ISL84051IA-T

DATASHEET ISL84051, ISL84052, ISL84053 Low Voltage, Single and Dual Supply, 8-to-1 Multiplexer, Dual 4-to-1 Multiplexer and a Triple SPDT Analog Switch The Intersil ISL84051, ISL84052, ISL84053 devices are precision, bidirectional, analog switches configured as a 8-Channel multiplexer/demultiplexer (ISL84051), a dual differential 4-Channel multiplexer/demultiplexer (ISL84052) and a triple single pole/double throw (SPDT) switch (ISL84053) designed to operate from a single +2V to +12V supply or from a ±2V to ±6V supply. All devices have an inhibit pin to simultaneously open all signal paths. ON-resistance is 60Ω with a ±5V supply and 125Ω with a single +5V supply. Each switch can handle rail to rail analog signals. The off-leakage current is only 5nA at +85°C with a ±5V supply. All digital inputs have 0.8V to 2.4V logic thresholds, ensuring TTL/CMOS logic compatibility when using a single +3.3V and +5V supply or dual ±5V supplies. The ISL84051 is a 8-to-1 multiplexer device. The ISL84052 is a dual 4-to-1 multiplexer device. The ISL84053 is a committed triple SPDT, which is perfect for use in 2-to-1 multiplexer applications. ±5V tON/tOFF 5V rON 5V tON/tOFF 3V rON 3V tON/tOFF ISL84051 ISL84052 ISL84053 8:1 Mux DUAL 4:1 Mux TRIPLE SPDT 60Ω 60Ω 60Ω 50ns/40ns 50ns/40ns 50ns/40ns 125Ω 125Ω 125Ω 90ns/60ns 90ns/60ns 90ns/60ns 250Ω 250Ω 250Ω 180ns/100ns 180ns/100ns 180ns/100ns Packages 16 Ld SOIC 16 Ld SOIC 16 Ld SOIC 16 Ld QSOP 16 Ld QSOP 16 Ld QSOP 16 Ld TSSOP 16 Ld TSSOP 16 Ld TSSOP Related Literature • Technical Brief TB363 “Guidelines for Handling and Processing Moisture Sensitive Surface Mount Devices (SMDs)” • Application Note AN557 “Recommended Test Procedures for Analog Switches” FN6047 Rev.10.00 May 16, 2011 • Drop-in Replacements for MAX4051/MAX4051A, MAX4052/MAX4052A and MAX4053/MAX4053A • Pin Compatible with MAX4581, MAX4582, MAX4583 and with Industry Standard 74HC4051, 74HC4052 and 74HC4053 • ON-Resistance (rON) Max, VS = ±5V . . . . . . . . . . . . . . . . . 100Ω • ON-Resistance (rON) Max, VS = +5V . . . . . . . . . . . . . . . . . 225Ω • rON Matching Between Channels . . . . . . . . . . . . . . . . . . . . . . 2kV Thermal Resistance (Typical, Notes 6, 7) JA (°C/W) JC (°C/W) 16 Ld SOIC Package . . . . . . . . . . . . . . . . . . 75 39 16 Ld QSOP Package. . . . . . . . . . . . . . . . . . 95 56 16 Ld TSSOP Package . . . . . . . . . . . . . . . . . 110 33 Maximum Junction Temperature (Plastic Package) . . . . . . . . . . . +150°C Maximum Storage Temperature Range. . . . . . . . . . . . . . . . . -65°C to +150°C Pb-Free Reflow Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . see link below http://www.intersil.com/pbfree/Pb-FreeReflow.asp Operating Conditions Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40°C to +85°C CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product reliability and result in failures not covered by warranty. NOTES: 5. Signals on NC, NO, COM, ADD, or INH exceeding V+ or V- are clamped by internal diodes. Limit forward diode current to maximum current ratings. 6. JA is measured with the component mounted on a high effective thermal conductivity test board in free air. See Tech Brief TB379 for details. 7. For JC, the “case temp” location is taken at the package top center. Electrical Specifications 5V Supply Test Conditions: VSUPPLY = ±4.5V to ±5.5V, GND = 0V, VINH = 2.4V, VINL = 0.8V (Note 8), Unless Otherwise Specified. Boldface limits apply over the operating temperature range, -40°C to +85°C. TEMP (°C) MIN (Notes 9, 10) TYP MAX (Notes 9, 10) UNITS Full V- - V+ V VS = ±5V, ICOM = 1mA, VNO or VNC = ±3V (see Figure 5) +25 - 60 100 Ω Full - - 125 Ω rON Matching Between Channels, rON VS = ±5V, ICOM = 1mA, VNO or VNC = ±3V (Note 11) +25 - - 6 Ω Full - - 12 Ω rON Flatness, rFLAT(ON) VS = ±5V, ICOM = 1mA, VNO or VNC = ±3V, 0V (Note 12) +25 - - 10 Ω Full - - 15 Ω VS = ±5.5V, VCOM = ±4.5V, VNO or VNC = ±4.5V (Note 12) +25 - 0.002 - nA Full -5 - 5 nA COM OFF Leakage Current, ICOM(OFF), VS = ±5.5V, VCOM = ±4.5V, VNO or VNC = ±4.5V (ISL84051) (Note 12) +25 - 0.002 - nA Full -5 - 5 nA COM OFF Leakage Current, ICOM(OFF), VS = ±5.5V, VCOM = ±4.5V, VNO or VNC = ±4.5V (ISL84052, ISL84053) (Note 12) +25 - 0.002 - nA Full -2.5 - 2.5 nA COM ON Leakage Current, ICOM(ON), (ISL84051) VS = ±5.5V, VCOM = VNO or VNC = ±4.5V (Note 12) +25 - 0.002 - nA Full -5 - 5 nA COM ON Leakage Current, ICOM(ON), (ISL84052, ISL84053) VS = ±5.5V, VCOM = VNO or VNC = ±4.5V (Note 12) +25 - 0.002 - nA Full -2.5 - 2.5 nA Input Voltage High, VINH, VADDH Full 2.4 - - V Input Voltage Low, VINL, VADDL Full - - 0.8 V Full -1 0.03 1 µA PARAMETER TEST CONDITIONS ANALOG SWITCH CHARACTERISTICS Analog Signal Range, VANALOG ON-Resistance, rON NO or NC OFF Leakage Current, INO(OFF) or INC(OFF) DIGITAL INPUT CHARACTERISTICS Input Current, IINH, IINL, IADDH, IADDL FN6047 Rev.10.00 May 16, 2011 VS = ±5.5V, VINH, VADD = 0V or V+ Page 5 of 19 ISL84051, ISL84052, ISL84053 Electrical Specifications 5V Supply Test Conditions: VSUPPLY = ±4.5V to ±5.5V, GND = 0V, VINH = 2.4V, VINL = 0.8V (Note 8), Unless Otherwise Specified. Boldface limits apply over the operating temperature range, -40°C to +85°C. (Continued) TEMP (°C) MIN (Notes 9, 10) TYP MAX (Notes 9, 10) UNITS VS = ±4.5V, VNO or VNC = ±3V, RL = 300Ω, CL = 35pF, VIN = 0V to 3V (see Figure 1) +25 - 50 - ns Full - 60 - ns VS = ±4.5V, VNO or VNC = ±3V, RL = 300Ω, CL = 35pF, VIN = 0V to 3V (see Figure 1) +25 - 40 - ns Full - 50 - ns Address Transition Time, tTRANS VS = ±4.5V, VNO or VNC = ±3V, RL = 300Ω, CL = 35pF, VIN = 0V to 3V (see Figure 1) +25 - 75 - ns Break-Before-Make Time, tBBM VS = ±5.5V, VNO or VNC = 3V, RL = 300Ω, CL = 35pF, VIN = 0V to 3V (see Figure 3) +25 - 10 - ns Charge Injection, Q CL = 1.0nF, VG = 0V, RG = 0Ω (see Figure 2) +25 - 2 - pC NO/NC OFF-Capacitance, COFF f = 1MHz, VNO or VNC = VCOM = 0V (see Figure 7) +25 - 3 - pF COM OFF-Capacitance, COFF f = 1MHz, VNO or VNC = VCOM = 0V (see Figure 7) ISL84051 +25 - 21 - pF ISL84052 +25 - 12 - pF ISL84053 +25 - 9 - pF ISL84051 +25 - 26 - pF ISL84052 +25 - 18 - pF ISL84053 +25 - 14 - pF +25 -