HI5728/6INZ

NOT RECOMMENDED FOR NEW DESIGNS NO RECOMMENDED REPLACEMENT contact our Technical Support Center at 1-888-INTERSIL or www.intersil.com/tsc HI5728 DATASHEET FN4321 Rev 5.00 January 22, 2010 10-Bit, 125/60MSPS, Dual High Speed CMOS D/A Converter The HI5728 is a 10-bit, dual 125MSPS D/A converter which is implemented in an advanced CMOS process. It is designed for high speed applications where integration, bandwidth and accuracy are essential. Operating from a single +5V or +3V supply, the converter provides 20.48mA of full scale output current and includes an input data register. Low glitch energy and excellent frequency domain performance are achieved using a segmented architecture. A 60MSPS version and an 8-bit (HI5628) version are also available. Comparable single DAC solutions are the HI5760 (10-bit) and the HI5660 (8-bit). PART NUMBER PART MARKING • Throughput Rate . . . . . . . . . . . . . . . . . . . . . . . . 125MSPS • Low Power . . . . . . . . . . . . . . . 330mW at 5V, 54mW at 3V • Integral Linearity Error . . . . . . . . . . . . . . . . . . . . . 1 LSB • Differential Linearity . . . . . . . . . . . . . . . . . . . . . . 0.5 LSB • Gain Matching (Typ). . . . . . . . . . . . . . . . . . . . . . . . . . 0.5% • SFDR at 5MHz Output . . . . . . . . . . . . . . . . . . . . . . . 68dBc • Single Power Supply from +5V to +3V • CMOS Compatible Inputs Ordering Information TEMP. RANGE (°C) Features PACKAGE MAX CLOCK SPEED PKG. DWG. # (MHz) • Excellent Spurious Free Dynamic Range • Internal Voltage Reference • Dual 10-Bit D/A Converters on a Monolithic Chip • Pb-Free Available (RoHS Compliant) HI5728IN* HI5728IN -40 to +85 48 Ld LQFP Q48.7x7A 125 HI5728INZ* (Note) HI5728INZ -40 to +85 48 Ld LQFP Q48.7x7A (Pb-free) 125 HI5728/6IN HI5728/6IN -40 to +85 48 Ld LQFP Q48.7x7A 60 • Wireless Local Loop HI5728/6INZ (Note) HI5728 /6INZ -40 to +85 48 Ld LQFP Q48.7x7A (Pb-free) 60 • Direct Digital Frequency Synthesis HI5728EVAL1 +25 Evaluation Platform • Wireless Communications 125 *Add “-T” suffix for tape and reel. Please refer to TB347 for details on reel specifications. NOTE: These Intersil Pb-free plastic packaged products employ special Pb-free material sets, molding compounds/die attach materials, and 100% matte tin plate plus anneal (e3 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations). Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020. FN4321 Rev 5.00 January 22, 2010 Applications • Signal Reconstruction • Arbitrary Waveform Generators • Test Equipment/Instrumentation • High Resolution Imaging Systems Page 1 of 19 HI5728 Pinout FN4321 Rev 5.00 January 22, 2010 QD7 DVDD QD9 (MSB) QD8 QCLK DGND ICLK ID9 (MSB) DVDD DGND REFIO QD6 QD5 QD4 QD3 QD2 QD1 QD0 (LSB) DVDD DGND NC AVDD AGND QCOMP1 QOUTA FSADJ AGND QOUTB AGND IOUTB IOUTA REFLO AGND SLEEP DVDD DGND NC AVDD 48 47 46 45 44 43 42 41 40 39 38 37 36 35 2 34 3 33 4 32 5 31 6 30 7 29 8 28 9 27 10 26 11 25 12 13 14 15 16 17 18 19 20 21 22 23 24 1 ICOMP1 ID6 ID5 ID4 ID3 ID2 ID1 ID0 (LSB) ID8 ID7 HI5728 (48 LD LQFP) TOP VIEW Page 2 of 19 HI5728 Functional Block Diagram IOUTA IOUTB (LSB) ID0 CASCODE CURRENT SOURCE ID1 ID2 ID3 ID4 LATCH LATCH 36 SWITCH MATRIX 36 5 LSBs + 31 MSB SEGMENTS ID5 ID6 UPPER 5-BIT ID7 31 DECODER ID8 (MSB) ID9 ICLK ICOMP1 INT/EXT VOLTAGE REFERENCE INT/EXT REFERENCE SELECT BIAS GENERATION REFLO REFIO FSADJ SLEEP QCOMP1 (LSB) QD0 CASCODE CURRENT SOURCE QD1 QD2 QD3 QD4 LATCH LATCH 36 SWITCH MATRIX QD5 36 5 LSBs + 31 MSB SEGMENTS QD6 UPPER 5-BIT QD7 31 DECODER QD8 QCLK AVDD FN4321 Rev 5.00 January 22, 2010 AGND DVDD DGND QOUTA QOUTB Page 3 of 19 HI5728 Typical Applications Circuit ICLK/QCLK DIGITAL GROUND PLANE 50 DVDD DVDD 0.1µF QD9 (MSB) QD8 QD7 ID7 ID8 ID9 (MSB) 48 47 46 45 44 43 42 41 40 39 38 37 36 1 35 2 34 3 33 4 32 5 31 6 30 7 DVDD 29 8 DGND 28 9 DVDD NC (GROUND) 27 10 DGND AVDD 26 11 NC (GROUND) 25 12 13 14 15 16 17 18 19 20 21 22 23 24 ID6 ID5 ID4 ID3 ID2 ID1 ID0 (LSB) SLEEP ANALOG GROUND PLANE 0.1µF DVDD 0.1µF AGND DVDD QD6 QD5 QD4 QD3 QD2 QD1 QD0 (LSB) 0.1µF AVDD 0.1µF AGND AVDD 0.1µF AGND QCOMP1 REFIO ICOMP1 AVDD RSET 2k 0.1µF +5V OR +3V SUPPLY + 10µF FN4321 Rev 5.00 January 22, 2010 IOUTB QOUTB 0.1µF NOTE: ICOMP1 AND QCOMP1 PINS (24, 14) MUST BE TIED TOGETHER EXTERNALLY QOUTA FERRITE BEAD 10µH AVDD 50 50 50 50 IOUTA 0.1µF 0.1µF FERRITE BEAD DVDD (POWER PLANE) AVDD (POWER PLANE) 10µH 0.1µF +5V OR +3V SUPPLY + 10µF Page 4 of 19 HI5728 Pin Descriptions PIN NO. 39, 38, 37, 36, 35, 34, 33, 32, 31, 30 PIN NAME PIN DESCRIPTION QD9 (MSB) Through Digital Data Bit 9, the Most Significant Bit through Digital Data Bit 0, the Least Significant Bit, of the Q QD0 (LSB) channel. 1, 2, 3, 4, 5, 6, 7, 46, 47, 48 ID9 (MSB) Through ID0 (LSB) 8 SLEEP Control Pin for Power-Down mode. Sleep Mode is active high; Connect to ground for Normal Mode. Sleep pin has internal 20µA active pull-down current. 15 REFLO Connect to analog ground to enable internal 1.2V reference or connect to AVDD to disable. 23 REFIO Reference voltage input if internal reference is disabled and reference voltage output if internal reference is enabled. Use 0.1µF cap to ground when internal reference is enabled. 22 FSADJ Full Scale Current Adjust. Use a resistor to ground to adjust full scale output current. Full Scale Output Current Per Channel = 32 x IFSADJ . 14, 24 ICOMP1, QCOMP1 Reduces noise. Connect each to AVDD with 0.1µF capacitor near each pin. The ICOMP1 and QCOMP1 pins MUST be tied together externally. 13, 18, 19, 25 AGND Analog Ground Connections. 17 IOUTB The complimentary current output of the I channel. Bits set to all 0s gives full scale current. 16 IOUTA Current output of the I channel. Bits set to all 1s gives full scale current. 20 QOUTB The complimentary current output of the Q channel. Bits set to all 0s gives full scale current. 21 QOUTA Current output of the Q channel. Bits set to all 1s gives full scale current. 11, 27 NC 12, 26 AVDD Analog Supply (+2.7V to +5.5V). 10, 28, 41, 44 DGND Digital Ground. 9, 29, 40, 45 DVDD Supply voltage for digital circuitry (+2.7V to +5.5V). 43 ICLK Clock input for I channel. Positive edge of clock latches data. 42 QCLK Clock input for Q channel. Positive edge of clock latches data. FN4321 Rev 5.00 January 22, 2010 Digital Data Bit 9, the Most Significant Bit through Digital Data Bit 0, the Least Significant Bit, of the I channel. No Connect. Recommended: connect to ground. Page 5 of 19 HI5728 Absolute Maximum Ratings Thermal Information Digital Supply Voltage DVDD to DCOM . . . . . . . . . . . . . . . . . +5.5V Analog Supply Voltage AVDD to ACOM. . . . . . . . . . . . . . . . . . +5.5V Grounds, ACOM TO DCOM . . . . . . . . . . . . . . . . . . . -0.3V to +0.3V Digital Input Voltages (D9-D0, CLK, SLEEP). . . . . . . . . DVDD +0.3V Internal Reference Output Current. . . . . . . . . . . . . . . . . . . . . 50µA Reference Input Voltage Range. . . . . . . . . . . . . . . . . . AVDD +0.3V Analog Output Current (IOUT) . . . . . . . . . . . . . . . . . . . . . . . . . 24mA Thermal Resistance (Typical, Note 1) Operating Conditions JA(°C/W) 48 Ld TQFP Package. . . . . . . . . . . . . . . . . . . . . . . . 55 Maximum Power Dissipation 48 Ld TQFP Package. . . . . . . . . . . . . . . . . . . . . . . . . . . . .930mW Maximum Junction Temperature . . . . . . . . . . . . . . . . . . . . . . +150°C Maximum Storage Temperature Range . . . . . . . . . -65°C to +150°C Pb-Free Reflow Profile. . . . . . . . . . . . . . . . . . . . . . . . .see link below http://www.intersil.com/pbfree/Pb-FreeReflow.asp Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . -40°C to +85°C CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product reliability and result in failures not covered by warranty. NOTE: 1. JA is measured with the component mounted on a high effective thermal conductivity test board in free air. See Tech Brief TB379 for details. Electrical Specifications AVDD = DVDD = +5V, VREF = Internal 1.2V, IOUTFS = 20mA, TA = +25°C for All Typical Values. Data given is per channel except for “POWER SUPPLY CHARACTERISTICS” on page 8 HI5728IN TA = -40°C TO +85°C PARAMETER TEST CONDITIONS MIN (Note 11) TYP MAX (Note 11) UNITS 10 - - Bits SYSTEM PERFORMANCE (Per Channel) Resolution Integral Linearity Error, INL “Best Fit” Straight Line (Note 7) -1 0.5 +1 LSB Differential Linearity Error, DNL (Note 7) -0.5 0.25 +0.5 LSB Offset Error, IOS (Note 7) -0.025 +0.025 % FSR Offset Drift Coefficient (Note 7) - 0.1 - ppm FSR/°C Full Scale Gain Error, FSE With External Reference (Notes 2, 7) -10 2 +10 % FSR With Internal Reference (Notes 2, 7) -10 1 +10 % FSR - 50 - ppm FSR/°C Full Scale Gain Drift With External Reference (Note 7) With Internal Reference (Note 7) Gain Matching Between Channels I/Q Channel Isolation FOUT = 10MHz Output Voltage Compliance Range (Note 3) Full Scale Output Current, IFS - 100 - ppm FSR/°C -0.5 0.1 0.5 dB - 80 - dB -0.3 - 1.25 V 2 - 20 mA DYNAMIC CHARACTERISTICS (Per Channel) Maximum Clock Rate, fCLK (Note 3) 125 - - MHz Output Settling Time, (tSETT) 0.1% (1 LSB, equivalent to 9 Bits) (Note 7) - 20 - ns 0.05% (1/2 LSB, equivalent to 10 Bits) (Note 7) - 35 - ns Singlet Glitch Area (Peak Glitch) RL = 25(Note 7) - 35 - pV•s Output Rise Time Full Scale Step - 1.5 - ns Output Fall Time Full Scale Step - 1.5 - ns - 10 - pF IOUTFS = 20mA - 50 - pA/Hz IOUTFS = 2mA - 30 - pA/Hz Output Capacitance Output Noise FN4321 Rev 5.00 January 22, 2010 Page 6 of 19 HI5728 Electrical Specifications AVDD = DVDD = +5V, VREF = Internal 1.2V, IOUTFS = 20mA, TA = +25°C for All Typical Values. Data given is per channel except for “POWER SUPPLY CHARACTERISTICS” on page 8 (Continued) HI5728IN TA = -40°C TO +85°C PARAMETER TEST CONDITIONS MIN (Note 11) TYP MAX (Note 11) UNITS - 75 - dBc AC CHARACTERISTICS (Per Channel) - HI5728IN - 125MHz Spurious Free Dynamic Range, SFDR Within a Window Total Harmonic Distortion (THD) to Nyquist Spurious Free Dynamic Range, SFDR to Nyquist fCLK = 125MSPS, fOUT = 32.9MHz, 10MHz Span (Notes 4, 7) fCLK = 100MSPS, fOUT = 5.04MHz, 4MHz Span (Notes 4, 7) - 76 - dBc fCLK = 60MSPS, fOUT = 10.1MHz, 10MHz Span (Notes 4, 7) - 75 - dBc fCLK = 50MSPS, fOUT = 5.02MHz, 2MHz Span (Notes 4, 7) - 76 - dBc fCLK = 50MSPS, fOUT = 1.00MHz, 2MHz Span (Notes 4, 7) - 78 - dBc dBc fCLK = 100MSPS, fOUT = 2.00MHz (Notes 4, 7) - 71 - fCLK = 50MSPS, fOUT = 2.00MHz (Notes 4, 7) - 71 - dBc fCLK = 50MSPS, fOUT = 1.00MHz (Notes 4, 7) - 76 - dBc fCLK = 125MSPS, fOUT = 32.9MHz, 62.5MHz Span (Notes 4, 7) - 54 - dBc fCLK = 125MSPS, fOUT = 10.1MHz, 62.5MHz Span (Notes 4, 7) - 64 - dBc fCLK = 100MSPS, fOUT = 40.4MHz, 50MHz Span (Notes 4, 7) - 52 - dBc fCLK = 100MSPS, fOUT = 20.2MHz, 50MHz Span (Notes 4, 7) - 60 - dBc fCLK = 100MSPS, fOUT = 5.04MHz, 50MHz Span (Notes 4, 7) - 68 - dBc fCLK = 100MSPS, fOUT = 2.51MHz, 50MHz Span (Notes 4, 7) - 74 - dBc fCLK = 60MSPS, fOUT = 10.1MHz, 30MHz Span (Notes 4, 7) - 63 - dBc fCLK = 50MSPS, fOUT = 20.2MHz, 25MHz Span (Notes 4, 7) - 55 - dBc fCLK = 50MSPS, fOUT = 5.02MHz, 25MHz Span (Notes 4, 7) - 68 - dBc fCLK = 50MSPS, fOUT = 2.51MHz, 25MHz Span (Notes 4, 7) - 73 - dBc fCLK = 50MSPS, fOUT = 1.00MHz, 25MHz Span (Notes 4, 7) - 73 - dBc fCLK = 60MSPS, fOUT = 10.1MHz, 10MHz Span (Notes 4, 7) - 75 - dBc fCLK = 50MSPS, fOUT = 5.02MHz, 2MHz Span (Notes 4, 7) - 76 - dBc fCLK = 50MSPS, fOUT = 1.00MHz, 2MHz Span (Notes 4, 7) - 78 - dBc AC CHARACTERISTICS (Per Channel) - HI5728/6IN - 60MHz Spurious Free Dynamic Range, SFDR Within a Window Total Harmonic Distortion (THD) to Nyquist Spurious Free Dynamic Range, SFDR to Nyquist fCLK = 50MSPS, fOUT = 2.00MHz (Notes 4, 7) - 71 - dBc fCLK = 50MSPS, fOUT = 1.00MHz (Notes 4, 7) - 76 - dBc fCLK = 60MSPS, fOUT = 20.2MHz, 30MHz Span (Notes 4, 7) - 56 - dBc fCLK = 60MSPS, fOUT = 10.1MHz, 30MHz Span (Notes 4, 7) - 63 - dBc fCLK = 50MSPS, fOUT = 20.2MHz, 25MHz Span (Notes 4, 7) - 55 - dBc fCLK = 50MSPS, fOUT = 5.02MHz, 25MHz Span (Notes 4, 7) - 68 - dBc fCLK = 50MSPS, fOUT = 2.51MHz, 25MHz Span (Notes 4, 7) - 73 - dBc fCLK = 50MSPS, fOUT = 1.00MHz, 25MHz Span (Notes 4, 7) - 73 - dBc fCLK = 25MSPS, fOUT = 5.02MHz, 25MHz Span (Notes 4, 7) - 71 - dBc 1.04 1.16 1.28 V Internal Reference Voltage Drift - 60 - ppm/°C Internal Reference Output Current Sink/Source Capability - 0.1 - µA VOLTAGE REFERENCE Internal Reference Voltage, VFSADJ Voltage at Pin 22 with Internal Reference Reference Input Impedance Reference Input Multiplying Bandwidth DIGITAL INPUTS (Note 7) - 1 - M - 1.4 - MHz 3.5 5 - V D9-D0, CLK (Per Channel) Input Logic High Voltage with 5V Supply, VIH FN4321 Rev 5.00 January 22, 2010 (Note 3) Page 7 of 19 HI5728 Electrical Specifications AVDD = DVDD = +5V, VREF = Internal 1.2V, IOUTFS = 20mA, TA = +25°C for All Typical Values. Data given is per channel except for “POWER SUPPLY CHARACTERISTICS” on page 8 (Continued) HI5728IN TA = -40°C TO +85°C PARAMETER TEST CONDITIONS MIN (Note 11) TYP MAX (Note 11) UNITS Input Logic High Voltage with 3V Supply, VIH (Note 3) 2.1 3 - V Input Logic Low Voltage with 5V Supply, VIL (Note 3) - 0 1.3 V Input Logic Low Voltage with 3V Supply, VIL (Note 3) - 0 0.9 V Input Logic Current, IIH -10 - +10 µA Input Logic Current, IIL -10 - +10 µA - 5 - pF - - ns Digital Input Capacitance, CIN TIMING CHARACTERISTICS (Per Channel) Data Setup Time, tSU See Figure 41 (Note 3) 3 Data Hold Time, tHLD See Figure 41 (Note 3) 3 - - ns Propagation Delay Time, tPD See Figure 41 - 1 - ns CLK Pulse Width, tPW1 , tPW2 See Figure 41 (Note 3) 4 - - ns POWER SUPPLY CHARACTERISTICS AVDD Power Supply (Notes 8, 9) 2.7 5.0 5.5 V DVDD Power Supply (Notes 8, 9) 2.7 5.0 5.5 V Analog Supply Current (IAVDD) (5V or 3V, IOUTFS = 20mA) - 46 60 mA (5V or 3V, IOUTFS = 2mA) - 8 - mA mA Digital Supply Current (IDVDD) (5V, IOUTFS = Don’t Care) (Note 5) - 6 10 (3V, IOUTFS = Don’t Care) (Note 5) - 3 - mA Supply Current (IAVDD) Sleep Mode (5V or 3V, IOUTFS = Don’t Care) - 3.2 6 mA Power Dissipation (5V, IOUTFS = 20mA) (Note 6) - 330 - mW (5V, IOUTFS = 2mA) (Note 6) - 140 - mW (3V, IOUTFS = 20mA) (Note 6) - 170 - mW (3V, IOUTFS = 2mA) (Note 6) - 54 - mW (5V, IOUTFS = 20mA) (Note 10) - 300 - mW (3.3V, IOUTFS = 20mA) (Note 10) - 150 - mW - 135 - mW -0.2 - +0.2 % FSR/V (3V, IOUTFS = 20mA) (Note 10) Power Supply Rejection Single Supply (Note 7) NOTES: 2. Gain Error measured as the error in the ratio between the full scale output current and the current through RSET (typically 625A). Ideally the ratio should be 32. 3. Limits established by characterization and are not production tested. 4. Spectral measurements made with differential coupled transformer and 100% amplitude. 5. Measured with the clock at 50MSPS and the output frequency at 1MHz, both channels. 6. Measured with the clock at 100MSPS and the output frequency at 40MHz, both channels. 7. See “Definition of Specifications” on page 16. 8. For operation below 3V, it is recommended that the output current be reduced to 12mA or less to maintain optimum performance. DVDD and AVDD do not have to be equal. 9. For operation above 125MHz, it is recommended that the power supply be 3.3V or greater. The part is functional with the clock above 125MSPS and the power supply below 3.3V, but performance is degraded. 10. Measured with the clock at 60MSPS and the output frequency at 10MHz, both channels. 11. Parameters with MIN and/or MAX limits are 100% tested at +25°C, unless otherwise specified. Temperature limits established by characterization and are not production tested. FN4321 Rev 5.00 January 22, 2010 Page 8 of 19 HI5728 Typical Performance Curves, 5V Power Supply 80 76 74 75 -6dBFS 72 -6dBFS SFDR (dBc) SFDR (dBc) 70 0dBFS 65 60 70 -12dBFS 68 66 64 -12dBFS 55 0dBFS 62 60 50 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 1 2 2 3 4 5 6 7 8 9 10 40 45 OUTPUT FREQUENCY (MHz) OUTPUT FREQUENCY (MHz) FIGURE 1. SFDR vs fOUT, CLOCK = 5MSPS FIGURE 2. SFDR vs fOUT, CLOCK = 25MSPS 80 75 0dBFS SFDR (dBc) SFDR (dBc) -6dBFS 70 65 -12dBFS 65 -12dBFS 60 55 60 55 -6dBFS 70 75 0dBFS 50 0 2 4 6 8 10 12 14 16 18 45 20 0 5 10 15 20 25 30 35 OUTPUT FREQUENCY (MHz) OUTPUT FREQUENCY (MHz) FIGURE 3. SFDR vs fOUT, CLOCK = 50MSPS FIGURE 4. SFDR vs fOUT, CLOCK = 100MSPS 75 80 70 75 25MSPS 6dBFS -12dBFS 60 SFDR (dBc) 65 SFDR (dBc) 50MSPS 70 55 100MSPS 65 125MSPS 60 55 0dBFS 50 50 45 0 5 10 15 20 25 30 35 40 45 OUTPUT FREQUENCY (MHz) FIGURE 5. SFDR vs fOUT, CLOCK = 125MSPS FN4321 Rev 5.00 January 22, 2010 50 45 -25 -20 -15 -10 -5 AMPLITUDE (dBFS) FIGURE 6. SFDR vs AMPLITUDE, fCLK / fOUT = 10 Page 9 of 19 0 HI5728 Typical Performance Curves, 5V Power Supply (Continued) 75 80 25MSPS 75 50MSPS 65 65 SFDR (dBc) SFDR (dBc) 70 100MSPS 60 125MSPS 55 60 125MSPS (16.9/18.1MHz) 45 40 -25 -20 -15 -10 -5 40 -25 0 AMPLITUDE (dBFS) -20 -15 -10 -5 0 AMPLITUDE (TOTAL PEAK POWER OF COMBINED TONES) (dBFS) FIGURE 7. SFDR vs AMPLITUDE, fCLK / fOUT = 5 FIGURE 8. SFDR vs AMPLITUDE OF TWO TONES, fCLK / fOUT = 7 75 75 2.5MHz 70 70 -6dBFS DIFF 10MHz 65 0dBFS DIFF 65 60 SFDR (dBc) SFDR (dBc) 100MSPS (13.5/14.5MHz) 50 45 20MHz 55 40MHz 50 60 55 -6dBFS SINGLE 50 45 0dBFS SINGLE 2 4 6 8 10 12 IOUT (mA) 14 16 18 45 20 10 15 20 25 30 35 40 -10 -10 2.5MHz -20 -20 -30 -30 70 10.1MHz -40 -40 AMP(dB) (dB) Amp 65 60 55 -50 -50 fCLK = 100MSPS = f100MSPS =9.95MHz Fout = OUT 9.95MHz AMPLITUDE = 0dBFS Amplitude = 0dBFS SFDR = 64dBc SFDR = 64dBc 14dB 14dB EXTERNAL ATTENUATION ExternalANALYZER Analyzer Attenuation -60 -60 -70 -70 -80 -80 50 -90 -90 40.4MHz 45 40 -40 5 FIGURE 10. DIFFERENTIAL vs SINGLE-ENDED, CLOCK = 100MSPS 80 75 0 OUTPUT FREQUENCY (MHz) FIGURE 9. SFDR vs IOUT, CLOCK = 100MSPS SFDR (dBc) 50MSPS (6.75/7.25MHz) 55 50 40 25MSPS (3.38/3.63MHz) 70 -20 0 20 40 60 -100 -100 80 TEMPERATURE (°C) FIGURE 11. SFDR vs TEMPERATURE, CLOCK = 100MSPS FN4321 Rev 5.00 January 22, 2010 -110 -110 00 5MHz/DIV. 5MHz/DIV. Frequency (MHz) FREQUENCY (MHz) FIGURE 12. SINGLE TONE SFDR Page 10 of 19 50 HI5728 Typical Performance Curves, 5V Power Supply (Continued) -10 -20 -20 Fclk = 100MSPS fCLK = 100MSPS Fout = 13.5/14.5MHz = 13.5/14.5MHZ fOUT Combined PeakCOMBINED Amplitude =PEAK 0dBFS MTPR==0dBFS 62.9dBc AMPLITUDE 14dB External Analyzer Attenuation SFDR = 62.9dBc 14dB EXTERNAL ANALYZER ATTENUATION -40 -40 AMP(dB) (dB) Amp -50 -50 -60 -60 -30 -40 -70 -70 -80 -80 -50 -60 -70 -90 -90 -80 -100 -100 -110 -110 -90 00 5MHz/DIV. 5MHz/DIV. Frequency (MHz) FREQUENCY (MHz) 50 -100 0.5 FIGURE 13. TWO TONE, CLOCK = 100MSPS -10 fCLK = 100MSPS fOUT = 2.6, 3.2, 3.8, 4.4, 5.6, 6.2, 6.8MHZ COMBINED PEAK AMPLITUDE = 0dBFS SFDR = 67dBc (IN A WINDOW) -30 -40 -30 -40 -60 -70 -50 -60 -80 -70 -90 -80 -100 -90 -110 0.5 1.95MHz/DIV. FREQUENCY (MHz) fCLK = 50MSPS fOUT = 1.9, 2.2, 2.8, 3.1MHZ COMBINED PEAK AMPLITUDE = 0dBFS SFDR = 73.6dBc (IN A WINDOW) -20 AMP (dB) -50 AMP (dB) 15 1.45MHz / DIV. FIGURE 14. FOUR-TONE, CLOCK = 100MSPS -20 -100 0.5 20 950kHz/DIV. 10 FREQUENCY (MHz) FIGURE 15. EIGHT-TONE, CLOCK = 100MSPS FIGURE 16. FOUR-TONE, CLOCK = 50MSPS 0.4 0.4 0.2 0.2 LSB LSB fCLK = 100MSPS fOUT = 3.8, 4.4, 5.6, 6.2MHz COMBINED PEAK AMPLITUDE = 0dBFS SFDR = 71.4dBc (IN A WINDOW) -20 AMP (dB) -30 -30 0 0 -0.2 -0.2 -0.4 -0.4 0 200 400 600 800 CODE FIGURE 17. DIFFERENTIAL NONLINEARITY FN4321 Rev 5.00 January 22, 2010 1000 0 200 400 600 800 1000 CODE FIGURE 18. INTEGRAL NONLINEARITY Page 11 of 19 HI5728 Typical Performance Curves, 5V Power Supply (Continued) 320 310 300 POWER (mW) 290 280 270 260 250 240 230 220 210 0 20 40 60 80 100 120 CLOCK RATE (MSPS) FIGURE 19. POWER vs CLOCK RATE, fCLK / fOUT = 10, IOUT = 20mA Typical Performance Curves, 3V Power Supply 80 80 0dBFS -6dBFS 75 -6dBFS 70 0dBFS SFDR (dBc) SFDR (dBc) 75 65 60 70 -12dBFS 65 -12dBFS 55 60 50 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 1 2 2 3 OUTPUT FREQUENCY (MHz) 4 5 6 7 8 9 10 OUTPUT FREQUENCY (MHz) FIGURE 20. SFDR vs fOUT, CLOCK = 5MSPS FIGURE 21. SFDR vs fOUT, CLOCK = 25MSPS 80 80 75 75 0dBFS SFDR (dBc) SFDR (dBc) 70 -6dBFS 70 -12dBFS 65 60 0dBFS 65 -12dBFS 60 55 55 50 -6dBFS 50 0 2 4 6 8 10 12 14 16 18 OUTPUT FREQUENCY (MHz) FIGURE 22. SFDR vs fOUT, CLOCK = 50MSPS FN4321 Rev 5.00 January 22, 2010 20 45 0 5 10 15 20 25 30 35 40 OUTPUT FREQUENCY (MHz) FIGURE 23. SFDR vs fOUT, CLOCK = 100MSPS Page 12 of 19 45 HI5728 Typical Performance Curves, 3V Power Supply (Continued) 80 80 75 75 70 70 65 SFDR (dBc) SFDR (dBc) 0dBFS -6dBFS 60 -12dBFS 100MSPS 125MSPS 60 55 50 50 0 5 10 15 20 25 30 35 40 45 50MSPS 65 55 45 25MSPS 45 -25 50 -20 -15 FIGURE 24. SFDR vs fOUT, CLOCK = 125MSPS -5 0 FIGURE 25. SFDR vs AMPLITUDE, fCLK / fOUT = 10 75 80 25MSPS 70 75 70 25MSPS (3.38/3.63MHz) 65 50MSPS 65 60 100MSPS 5MSPS 55 50 2 SFDR (dBc) SFDR (dBc) -10 AMPLITUDE (dBFS) OUTPUT FREQUENCY (MHz) ND 5A 50 PS MS 125MSPS 60 50MSPS (6.75/7.25MHz) 55 100MSPS (13.5/14.5MHz) 50 125MSPS (16.9/18.1MHz) 45 45 40 -25 -20 -15 -10 -5 40 -25 0 -20 -15 AMPLITUDE (dBFS) -10 -5 0 AMPLITUDE (dBFS) FIGURE 26. SFDR vs AMPLITUDE, fCLK / fOUT = 5 FIGURE 27. SFDR vs AMPLITUDE OF TWO TONES, fCLK/fOUT = 7 80 80 75 75 70 70 65 10MHz 60 20MHz SFDR (dBc) SFDR (dBc) 2.5MHz 0dBFS DIFF 65 -6dBFS SINGLE 60 -6dBFS DIFF 55 55 40MHz 50 50 0dBFS SINGLE 45 2 4 6 8 10 12 14 16 18 IOUT (mA) FIGURE 28. SFDR vs IOUT, CLOCK = 100MSPS FN4321 Rev 5.00 January 22, 2010 20 45 0 5 10 15 20 25 30 35 OUTPUT FREQUENCY (MHz) FIGURE 29. DIFFERENTIAL vs SINGLE-ENDED, CLOCK = 100MSPS Page 13 of 19 40 HI5728 Typical Performance Curves, 3V Power Supply (Continued) 80 -10 -30 70 10.1MHz -40 65 AMP (dB) SFDR (dBc) fCLK = 100MSPS fOUT = 9.95MHz AMPLITUDE = 0dBFS SFDR = 63dBc 14dB EXTERNAL ANALYZER ATTENUATION -20 2.5MHz 75 60 55 -50 -60 -70 -80 50 40.4MHz -90 45 -100 40 -40 -20 0 20 40 60 -110 80 0 5MHz/DIV. TEMPERATURE (oC) FIGURE 30. SFDR vs TEMPERATURE, CLOCK = 100MSPS FIGURE 31. SINGLE TONE SFDR -10 -20 fCLK = 100MSPS fOUT = 13.5/14.5MHz COMBINED PEAK AMPLITUDE = 0dBFS SFDR = 61.5dBc 14dB EXTERNAL ANALYZER ATTENUATION -40 AMP (dB) -50 -60 -30 -40 -70 -50 -60 -80 -70 -90 -80 -100 -90 0 5MHz/DIV. fCLK = 100MSPS fOUT = 3.8, 4.4, 5.6, 6.2MHz COMBINED PEAK AMPLITUDE = 0dBFS SFDR = 70.6dBc (IN A WINDOW) -20 AMP (dB) -30 -110 -100 0.5 50 FREQUENCY (MHz) 1.45MHz/DIV. 15 FREQUENCY (MHz) FIGURE 32. TWO-TONE, CLOCK = 100MSPS FIGURE 33. FOUR-TONE, CLOCK = 100MSPS -20 -10 fCLK = 100MSPS fOUT = 2.6, 3.2, 3.8, 4.4, 5.6, 6.2, 6.8MHz COMBINED PEAK AMPLITUDE = 0dBFS SFDR = 67.4dBc (IN A WINDOW) -40 -50 -60 -30 -40 -70 -50 -60 -80 -70 -90 -80 -100 -90 -110 0.5 1.95MHz/DIV. FREQUENCY (MHz) FIGURE 34. EIGHT-TONE, CLOCK = 100MSPS FN4321 Rev 5.00 January 22, 2010 fCLK = 50MSPS fOUT = 1.9, 2.2, 2.8, 3.1MHz COMBINED PEAK AMPLITUDE = 0dBFS SFDR = 74.2dBc (IN A WINDOW) -20 AMP (dB) -30 AMP (dB) 50 FREQUENCY (MHz) 20 -100 0 950kHz/DIV. FREQUENCY (MHz) FIGURE 35. FOUR-TONE, CLOCK = 50MSPS Page 14 of 19 10 HI5728 (Continued) 0.4 0.4 0.2 0.2 LSB LSB Typical Performance Curves, 3V Power Supply 0 0 -0.2 -0.2 -0.4 -0.4 0 200 400 600 800 1000 0 200 400 CODE 600 800 1000 CODE FIGURE 36. DIFFERENTIAL NONLINEARITY FIGURE 37. INTEGRAL NONLINEARITY 152 148 POWER (mW) 144 140 136 132 128 124 120 0 20 40 60 80 100 120 CLOCK RATE (MSPS) FIGURE 38. POWER vs CLOCK RATE, fCLK / fOUT = 10, IOUT = 20mA FN4321 Rev 5.00 January 22, 2010 Page 15 of 19 HI5728 Timing Diagrams 50% CLK D9-D0 GLITCH AREA = 1/2 (H x W) V HEIGHT (H) 1 LSB ERROR BAND IOUT t(ps) WIDTH (W) tSETT tPD FIGURE 40. PEAK GLITCH AREA (SINGLET) MEASUREMENT METHOD FIGURE 39. OUTPUT SETTLING TIME DIAGRAM tPW1 tPW2 50% CLK tSU tSU tHLD tSU tHLD tHLD D9-D0 tPD tSETT IOUT tPD tSETT tPD tSETT FIGURE 41. PROPAGATION DELAY, SETUP TIME, HOLD TIME AND MINIMUM PULSE WIDTH DIAGRAM Definition of Specifications Integral Linearity Error, INL, is the measure of the worst case point that deviates from a best fit straight line of data values along the transfer curve. Differential Linearity Error, DNL, is the measure of the step size output deviation from code to code. Ideally the step size should be 1 LSB. A DNL specification of 1 LSB or less guarantees monotonicity. Output Settling Time, is the time required for the output voltage to settle to within a specified error band measured from the beginning of the output transition. The FN4321 Rev 5.00 January 22, 2010 measurement was done by switching from code 0 to 256, or quarter scale. Termination impedance was 25 due to the parallel resistance of the output 50 and the oscilloscope’s 50 input. This also aids the ability to resolve the specified error band without overdriving the oscilloscope. Singlet Glitch Area, is the switching transient appearing on the output during a code transition. It is measured as the area under the overshoot portion of the curve and is expressed as a Volt-Time specification. This is tested under the same conditions as “Output Settling Time, (tSETT)” on page 6 Page 16 of 19 HI5728 Full Scale Gain Error, is the error from an ideal ratio of 32 between the output current and the full scale adjust current (through RSET). Full Scale Gain Drift, is measured by setting the data inputs to all ones and measuring the output voltage through a known resistance as the temperature is varied from TMIN to TMAX. It is defined as the maximum deviation from the value measured at room temperature to the value measured at either TMIN or TMAX. The units are ppm of FSR (full scale range) per °C. Total Harmonic Distortion, THD, is the ratio of the DAC output fundamental to the RMS sum of the first five harmonics. Spurious Free Dynamic Range, SFDR, is the amplitude difference from the fundamental to the largest harmonically or non-harmonically related spur within the specified window. Output Voltage Compliance Range, is the voltage limit imposed on the output. The output impedance load should be chosen such that the voltage developed does not violate the compliance range. Offset Error, is measured by setting the data inputs to all zeros and measuring the output voltage through a known resistance. Offset error is defined as the maximum deviation of the output current from a value of 0mA. Offset Drift, is measured by setting the data inputs to all zeros and measuring the output voltage through a known resistance as the temperature is varied from TMIN to TMAX. It is defined as the maximum deviation from the value measured at room temperature to the value measured at either TMIN or TMAX. The units are ppm of FSR (Full Scale Range) per °C. Power Supply Rejection, is measured using a single power supply. Its nominal +5V is varied 10% and the change in the DAC full scale output is noted. Reference Input Multiplying Bandwidth, is defined as the 3dB bandwidth of the voltage reference input. It is measured by using a sinusoidal waveform as the external reference with the digital inputs set to all 1s. The frequency is increased until the amplitude of the output waveform is 0.707 of its original value. Internal Reference Voltage Drift, is defined as the maximum deviation from the value measured at room temperature to the value measured at either TMIN or TMAX . The units are ppm per °C. Detailed Description The HI5728 is a dual, 10-bit, current out, CMOS, digital to analog converter. Its maximum update rate is 125MSPS and can be powered by either single or dual power supplies in the recommended range of +3V to +5V. It consumes less than 330mW of power when using a +5V supply with the data switching at 100MSPS. The architecture is based on a segmented current source arrangement that reduces glitch by reducing the amount of current switching at any one time. FN4321 Rev 5.00 January 22, 2010 The five MSBs are represented by 31 major current sources of equivalent current. The five LSBs are comprised of binary weighted current sources. Consider an input waveform to the converter which is ramped through all the codes from 0 to 1023. The five LSB current sources would begin to count up. When they reached the all high state (decimal value of 31) and needed to count to the next code, they would all turn off and the first major current source would turn on. To continue counting upward, the 5 LSBs would count up another 31 codes, and then the next major current source would turn on and the five LSBs would all turn off. The process of the single, equivalent, major current source turning on and the five LSBs turning off each time the converter reaches another 31 codes greatly reduces the glitch at any one switching point. In previous architectures that contained all binary weighted current sources or a binary weighted resistor ladder, the converter might have a substantially larger amount of current turning on and off at certain, worst-case transition points such as mid-scale and quarter scale transitions. By greatly reducing the amount of current switching at certain ‘major’ transitions, the overall glitch of the converter is dramatically reduced, improving settling times and transient problems. Digital Inputs And Termination The HI5728 digital inputs are guaranteed to CMOS levels. However, TTL compatibility can be achieved by lowering the supply voltage to 3V due to the digital threshold of the input buffer being approximately half of the supply voltage. The internal register is updated on the rising edge of the clock. To minimize reflections, proper termination should be implemented. If the lines driving the clock(s) and digital inputs are 50 lines, then 50 termination resistors should be placed as close to the converter inputs as possible. Ground Plane(s) If separate digital and analog ground planes are used, then all of the digital functions of the device and their corresponding components should be over the digital ground plane and terminated to the digital ground plane. The same is true for the analog components and the analog ground plane. Refer to the Application Note on the HI5728 Evaluation Board for further discussion of the ground plane(s) upon availability. Noise Reduction To minimize power supply noise, 0.1µF capacitors should be placed as close as possible to the converter’s power supply pins, AVDD and DVDD. Also, should the layout be designed using separate digital and analog ground planes, these capacitors should be terminated to the digital ground for DVDD and to the analog ground for AVDD . Additional filtering of the power supplies on the board is recommended. See the Application Note on the HI5728 Evaluation Board for more information upon availability. Page 17 of 19 HI5728 Voltage Reference The internal voltage reference of the device has a nominal value of +1.2V with a 60 ppm/°C drift coefficient over the full temperature range of the converter. It is recommended that a 0.1F capacitor be placed as close as possible to the REFIO pin, connected to the analog ground. The REFLO pin (15) selects the reference. The internal reference can be selected if pin 15 is tied low (ground). If an external reference is desired, then pin 15 should be tied high (to the analog supply voltage) and the external reference driven into REFIO, pin 23. The full scale output current of the converter is a function of the voltage reference used and the value of RSET. IOUT should be within the 2mA to 20mA range, through operation below 2mA is possible, with performance degradation. If the internal reference is used, VFSADJ will equal approximately 1.16V (pin 22). If an external reference is used, VFSADJ will equal the external reference. The calculation for IOUT(Full Scale) is: I OUT  Full Scale  = V FSADJ  R SET  32 (EQ. 1) If the full scale output current is set to 20mA by using the internal voltage reference (1.16V) and a 1.86k RSET resistor, then the input coding to output current will resemble the following: negative voltage output compliance range limit is -300mV, imposing a maximum of 600mVP-P amplitude with this configuration. The loading as shown in Figure 1 will result in a 500mV signal at the output of the transformer if the full scale output current of the DAC is set to 20mA. 50 PIN 17 (20) 100 PIN 16 (21) VOUT = (2 x IOUT x REQ)V IOUTB (QOUTB) IOUTA (QOUTA) 50 50 FIGURE 42. VOUT = 2 x IOUT x REQ ,where REQ is ~12.5. Allowing the center tap to float will result in identical transformer output, however the output pins of the DAC will have positive DC offset. The 50 load on the output of the transformer represents the spectrum analyzer’s input impedance. TABLE 1. INPUT CODING vs OUTPUT CURRENT (Per DAC) INPUT CODE (D9-D0) IOUTA (mA) IOUTB (mA) 11111 11111 20 0 10000 00000 10 10 00000 00000 0 20 Outputs IOUTA and IOUTB (or QOUTA and QOUTB) are complementary current outputs. The sum of the two currents is always equal to the full scale output current minus one LSB. If single ended use is desired, a load resistor can be used to convert the output current to a voltage. It is recommended that the unused output be either grounded or equally terminated. The voltage developed at the output must not violate the output voltage compliance range of -0.3V to 1.25V. RLOAD should be chosen so that the desired output voltage is produced in conjunction with the output full scale current, which is described above in the ‘Reference’ section. If a known line impedance is to be driven, then the output load resistor should be chosen to match this impedance. The output voltage equation is: V OUT = I OUT  R LOAD (EQ. 2) These outputs can be used in a differential-to-single-ended arrangement to achieve better harmonic rejection. The SFDR measurements in this data sheet were performed with a 1:1 transformer on the output of the DAC (see Figure 1). With the center tap grounded, the output swing of pins 16 and 17 will be biased at zero volts. It is important to note here that the FN4321 Rev 5.00 January 22, 2010 Page 18 of 19 HI5728 Thin Plastic Quad Flatpack Packages (LQFP) Q48.7x7A (JEDEC MS-026BBC ISSUE B) 48 LEAD THIN PLASTIC QUAD FLATPACK PACKAGE D D1 -D- INCHES -A- -B- E E1 e PIN 1 SEATING A PLANE -H- 0.08 0.003 -C- MILLIMETERS SYMBOL MIN MAX MIN MAX NOTES A - 0.062 - 1.60 - A1 0.002 0.005 0.05 0.15 - A2 0.054 0.057 1.35 1.45 - b 0.007 0.010 0.17 0.27 6 b1 0.007 0.009 0.17 0.23 - D 0.350 0.358 8.90 9.10 3 D1 0.272 0.280 6.90 7.10 4, 5 E 0.350 0.358 8.90 9.10 3 E1 0.272 0.280 6.90 7.10 4, 5 L 0.018 0.029 0.45 0.75 N 48 48 e 0.020 BSC 0.50 BSC 7 Rev. 2 1/99 NOTES: 1. Controlling dimension: MILLIMETER. Converted inch dimensions are not necessarily exact. 2. All dimensions and tolerances per ANSI Y14.5M-1982. 3. Dimensions D and E to be determined at seating plane -C- . 0.08 0.003 M D S C A-B S b 11o-13o 0.020 0.008 MIN b1 0o MIN A2 A1 GAGE PLANE 0o-7o 0.25 0.010 11o-13o 5. Dimensions D1 and E1 do not include mold protrusion. Allowable protrusion is 0.25mm (0.010 inch) per side. 6. Dimension b does not include dambar protrusion. Allowable dambar protrusion shall not cause the lead width to exceed the maximum b dimension by more than 0.08mm (0.003 inch). 0.09/0.16 0.004/0.006 BASE METAL WITH PLATING L 4. Dimensions D1 and E1 to be determined at datum plane -H- . 7. “N” is the number of terminal positions. 0.09/0.20 0.004/0.008 © Copyright Intersil Americas LLC 1999-2010. All Rights Reserved. All trademarks and registered trademarks are the property of their respective owners. For additional products, see www.intersil.com/en/products.html Intersil products are manufactured, assembled and tested utilizing ISO9001 quality systems as noted in the quality certifications found at www.intersil.com/en/support/qualandreliability.html Intersil products are sold by description only. Intersil may modify the circuit design and/or specifications of products at any time without notice, provided that such modification does not, in Intersil's sole judgment, affect the form, fit or function of the product. Accordingly, the reader is cautioned to verify that datasheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see www.intersil.com FN4321 Rev 5.00 January 22, 2010 Page 19 of 19