HXR5112A-DNT

12 Channel 14Gb/s Receiver Description Features The HXR5112A Transimpedance Limiting Amplifier array is a member of the family of Optical Receiver Transmitter Array (ORTA) products targeted at the parallel optical links market. Together with a PIN detector array or discrete detectors, high-capacity, high availability optical links can be designed for datacom applications. • • • • • The 3.3V SiGe device integrates the transimpedance pre-amplifier, the limiting postamplifier and a versatile CML output stage for twelve optical channels. • Short-Form Datasheet 20µApp receiver sensitivity for 10-12 BER at 10.3Gbps. Better than 1.0mApp overload 66mW per channel power consumption Adjustable output swing size and preemphasis in limiting mode and signal detect threshold Independent RSSI Optimized for isolated and common cathode photo-detector arrays from multiple vendors Control lines accessible on both sides of the chip Ordering Information Typical Applications • • • HXR5112A IEEE 802.3ba Ethernet transceivers Infiniband QDR & FDR active cables Proprietary multi-channel optical modules Part Temp. Range Pin-Package HXR5112A-DNT 0°C to +85°C HXR5112A-BNT 0°C to +85°C Bare Die 2.05mm x 3.65mm Bare Die with solder bump for flip chip assembly For price, delivery schedules, and to place orders, contact IDT at www.IDT.com/go/sales. Block Diagram Figure 1. Block Diagram © 2018 Integrated Device Technology, Inc. 1 February 22, 2018 HXR5112A Short-Form Datasheet Corporate Headquarters Sales 6024 Silver Creek Valley Road San Jose, CA 95138 www.IDT.com 1-800-345-7015 or 408-284-8200 Fax: 408-284-2775 www.IDT.com/go/sales Tech Support www.IDT.com/go/support DISCLAIMER Integrated Device Technology, Inc. (IDT) and its affiliated companies (herein referred to as “IDT”) reserve the right to modify the products and/or specifications described herein at any time, without notice, at IDT's sole discretion. Performance specifications and operating parameters of the described products are determined in an independent state and are not guaranteed to perform the same way when installed in customer products. The information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the suitability of IDT's products for any particular purpose, an implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not convey any license under intellectual property rights of IDT or any third parties. IDT's products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the failure or malfunction of an IDT product can be reasonably expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT. Integrated Device Technology, IDT and the IDT logo are trademarks or registered trademarks of IDT and its subsidiaries in the United States and other countries. Other trademarks used herein are the property of IDT or their respective third party owners. For datasheet type definitions and a glossary of common terms, visit www.idt.com/go/glossary. All contents of this document are copyright of Integrated Device Technology, Inc. All rights reserved. © 2018 Integrated Device Technology, Inc. 2 February 22, 2018