HXT6112-DNT

HXT6112 12 Channel 16Gb/s VCSEL Driver Product Brief General Description Features The HXT6112 VCSEL driver array is a key component for compact, robust, low-power optical transmitter modules. In conjunction with the VCSEL array, the chip handles the complete digital-to-optical conversion, including CML input, laser driver, drive control, and supervision. Standard silicon technology and a small number of additional components allow for cost-effective and compact assemblies. • Low power consumption of 46mW per channel while delivering 5mA average and 5mA modulation current • Compatible with common cathode and isolated VCSEL arrays • 2-wire interface control and symmetric pad design maximize module design flexibility • 10 mA Average and 10 mA Modulation current max. • 15mA burn-in current max. • InfiniBand QDR/FDR compliant Applications • IEEE 802.3ba Ethernet transceivers • InfiniBand QDR & FDR active cables • Proprietary multi-channel optical modules Ordering Information Device Diagram Part Temp Range HXT6112-DNT 0°C to +85°C HXT6112-EVB Room Temp Pin-Package Bare Die 2.05mm x 3.65mm Evaluation Board For price, delivery schedules, and to place orders, please contact IDT: www.IDT.com/go/sales Figure 1: Device diagram © 2017 Integrated Device Technology, Inc. 1 May 30, 2017 Corporate Headquarters Sales Tech Support 6024 Silver Creek Valley Road San Jose, CA 95138 www.IDT.com 1-800-345-7015 or 408-284-8200 Fax: 408-284-2775 www.IDT.com/go/sales www.IDT.com/go/support DISCLAIMER Integrated Device Technology, Inc. (IDT) and its affiliated companies (herein referred to as “IDT”) reserve the right to modify the products and/or specifications described herein at any time, without notice, at IDT's sole discretion. Performance specifications and operati ng parameters of the described products are determined in an independent state and are not guaranteed to perform the same way when installed in customer products. The information contained herein is provided without representation or warranty of a ny kind, whether express or implied, including, but not limited to, the suitability of IDT's products for any particular purpose, an implied warranty of merchantability, or non -infringement of the intellectual property rights of others. This document is presented o nly as a guide and does not convey any license under intellectual property rights of IDT or any third parties. IDT's products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the failure or malfunction of an IDT product can be reasonably expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT. Integrated Device Technology, IDT and the IDT logo are trademarks or registered trademarks of IDT and its subsidiaries in the United States and other countries. Other trademarks used herein are the property of IDT or their respective third party owners. For datasheet type definitions and a glossary of common terms, visit www.idt.com/go/glossary. All contents of this document are copyright of Integrated Device Technology, Inc. All rights reserved.