150Ω 10M Frequency (Hz) 100M 1G Frequency (Hz) Transimpedance (ROL) vs Frequency PSRR and CMRR vs Frequency 20 10M Phase 0 0 100k -180 10k Gain -270 1k Phase (°) -90 PSRR/CMRR (dB) 1M Magnitude (Ω) 475Ω 2 PSRR+ -20 PSRR-40 CMRR -60 -360 100 1k 10k 100k 1M 10M Frequency (Hz) 5 100M 1G -80 10k 100k 1M 10M 100M 1G Frequency (Hz) FN7193.3 July 26, 2007 EL5293, EL5293A Typical Performance Curves (Continued) -3dB Bandwidth vs Supply Voltage for Non-Inverting Gains -3dB Bandwidth vs Supply Voltage for Inverting Gains 400 250 RF=750Ω RL=150Ω AV=1 -3dB Bandwidth (MHz) -3dB Bandwidth (MHz) 350 300 250 200 AV=2 150 AV=5 100 200 AV=-1 150 AV=-2 100 AV=-5 50 50 RF=500Ω RL=150Ω AV=10 0 5 0 6 7 8 9 10 5 6 7 Total Supply Voltage (V) 9 10 Peaking vs Supply Voltage for Inverting Gains Peaking vs Supply Voltage for Non-Inverting Gains 4 2.5 RF=750Ω RL=150Ω AV=1 3.5 RF=500Ω RL=150Ω 2 Peaking (dB) 3 Peaking (dB) 8 Total Supply Voltage (V) 2.5 2 1.5 AV=2 1 1.5 AV=-1 1 AV=-2 0.5 0.5 0 5 AV=10 6 7 8 9 0 5 10 6 7 -3dB Bandwidth vs Temperature for Non-Inverting Gains 10 250 RF=750Ω RL=150Ω 400 200 -3dB Bandwidth (MHz) -3dB Bandwidth (MHz) 9 -3dB Bandwidth vs Temperature for Inverting Gains 500 AV=1 300 200 AV=2 100 AV=5 0 -40 8 Total Supply Voltage (V) Total Supply Voltage (V) AV=10 10 60 110 Ambient Temperature (°C) 6 160 AV=-1 AV=-2 150 100 AV=-5 50 0 -40 RF=500Ω RL=150Ω 10 60 110 160 Ambient Temperature (°C) FN7193.3 July 26, 2007 EL5293, EL5293A Typical Performance Curves (Continued) Peaking vs Temperature Voltage and Current Noise vs Frequency 2.5 1k RL=150Ω 2 Voltage Noise (nV/√Hz) Current Noise (pA/√Hz) Peaking (dB) AV=1 1.5 1 0.5 AV=-1 0 -0.5 -40 10 60 110 in+ 100 in10 en 1 100 160 1k 10k 100 10 10 8 Supply Current (mA) Output Impedance (Ω) 1M 10M Supply Current vs Supply Voltage Closed Loop Output Impedance vs Frequency 1 0.1 0.01 0.001 6 4 2 0 100 1k 10k 100k 1M 10M 100M 0 1G 2 4 6 8 10 12 Supply Voltage (V) Frequency (Hz) 2nd and 3rd Harmonic Distortion vs Frequency Two-Tone 3rd Order Input Referred Intermodulation Intercept (IIP3) -20 25 Input Power Intercept (dBm) AV=+2 VOUT=2VP-P RL=100Ω -30 Harmonic Distortion (dBc) 100k Frequency (Hz) Ambient Temperature (°C) -40 2nd Order Distortion -50 3rd Order Distortion -60 -70 -80 -90 1 10 Frequency (MHz) 7 100 20 AV=+2 RL=150Ω 15 10 5 0 -5 -10 10 AV=+2 RL=100Ω 100 Frequency (MHz) FN7193.3 July 26, 2007 EL5293, EL5293A Typical Performance Curves (Continued) Differential Gain/Phase vs DC Input Voltage at 3.58MHz Differential Gain/Phase vs DC Input Voltage at 3.58MHz 0.03 0.04 AV=2 RF=RG=500Ω RL=150Ω dG (%) or dP (°) 0.01 0.02 0 dG -0.01 -0.02 -0.01 -0.04 -0.03 0 0.5 dG 0 -0.02 -0.5 -0.04 -1 1 dP 0.01 -0.03 -0.05 -1 AV=1 RF=750Ω RL=500Ω 0.03 dP dG (%) or dP (°) 0.02 -0.5 DC Input Voltage 0 0.5 1 DC Input Voltage Output Voltage Swing vs Frequency THD