DATASHEET
EL5164, EL5165, EL5364
FN7389
Rev 9.00
January 30, 2014
600MHz Current Feedback Amplifiers with Enable
The EL5164, EL5165, and EL5364 are current feedback
amplifiers with a very high bandwidth of 600MHz. This makes
these amplifiers ideal for today’s high speed video and monitor
applications.
Features
With a supply current of just 3.5mA per amplifier and the
ability to run from a single supply voltage from 5V to 12V,
these amplifiers are also ideal for handheld, portable or
battery-powered equipment.
• 3.5mA supply current
The EL5164 and EL5364 also incorporate an enable and
disable function to reduce the supply current to 14µA typical
per amplifier. Allowing the CE pin to float, or applying a low
logic level, enables the amplifier.
The EL5165 is offered in the 5 Ld SOT-23 package, EL5164 is
available in the 6 Ld SOT-23 and the industry-standard 8 Ld SOIC
packages, and the EL5364 in a 16 Ld SOIC and 16 Ld QSOP
packages. All operate over the industrial temperature range of
-40°C to +85°C.
• 600MHz -3dB bandwidth
• 4700V/µs slew rate
• Single and dual supply operation, from 5V to 12V supply span
• Fast enable/disable (EL5164 and EL5364 only)
• Available in SOT-23 packages
• High speed, 1.4GHz product available (EL5166 and EL5167)
• 500MHz products available in Single (EL5162, EL5163), Dual
(EL5262, EL5263) and Triple (EL5362)
• Pb-Free (RoHS compliant)
Applications
• Video amplifiers
• Cable drivers
• RGB amplifiers
• Test equipment
• Instrumentation
• Current to voltage converters
Pin Configurations
EL5164
(6 LD SOT-23)
TOP VIEW
EL5164
(8 LD SOIC)
TOP VIEW
NC 1
IN- 2
IN+ 3
VS- 4
FN7389 Rev 9.00
January 30, 2014
+
8 CE
OUT 1
7 VS+
VS- 2
6 OUT
IN+ 3
6 VS+
+ -
5 CE
4 IN-
5 NC
Page 1 of 17
EL5164, EL5165, EL5364
Pin Configurations
EL5364
(16 LD SOIC, QSOP)
TOP VIEW
EL5165
(5 LD SOT-23)
TOP VIEW
OUT 1
VS- 2
IN+ 3
16 INA-
INA+ 1
5 VS+
CEA 2
+ -
+
14 VS+
VS- 3
4 IN-
CEB 4
+
-
11 NC
NC 6
INC+ 8
13 OUTB
12 INB-
INB+ 5
CEC 7
15 OUTA
+
-
10 OUTC
9 INC-
Ordering Information
PART NUMBER
(Notes 2, 3)
PART
MARKING
PACKAGE
(Pb-free)
PKG.
DWG. #
EL5164ISZ
5164ISZ
8 Ld SOIC (150 mil)
M8.15E
EL5164ISZ-T7 (Note 1)
5164ISZ
8 Ld SOIC (150 mil)
M8.15E
EL5164ISZ-T13 (Note 1)
5164ISZ
8 Ld SOIC (150 mil)
M8.15E
EL5164IWZ-T7 (Note 1)
BAMA (Note 4)
6 Ld SOT-23
P6.064A
EL5164IWZ-T7A (Note 1)
BAMA (Note 4)
6 Ld SOT-23
P6.064A
EL5165IWZ-T7 (Note 1)
BANA (Note 4)
5 Ld SOT-23
P5.064A
EL5165IWZ-T7A (Note 1)
BANA (Note 4)
5 Ld SOT-23
P5.064A
EL5364ISZ
EL5364ISZ
16 Ld SOIC (150 mil)
MDP0027
EL5364ISZ-T7 (Note 1)
EL5364ISZ
16 Ld SOIC (150 mil)
MDP0027
EL5364ISZ-T13 (Note 1)
EL5364ISZ
16 Ld SOIC (150 mil)
MDP0027
EL5364IUZ
5364IUZ
16 Ld QSOP (150 mil)
MDP0040
EL5364IUZ-T7 (Note 1)
5364IUZ
16 Ld QSOP (150 mil)
MDP0040
EL5364IUZ-T13 (Note 1)
5364IUZ
16 Ld QSOP (150 mil)
MDP0040
EL5364IUZA
5364IUZ
16 Ld QSOP (150 mil)
MDP0040
EL5364IUZA-T7 (Note 1)
5364IUZ
16 Ld QSOP (150 mil)
MDP0040
EL5364IUZA-T13 (Note 1)
5364IUZ
16 Ld QSOP (150 mil)
MDP0040
NOTES:
1. Please refer to TB347 for details on reel specifications.
2. These Intersil Pb-free plastic packaged products employ special Pb-free material sets, molding compounds/die attach materials, and 100% matte
tin plate plus anneal (e3 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations). Intersil
Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
3. For Moisture Sensitivity Level (MSL), please see product information page for EL5164, EL5165, EL5364. For more information on MSL, please see
tech brief TB363.
4. The part marking is located on the bottom of the part.
FN7389 Rev 9.00
January 30, 2014
Page 2 of 17
EL5164, EL5165, EL5364
Absolute Maximum Ratings (TA = +25°C)
Thermal Information
Supply Voltage between VS+ and VS-. . . . . . . . . . . . . . . . . . . . . . . . . . 13.2V
Maximum Continuous Output Current . . . . . . . . . . . . . . . . . . . . . . . . . 50mA
Pin Voltages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . (VS-) - 0.5V to (VS+) + 0.5V
Supply Slewrate between VS+ and VS-. . . . . . . . . . . . . . . . . . . . 1V/µs(Max)
VIN-DIFF (VIN+ - VIN-) (When Disabled) . . . . . . . . . . . . . . . . . . . . . . ±2V (Max)
Maximum Power Dissipation . . . . . . . . . . . . . . . . . . . see curves on page 8
Maximum Storage Temperature Range . . . . . . . . . . . . . -65°C to +150°C
Ambient Operating Temperature Range . . . . . . . . . . . . . . -40°C to +85°C
Maximum Operating Junction Temperature . . . . . . . . . . . . . . . . . . +125°C
Pb-free reflow profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product
reliability and result in failures not covered by warranty
Electrical Specifications VS+ = +5V, VS- = -5V, RF = 750 for AV = 1, RF = 375 for AV = 2, RL = 150, VCE = 0V, TA = +25°C unless
otherwise specified. Boldface limits apply across the operating temperature range, -40°C to +85°C.
PARAMETER
DESCRIPTION
CONDITIONS
MIN
(Note 6)
Typ
MAX
(Note 6)
UNIT
AC PERFORMANCE
BW
-3dB Bandwidth
AV = +1, RL = 500RF = 510
600
MHz
AV = +2, RL = 150RF = 412
450
MHz
50
MHz
BW1
0.1dB Bandwidth
AV = +2, RL = 150RF = 412
SR
Slew Rate
VOUT = -3V to +3V, AV = +2, RL = 100
(EL5164, EL5165)
3500
4700
7000
V/µs
VOUT = -3V to +3V, AV = +2, RL = 100
(EL5364)
3000
4200
6000
V/µs
tS
0.1% Settling Time
VOUT = -2.5V to +2.5V, AV = +2,
RF = RG = 1k
15
ns
eN
Input Voltage Noise
f = 1MHz
2.1
nV/Hz
iN-
IN- Input Current Noise
f = 1MHz
13
pA/Hz
iN+
IN+ Input Current Noise
f = 1MHz
13
pA/Hz
HD2
5MHz, 2.5VP-P
-81
dBc
HD3
5MHz, 2.5VP-P
-74
dBc
dG
Differential Gain Error (Note 5)
AV = +2
0.01
%
dP
Differential Phase Error (Note 5)
AV = +2
0.01
°
DC PERFORMANCE
VOS
Offset Voltage
TCVOS
Input Offset Voltage Temperature
Coefficient
ROL
Open Loop Transimpedance Gain
-5
Measured from TMIN to TMAX
1.5
+5
mV
6
µV/°C
1.1
3
M
V
INPUT CHARACTERISTICS
CMIR
Common Mode Input Range
Guaranteed by CMRR test
±3
±3.3
CMRR
Common Mode Rejection Ratio
VIN = ±3V
50
62
75
dB
-ICMR
- Input Current Common Mode Rejection
-1
0.1
+1
µA/V
+IIN
+ Input Current
-10
2
+10
µA
-IIN
- Input Current
-10
2
+10
µA
RIN
Input Resistance
300
650
1200
k
CIN
Input Capacitance
FN7389 Rev 9.00
January 30, 2014
+ Input
1
pF
Page 3 of 17
EL5164, EL5165, EL5364
Electrical Specifications VS+ = +5V, VS- = -5V, RF = 750 for AV = 1, RF = 375 for AV = 2, RL = 150, VCE = 0V, TA = +25°C unless
otherwise specified. Boldface limits apply across the operating temperature range, -40°C to +85°C. (Continued)
MIN
(Note 6)
Typ
MAX
(Note 6)
UNIT
RL = 150 to GND
±3.6
±3.8
±4.0
V
RL = 1k to GND
±3.9
±4.1
±4.2
V
Output Current
RL = 10 to GND
100
140
190
mA
ISON
Supply Current - Enabled, per Amplifier
No load, VIN = 0V
3.2
3.5
4.2
mA
ISOFF+
Supply Current - Disabled, per Amplifier
+25
µA
ISOFF-
Supply Current - Disabled, per Amplifier
No load, VIN = 0V, EL5164 and EL5364
Only
-25
-14
0
µA
PSRR
Power Supply Rejection Ratio
DC, VS = ±4.75V to ±5.25V
65
79
-IPSR
- Input Current Power Supply Rejection
DC, VS = ±4.75V to ±5.25V
-1
0.1
PARAMETER
DESCRIPTION
CONDITIONS
OUTPUT CHARACTERISTICS
VO
IOUT
Output Voltage Swing
SUPPLY
0
dB
+1
µA/V
ENABLE (EL5164, EL5364 ONLY)
tEN
Enable Time
200
ns
tDIS
Disable Time
800
ns
IIHCE
CE Pin Input High Current
CE = VS+
1
10
+25
µA
IILCE
CE Pin Input Low Current
CE = (VS+) -5V
-1
0
+1
µA
VIHCE
CE Input High Voltage for Power-down
VILCE
CE Input Low Voltage for Power-up
(VS+) - 1
V
(VS+) - 3
V
NOTES:
5. Standard NTSC test, AC signal amplitude = 286mVP-P, f = 3.58MHz
6. Parameters with MIN and/or MAX limits are 100% tested at +25°C, unless otherwise specified. Temperature limits established by characterization
and are not production tested.
FN7389 Rev 9.00
January 30, 2014
Page 4 of 17
EL5164, EL5165, EL5364
Typical Performance Curves
5
3
±VS = ±5V
AV = +2
5
RF = 1.2k, C L= 5pF
4
RF = 1.2k, CL = 3.5pF
NORMALIZED GAIN (dB)
NORMALIZED GAIN (dB)
4
RF = 1.2k, CL = 2.5pF
2
RF = 1.2k, CL = 0.8pF
1
0
RF = 1.5k, CL = 0.8pF
-1
RF = 1.8k, CL = 0.8pF
RF = 2.2k, CL = 0.8pF
-2
-3
3
±VS = ±5V
CL = 2.5pF
AV = +5
RF = 160, RG = 41
1
0
RF = 300, RG = 75
RF = 360, RG = 87
-1
-2
RF = 397, RG = 97
RF = 412, RG = 100
RF = 560, RG = 135
-3
-4
-4
-5
100k
1M
10M
100M
-5
100k
1G
1M
6
1G
5
±VS = ±5V
CL = 2.5pF
AV = +1
4
NORMALIZED GAIN (dB)
NORMALIZED GAIN (dB)
100M
FIGURE 2. FREQUENCY RESPONSE FOR VARIOUS RF
FIGURE 1. FREQUENCY RESPONSE FOR VARIOUS RF AND CL
4
10M
FREQUENCY (Hz)
FREQUENCY (Hz)
5
RF = 220, RG = 55
2
RF = 510
3
2
RF = 681
1
0
-1
RF = 750
-2
RF = 909
-3
RF = 1201
-4
100k
1M
10M
3
2
1
VS+ = +5V
VS- = -5V
CL = 5pF
AV = +2
RL = 150
RF = 681
-2
RF = 866
-3
RF = 1.2k
RF = 1.5k
100k
1G
RF = 562
0
-1
-4
100M
RF = 412
1M
10M
100M
1G
FREQUENCY (Hz)
FREQUENCY (Hz)
FIGURE 4. FREQUENCY RESPONSE FOR VARIOUS RF
FIGURE 3. FREQUENCY RESPONSE FOR VARIOUS RF
5
3
2
RL = 150
RF = 422
RG = 422
AMPLITUDE (V)
NORMALIZED GAIN (dB)
4
1
0
-1
±VS =
-2
-3
-4
-5
100k
1M
10M
6V
5V
4V
3V
2.5V
100M
OUTPUT
2V/DIV
1V/DIV
±VS = ±5 V
AV = +2
RL = 150
1G
FREQUENCY (Hz)
FIGURE 5. FREQUENCY RESPONSE FOR VARIOUS POWER
SUPPLY VOLTAGES
FN7389 Rev 9.00
January 30, 2014
INPUT
ns
FIGURE 6. OUTPUT RISE TIME
Page 5 of 17
EL5164, EL5165, EL5364
Typical Performance Curves
0
0
VS+ = +5V
VS- = -5V
AV = +1
-20
VS+ = +5 V
VS- = -5 V
AV = +1
VOUT = 2VP-P
RL = 100
-10
-20
DISTORTION (dB)
-10
PSRR (dB)
(Continued)
-30
-40
-50
±VS
-60
-30
-40
THD
-50
-60
SECOND HARMONIC
-70
-70
THIRD HARMONIC
-80
-80
1k
10k
1M
100k
10M
-90
100M
0
10
FREQUENCY (Hz)
0
DISTORTION (dB)
-30
OUTPUT IMPEDANCE ()
VS+ = +5V
VS- = -5V
AV = +2
VOUT = 2VP-P
RL = 100
-20
-40
-50
THD
-60
-70
-80
THIRD HARMONIC
-90
-100
60
VS+ = +5V
VS- = -5V
AV = +2
10
1
0.1
0.01
SECOND HARMONIC
0
10
20
30
40
FREQUENCY (MHz)
50
10k
60
100k
1M
10M
100M
FREQUENCY (Hz)
FIGURE 9. DISTORTION vs FREQUENCY (AV = +2)
FIGURE 10. OUTPUT IMPEDANCE vs FREQUENCY
10M
±VS = ±5V
±VS =
100k
VOLTAGE NOISE (nV/Hz)
1M
ROL ()
50
FIGURE 8. DISTORTION vs FREQUENCY (AV = +1)
FIGURE 7. PSRR vs FREQUENCY
-10
20
30
40
FREQUENCY (MHz)
±6V
±5V
±4V
10k
±3V
±2.5V
1k
10
1
0.1
100
10k
100k
1M
10M
100M
FREQUENCY (Hz)
FIGURE 11. OPEN LOOP TRANSIMPEDANCE GAIN (ROL) vs
FREQUENCY FOR VARIOUS SUPPLY VOLTAGES
FN7389 Rev 9.00
January 30, 2014
100
1k
10k
100k
1M
FREQUENCY (Hz)
FIGURE 12. VOLTAGE NOISE vs FREQUENCY
Page 6 of 17
EL5164, EL5165, EL5364
Typical Performance Curves
(Continued)
VS+ = +5V, VS- = -5V
AV = +2
RL = 150
CURRENT NOISE (pA/Hz)
VS+ = +5V
VS- = -5V
100
CH1
10
CH2
1
100
1k
10k
100k
FREQUENCY (Hz)
FIGURE 14. TURN-ON DELAY, VIN = 100mVP-P
CH1
VS+ = +5V
VS- = -5V
AV = +2
RL = 150
CH2
DIFFERENTIAL GAIN (%)
0.003
PHASE
0.002
0.002
0.001
0.001
0.000
0
GAIN
-0.001
-0.001
-0.002
-0.002
-0.003
-0.003
VS+ = +5V, VS- = -5V
AV = +2
TEST FREQUENCY, 3.58MHz
1V
-0.004
DIFFERENTIAL PHASE (°)
FIGURE 13. CURRENT NOISE vs FREQUENCY
-0.005
0
-1V
DC INPUT
FIGURE 15. TURN-OFF DELAY, VIN = 100mVP-P
FIGURE 16. DIFFERENTIAL GAIN/PHASE vs DC INPUT VOLTAGE AT
3.58MHz
-30
3
2
1
VS+ = +5V
VS- = -5V
RL = 100
RF = 422
RG = 422
CL = 5pF
-40
-50
C
0
B
-1
A
-2
CROSSTALK (dB)
NORMALIZED GAIN (dB)
4
-60
-70
-90
-4
-120
1M
10M
100M
FREQUENCY (Hz)
FIGURE 17. FREQUENCY RESPONSE FOR VARIOUS CHANNELS
(EL5364)
FN7389 Rev 9.00
January 30, 2014
A TO B
-100
-110
100k
C TO B
-80
-3
-5
10k
VS+ = +5V
VS- = -5V
RL = 100
RF = 422
RG = 422
-130
10k
100k
1M
10M
A TO C
100M
FREQUENCY (Hz)
FIGURE 18. CROSSTALK BETWEEN CHANNELS (EL5364)
Page 7 of 17
EL5164, EL5165, EL5364
Typical Performance Curves
JEDEC JESD51-7 HIGH EFFECTIVE THERMAL
CONDUCTIVITY TEST BOARD
1.250W
1.2
1.0
0.8 909mW
0.6
SO8
JA = +110°C/W
435mW
0.4
SOT23-5/6
JA = +230°C/W
0.2
0
0
25
50
1.2
1.0
125
150
0.6
0.4
0.2
0
25
JEDEC JESD51-3 LOW EFFECTIVE THERMAL
CONDUCTIVITY TEST BOARD
1.2
POWER DISSIPATION (W)
POWER DISSIPATION (W)
0.9
0.8
0.7
SO8
625mW
0.5
JA = +160°C/W
0.4
391mW
0.3
SOT23-5/6
JA = +256°C/W
0.2
0.1
0
25
50
75 85 100
125
150
AMBIENT TEMPERATURE (°C)
FIGURE 21. PACKAGE POWER DISSIPATION vs AMBIENT
TEMPERATURE
FN7389 Rev 9.00
January 30, 2014
125
150
JEDEC JESD51-3 LOW EFFECTIVE THERMAL
CONDUCTIVITY TEST BOARD
1.0 909mW
SO
JA 16
(0
=
.
0.8
0.6
+1 15
10 0”
°C )
QS
/W
O
J
P1
6
A=
+1
58
°C
/W
633mW
0.4
0.2
0
0
75 85 100
FIGURE 20. PACKAGE POWER DISSIPATION vs AMBIENT
TEMPERATURE
FIGURE 19. PACKAGE POWER DISSIPATION vs AMBIENT
TEMPERATURE
0.6
50
AMBIENT TEMPERATURE (°C)
AMBIENT TEMPERATURE (°C)
1.0
QSOP16
JA = +112°C/W
0.8 893mW
0
75 85 100
JEDEC JESD51-7 HIGH EFFECTIVE THERMAL
CONDUCTIVITY TEST BOARD
1.4
SO16 (0.150”)
JA = +80°C/W
POWER DISSIPATION (W)
POWER DISSIPATION (W)
1.4
(Continued)
0
25
50
75 85 100
125
150
AMBIENT TEMPERATURE (°C)
FIGURE 22. PACKAGE POWER DISSIPATION vs AMBIENT
TEMPERATURE
Page 8 of 17
EL5164, EL5165, EL5364
Pin Descriptions
EL5164
(8 Ld SOIC)
EL5164
(6 Ld SOT-23)
EL5165
Pin Name
1, 5
2
4
EL5364
4
Function
6, 11
NC
Not connected
9, 12, 16
IN-
Inverting input
Equivalent Circuit
VS+
IN+
IN-
VSCIRCUIT 1
3
3
3
1, 5, 8
IN+
Non-inverting input
4
2
2
3
VS-
Negative supply
6
1
1
10, 13,
15
OUT
Output
(See circuit 1)
VS+
OUT
VSCIRCUIT 2
7
6
8
5
5
14
VS+
Positive supply
2, 4, 7
CE
Chip enable, allowing the
pin to float or applying a
low logic level enables the
corresponding amplifier.
VS+
CE
0.5M
INTERNAL 0V
VS-
CIRCUIT 3
Applications Information
Product Description
The EL5164, EL5165, and EL5364 are current-feedback operational
amplifiers that offer a wide -3dB bandwidth of 600MHz and a low
supply current of 3.5mA per amplifier. The EL5164, EL5165, and
EL5364 work with supply voltages ranging from a single 5V to 10V
and they are also capable of swinging to within 1V of either supply
on the output. Because of their current-feedback topology, the
EL5164, EL5165, and EL5364 do not have the normal gainbandwidth product associated with voltage-feedback operational
amplifiers. Instead, their -3dB bandwidth remains relatively
constant as closed-loop gain increases. This combination of high
bandwidth and low power, together with aggressive pricing makes
the EL5164, EL5165, and EL5364 ideal choices for many lowpower/high-bandwidth applications such as portable, handheld, or
battery-powered equipment. For varying bandwidth needs, consider
the EL5166 and EL5167 with 1.4GHz bandwidth and an 8.5mA
supply current, or the EL5162 and EL5163 with 500MHz bandwidth
and a 1.5mA supply current. Versions include single, dual, and triple
amp configurations with 5 Ld SOT-23, 16 Ld QSOP, and 8 Ld SOIC
or 16 Ld SOIC outlines.
FN7389 Rev 9.00
January 30, 2014
Power Supply Bypassing and Printed Circuit
Board Layout
As with any high frequency device, good printed circuit board
layout is necessary for optimum performance. Low impedance
ground plane construction is essential. Surface mount
components are recommended, but if leaded components are
used, lead lengths should be as short as possible. The power
supply pins must be well bypassed to reduce the risk of
oscillation. The combination of a 4.7µF tantalum capacitor in
parallel with a 0.01µF capacitor has been shown to work well
when placed at each supply pin.
For good AC performance, parasitic capacitance should be kept
to a minimum, especially at the inverting input. (See the
“Capacitance at the Inverting Input” on page 10). Even when
ground plane construction is used, it should be removed from the
area near the inverting input to minimize any stray capacitance
at that node. Carbon or Metal-Film resistors are acceptable with
the Metal-Film resistors giving slightly less peaking and
bandwidth because of additional series inductance. Use of
sockets, particularly for the SO package, should be avoided if
possible. Sockets add parasitic inductance and capacitance
which results in additional peaking and overshoot.
Page 9 of 17
EL5164, EL5165, EL5364
Disable/Power-Down
The EL5164 and EL5364 amplifiers can be disabled, placing
their outputs in a high impedance state. When disabled, the
amplifiers supply current reduces to