HAT2226R

HAT2226R Silicon N Channel MOS FET High Speed Power Switching REJ03G1466-0100 Rev.1.00 Jul 18, 2006 Features • Low on-resistance • Low drive current • High density mounting Outline RENESAS Package code: PRSP0008DD-D (Package name: SOP-8) 5 76 34 4 G 5678 DDDD 1, 2, 3 Source 4 Gate 5, 6, 7, 8 Drain 8 12 SSS 123 Absolute Maximum Ratings (Ta = 25°C) Item Symbol Ratings Drain to source voltage VDSS 600 Gate to source voltage VGSS ±30 Drain current ID 0.1 Note1 Drain peak current ID (pulse) 0.4 Body-drain diode reverse drain current IDR 0.1 Note1 Body-drain diode reverse drain peak current IDR (pulse) 0.4 Channel dissipation Pch Note2 1.5 Channel temperature Tch 150 Storage temperature Tstg –55 to +150 Notes: 1. PW ≤ 10 µs, duty cycle ≤ 1% 2. When using the glass epoxy board (FR4 40 x 40 x 1.6 mm), PW ≤ 10 s Unit V V A A A A W °C °C Rev.1.00 Jul 18, 2006 page 1 of 3 HAT2226R Electrical Characteristics (Ta = 25°C) Item Drain to source breakdown voltage Zero gate voltage drain current Gate to source leak current Gate to source cutoff voltage Static drain to source on state resistance Input capacitance Output capacitance Reverse transfer capacitance Turn-on delay time Rise time Turn-off delay time Fall time Total gate charge Gate to source charge Gate to drain charge Body-drain diode forward voltage Body-drain diode reverse recovery time Notes: 3. Pulse test Symbol V(BR)DSS IDSS IGSS VGS(off) RDS(on) Ciss Coss Crss td(on) tr td(off) tf Qg Qgs Qgd VDF trr Min 600 — — 3.0 — — — — — — — — — — — — — Typ — — — — 35 25 4 0.4 34 16 57 320 3.1 0.5 2.3 0.79 175 Max — 1 ±0.1 5.0 52 — — — — — — — — — — 1.35 — Unit V µA µA V Ω pF pF pF ns ns ns ns nC nC nC V ns Test conditions ID = 10 mA, VGS = 0 VDS = 600 V, VGS = 0 VGS = ±30 V, VDS = 0 VDS = 10 V, ID = 1 mA ID = 50 mA, VGS = 10 V Note3 VDS = 25 V VGS = 0 f = 1 MHz ID = 50 mA VGS = 10 V RL = 6000 Ω Rg = 10 Ω VDD = 480 V VGS = 10 V ID = 100 mA IF = 100 mA, VGS = 0 Note3 IF = 100 mA, VGS = 0 diF/dt = 100 A/µs Rev.1.00 Jul 18, 2006 page 2 of 3 HAT2226R Package Dimensions Package Name SOP-8 JEITA Package Code P-SOP8-3.95 × 4.9-1.27 RENESAS Code PRSP0008DD-D Previous Code FP-8DAV MASS[Typ.] 0.085g *1 D F 8 5 *2 E HE bp Index mark 1 Z e 4 * 3 bp xM c Terminal cross section (Ni/Pd/Au plating) NOTE) 1. DIMENSIONS "*1(Nom)" AND "*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION "*3" DOES NOT INCLUDE TRIM OFFSET. Reference Dimension in Millimeters Symbol Min L1 L D E A2 A1 A bp b1 c c1 HE e x y Z L L1 Nom Max 4.90 5.3 3.95 A 0.10 0.14 0.25 1.75 0.34 0.40 0.46 0.15 0.20 0.25 A1 y Detail F 0° 8° 5.80 6.10 6.20 1.27 0.25 0.1 0.75 0.40 0.60 1.27 1.08 Ordering Information Part Name HAT2226R-EL-E Quantity 2500 pcs Taping Shipping Container Note: For some grades, production may be terminated. Please contact the Renesas sales office to check the state of production before ordering the product. Rev.1.00 Jul 18, 2006 page 3 of 3 Sales Strategic Planning Div. Keep safety first in your circuit designs! Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan 1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials 1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party. 2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor home page (http://www.renesas.com). 4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials. 7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. 8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein. RENESAS SALES OFFICES Refer to "http://www.renesas.com/en/network" for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: (408) 382-7500, Fax: (408) 382-7501 Renesas Technology Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K. Tel: (1628) 585-100, Fax: (1628) 585-900 Renesas Technology (Shanghai) Co., Ltd. Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120 Tel: (21) 5877-1818, Fax: (21) 6887-7898 Renesas Technology Hong Kong Ltd. 7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: 2265-6688, Fax: 2730-6071 Renesas Technology Taiwan Co., Ltd. 10th Floor, No.99, Fushing North Road, Taipei, Taiwan Tel: (2) 2715-2888, Fax: (2) 2713-2999 Renesas Technology Singapore Pte. Ltd. 1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: 6213-0200, Fax: 6278-8001 Renesas Technology Korea Co., Ltd. Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea Tel: (2) 796-3115, Fax: (2) 796-2145 http://www.renesas.com Renesas Technology Malaysia Sdn. Bhd Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: 7955-9390, Fax: 7955-9510 © 2006. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon .6.0