M16C29_07

M16C/29 Group Standard Characteristics M30290FxHP(x=A,C),M30291FxHP(x=A,C), M30290FxTHP(x=A,C),M30291FxTHP(x=A,C), M30290FxVHP(x=A,C),M30291FxVHP(x=A,C) Standard Characteristics Example Standard characteristics described below are just examples of the M16C/29 group(M16C/29,M16C/29T,M16C/29V) characteristics and are not guaranteed. For rated values, refer to "M16C/29 Group Hardware manual". (1) Power Supply Current Standard Characteristics Example (Vcc-Icc) f(Xin)=20MHz (Pluse generator, Ta = 25°C, output transistor is in the cut-off state.*) 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 Clock source f(Xin) = Pulse Generator No Division Square wave Xout:Open Power Source Current Icc [mA] Division by 2 Division setting Main Clock Timer A, B Timer S Serial I/O MMIIC AD con -version Division by 4 Division by 8 Division by 16 1/1 1/2 1/4 1/8 1/16 ｆ1 f2 f8 f8 f32 f1 ｆ1sio f2 f2sio f2/4 f8sio f2/16 f8sio f2/16 f32sio (fiic/2)/31 (fiic/2)/31 (fiic/4)/31 (fiic/8)/31 (fiic/8)/31 fad/ 1 fad/ 2 fad/12 fad/12 fad/12 * Timer pulse and serial data is output * SDA MM & SCLMM are pull-up. 6.0 6.5 Power Source Voltage Vcc [V] Fig. 1. Vcc-Icc(at Nomal Operation Mode) No division operation(Pluse generator, Ta = 25 °C, output transistor is in the cut-off state.*) 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 Clock source f(Xin) = Pulse Generator f(Xin)=20MHz f(Xin)=16MHz Square wave Xout:Open Power Source Current Icc [mA] Division setting Main Clock Timer A, B Timer S Serial I/O MMIIC AD con -version f(Xin)=8MHz 1/1 ｆ1 f1 ｆ1sio (fiic/2)/31 fad/ 1 * Timer pulse and serial data is output * SDA MM & SCLMM are pull-up. f(Xin)=4MHz 6.0 6.5 Power Source Voltage Vcc [V] Fig. 2. Vcc-Icc(at Nomal Operation Mode) At WIT instruction executed (Pluse generator, Ta = 25 °C, output transistor is in the cut-off state.) A/D conversion not executed 2.0 Clock source f(Xin) = Pulse Generator Square wave Xout:Open Power Source Current Icc [mA] 1.5 Stop peripheral function clock. Xin-Xout drive capacity : High f(Xin)=20MHz 1.0 f(Xin)=16MHz 0.5 f(Xin)=8MHz f(Xin)=4MHz 0.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 Power Source Voltage Vcc [V] Fig. 3. Vcc-Icc (at WIT instruction executed) REJ99B1342-0100 ©2007. Renesas Technology Corp., All rights reserved. 2007.06 Page 1 of 17 M16C/29 Group Standard Characteristics M30290FxHP(x=A,C),M30291FxHP(x=A,C), M30290FxTHP(x=A,C),M30291FxTHP(x=A,C), M30290FxVHP(x=A,C),M30291FxVHP(x=A,C) f(Xcin)=32kHz in low-power consumption mode, Program running on RAM (Main clock oscillation stop, Ta = 25 °C, output transistor is in the cut-off state.) Clock source f(Xcin) = Crystal oscillator Frequency: 32.768kHz Load capacitance:12.5pF 25 Power Source Current Icc [μA] 20 No Peripheral functions. Xcin-Xcout drive capacity : Low Flash memory stop. 15 10 XCIN 5 XCOUT Rf Rf: Open Rd: 0 Ω C1: 15pF C2: 15pF Rd C2 C1 0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 Power Source Voltage Vcc [V] Fig. 4. Vcc-Icc (low-speed mode) f(Xcin)=32kHz in low-power consumption mode, Program running on flash memory (Main clock oscillation stop, Ta = 25 °C, output transistor is in the cut-off state.) Clock source f(Xcin) = Crystal oscillator Frequency: 32.768kHz Load capacitance:12.5pF 1000 Power Source Current Icc [μA] 800 No Peripheral functions. Xcin-Xcout drive capacity : Low 600 400 XCIN Rf XCOUT Rf: Open Rd: 0 Ω C1: 15pF C2: 15pF Rd C2 200 C1 0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 Power Source Voltage Vcc [V] Fig. 5. Vcc-Icc (low-speed mode) On-chip oscillator operating, f2(ROC) selected, f(BCLK)=1MHz (external oscillation stop, output transistor is in the cut-off state.* ) A/D conversion not executed Clock source 3.0 On-chip oscillator Select f2(ROC) 2.5 Power Source Current Icc [mA] 2.0 Division setting Program running on Flash memory Program running on RAM Program running on RAM Flash memory OFF ROC Divider Main Clock Timer A, B Timer S SI/O3 SI/O4 MMIIC 1.5 1/2 1/1 ｆ1 f1 f1 (fiic/2)/31 * Timer pulse and serial data is output 1.0 0.5 0.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 Power Source Voltage Vcc [V] Fig. 6. Vcc-Icc (On-chip oscillator operating) REJ99B1342-0100 ©2007. Renesas Technology Corp., All rights reserved. 2007.06 Page 2 of 17 M16C/29 Group Standard Characteristics M30290FxHP(x=A,C),M30291FxHP(x=A,C), M30290FxTHP(x=A,C),M30291FxTHP(x=A,C), M30290FxVHP(x=A,C),M30291FxVHP(x=A,C) f(Xcin)=32kHz in WIT instruction executed (crystal oscillation, Xcin-Xcout drive capacity low, Ta = 25 °C, output transistor is in the cut-off state.) Clock source f(Xcin) = Crystal oscillator Frequency: 32.768kHz Load capacitance:12.5pF 10 9 Power Source Current Icc [μA] 8 7 6 5 4 3 2 1 0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 Xcin-Xcout drive capacity : Low Timer A0 running in timer mode from fc32. XCIN Rf XCOUT Rf: Open Rd: 0 Ω C1: 15pF C2: 15pF Rd C2 C1 Power Source Voltage Vcc [V] Fig. 7. Vcc-Icc (at WIT instruction executed) REJ99B1342-0100 ©2007. Renesas Technology Corp., All rights reserved. 2007.06 Page 3 of 17 M16C/29 Group Standard Characteristics M30290FxHP(x=A,C),M30291FxHP(x=A,C), M30290FxTHP(x=A,C),M30291FxTHP(x=A,C), M30290FxVHP(x=A,C),M30291FxVHP(x=A,C) Standard Characteristics Example VOH-IOH (Vcc = 5.5V, Ports P00-P07, P10-P17, P20-P27, P30-P37, P60-P67, P70-P77 P80-P87, P90-P93, P95-P97, P100-P107) -50 Ta = -40 °C Ta = 25 °C -40 "H" Output Current IOH [mA] Ta = 85 °C Ta =125 °C -30 -20 -10 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 Fig. 9. VOH-IOH ( Vcc = 5.5V, Ports P00-P07, P10-P17, P20-P27, P30-P37, P60-P67, P70-P77 P80-P87, P90-P93, P95-P97, P100-P107) VOH-IOH (Vcc = 4.0V, Ports P00-P07, P10-P17, P20-P27, P30-P37, P60-P67, P70-P77 P80-P87, P90-P93, P95-P97, P100-P107) -30 Ta = -40 °C -25 Ta = 25 °C Ta = 85 °C -20 Ta = 125 °C -15 "H" Output Voltage VOH [V] "H" Output Current IOH [mA] -10 -5 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 "H" Output Voltage VOH [V] Fig. 10. VOH-IOH ( Vcc = 4.0V, Ports P00-P07, P10-P17, P20-P27, P30-P37, P60-P67, P70-P77 P80-P87, P90-P93, P95-P97, P100-P107) VOH-IOH (Vcc = 3.0V, Ports P00-P07, P10-P17, P20-P27, P30-P37, P60-P67, P70-P77 P80-P87, P90-P93, P95-P97, P100-P107) -20 -18 -16 Ta = -40 °C Ta = 25 °C Ta = 85 °C Ta = 125 °C "H" Output Current IOH [mA] -14 -12 -10 -8 -6 -4 -2 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 "H" Output Voltage VOH [V] Fig. 11. VOH-IOH ( Vcc = 3.0V, Ports P00-P07, P10-P17, P20-P27, P30-P37, P60-P67, P70-P77 P80-P87, P90-P93, P95-P97, P100-P107) REJ99B1342-0100 ©2007. Renesas Technology Corp., All rights reserved. 2007.06 Page 4 of 17 M16C/29 Group Standard Characteristics M30290FxHP(x=A,C),M30291FxHP(x=A,C), M30290FxTHP(x=A,C),M30291FxTHP(x=A,C), M30290FxVHP(x=A,C),M30291FxVHP(x=A,C) (3) Port Standard Characteristics Example (VOL-IOL) VOL-IOL (Vcc = 5.5V, Ports P00-P07, P10-P17, P20-P27, P30-P37, P60-P67, P70-P77 P80-P87, P90-P93, P95-P97, P100-P107) 40 Ta =- 40 °C 35 Ta = 25 °C 30 25 20 15 10 5 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 "L" Output Current IOL [mA] Ta = 85 °C Ta = 125 ° "L" Output Voltage VOL [V] Fig. 12. VOL-IOL ( Vcc = 5.5V, Ports P00-P07, P10-P17, P20-P27, P30-P37, P60-P67, P70-P77 P80-P87, P90-P93, P95-P97, P100-P107) VOL-IOL (Vcc = 4.0V, Ports P00-P07, P10-P17, P20-P27, P30-P37, P60-P67, P70-P77 P80-P87, P90-P93, P95-P97, P100-P107) 30 25 Ta = -40 °C Ta = 25 °C Ta = 85 °C "L" Output Current IOL [mA] 20 15 Ta = 125 °C 10 5 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 "L" Output Voltage VOL [V] Fig. 13. VOL-IOL ( Vcc = 4.0V, Ports P00-P07, P10-P17, P20-P27, P30-P37, P60-P67, P70-P77 P80-P87, P90-P93, P95-P97, P100-P107) VOL-IOL (Vcc = 3.0V, Ports P00-P07, P10-P17, P20-P27, P30-P37, P60-P67, P70-P77 P80-P87, P90-P93, P95-P97, P100-P107) 20 18 16 "L" Output Current IOL [mA] 14 12 10 8 6 4 2 0 0.0 0.5 1.0 1.5 2.0 2.5 Ta = -40 °C Ta = 25 °C Ta = 85 °C Ta =125 °C 3.0 "L" Output Voltage VOL [V] Fig. 14. VOL-IOL ( Vcc = 3.0V, Ports P00-P07, P10-P17, P20-P27, P30-P37, P60-P67, P70-P77 P80-P87, P90-P93, P95-P97, P100-P107) REJ99B1342-0100 ©2007. Renesas Technology Corp., All rights reserved. 2007.06 Page 5 of 17 M16C/29 Group Standard Characteristics M30290FxHP(x=A,C),M30291FxHP(x=A,C), M30290FxTHP(x=A,C),M30291FxTHP(x=A,C), M30290FxVHP(x=A,C),M30291FxVHP(x=A,C) (4) Port Standard Characteristics Example (Vcc-IIL) Vcc-IIL ( Ports P00-P07, P10-P17, P20-P27, P30-P37, P60-P67, P70-P77 P80-P87, P90-P93, P95-P97, P100-P107 when connecting pull-up transistor.) Power Source Voltage Vcc [V] -150 Ta =-40 °C -130 "L" Input Current IIL [μA] -110 Ta =25 °C -90 -70 -50 -30 -10 2.5 3.0 3.5 4.0 4.5 5.0 Ta =85 °C Ta =125°C 5.5 6.0 Power Source Voltage Vcc [V] Fig. 15. Vcc-IIL ( Ports P00-P07, P10-P17, P20-P27, P30-P37, P60-P67, P70-P77 P80-P87, P90-P93, P95-P97, P100-P107 when connecting pull-up transistor.) REJ99B1342-0100 ©2007. Renesas Technology Corp., All rights reserved. 2007.06 Page 6 of 17 M16C/29 Group Standard Characteristics M30290FxHP(x=A,C),M30291FxHP(x=A,C), M30290FxTHP(x=A,C),M30291FxTHP(x=A,C), M30290FxVHP(x=A,C),M30291FxVHP(x=A,C) (5) Port Standard Characteristics Example (Vcc-VIH VIL) Vcc-VIH VIL (I/O Ports (CMOS) , Ports P60-P67, P70-P77, P80, P81, P85-P87, P90-P93, P100-P107, Ta = 25℃) 5 4 Input Voltage VIH VIL [V] 3 2 1 0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 Power Source Voltage Vcc [V] Fig. 16. Vcc-VIH VIL (I/O Ports (CMOS) , Ports P60-P67, P70-P77, P80, P81, P85-P87, P90-P93, P100-P107) Vcc-VIH VIL (I/O Ports, Ports P15-P17, P82, P84, Ta = 25 ℃) 5 4 Input Voltage VIH VIL [V] 3 VIH VIL 2 1 0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 Power Source Voltage Vcc [V] Fig. 17. Vcc-VIH VIL (I/O Ports, Ports P15-P17, P82, P84) REJ99B1342-0100 ©2007. Renesas Technology Corp., All rights reserved. 2007.06 Page 7 of 17 M16C/29 Group Standard Characteristics M30290FxHP(x=A,C),M30291FxHP(x=A,C), M30290FxTHP(x=A,C),M30291FxTHP(x=A,C), M30290FxVHP(x=A,C),M30291FxVHP(x=A,C) Vcc-VIH VIL (RESET pin, Ta = 25 ℃) 5 4 VIH Input Voltage VIH VIL [V] 3 2 VIL 1 0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 Power Source Voltage Vcc [V] Fig. 18. Vcc-VIH VIL (RESET pin) Vcc-VIH VIL (XIN pin, Ta = 25℃) 5 4 Input Voltage VIH VIL [V] 3 VIH VIL 2 1 0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 Power Source Voltage Vcc [V] Fig. 19. Vcc-VIH VIL (XIN pin) REJ99B1342-0100 ©2007. Renesas Technology Corp., All rights reserved. 2007.06 Page 8 of 17 M16C/29 Group Standard Characteristics M30290FxHP(x=A,C),M30291FxHP(x=A,C), M30290FxTHP(x=A,C),M30291FxTHP(x=A,C), M30290FxVHP(x=A,C),M30291FxVHP(x=A,C) Vcc-HYS (RESET pin, Ta = 25 ℃) 2.5 2.0 Hysteresis HYS [V] 1.5 1.0 0.5 0.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 Power Source Voltage Vcc [V] Fig. 20. Vcc-HYS (RESET pin) Vcc-HYS (INT2-INT5, TA0IN-TA1IN, ADTRIG, CTS0-CTS2, CLK1-CLK2, TA0OUT-TA1OUT, RxD1-RxD2. Ta = 25 ℃) 1.0 0.8 Hysteresis HYS [V] 0.6 0.4 0.2 0.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 Fig. 21. Vcc-HYS ( INT2-INT5, TA0IN-TA1IN, ADTRIG, CTS0-CTS2, CLK1-CLK2, TA0OUT-TA1OUT, RxD1-RxD2 ) Vcc-HYS (INT0- INT1, TA2IN-TA4IN, TB0IN-TB2IN, NMI, CTS0-CTS1, CLK0-CLK1, TA2OUT-TA4OUT, KI0-KI3, RxD0-RxD1, SIN3-SIN4. Ta = 25℃) 1.0 Power Source Voltage Vcc [V] 0.8 Hysteresis HYS [V] 0.6 0.4 0.2 0.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 Power Source Voltage Vcc [V] Fig. 22. Vcc-HYS ( INT0- INT1, TA2IN-TA4IN, TB0IN-TB2IN, NMI, CTS0-CTS1, CLK0-CLK1, TA2OUT-TA4OUT, KI0-KI3, RxD0-RxD1, SIN3-SIN4 ) REJ99B1342-0100 ©2007. Renesas Technology Corp., All rights reserved. 2007.06 Page 9 of 17 M16C/29 Group Standard Characteristics M30290FxHP(x=A,C),M30291FxHP(x=A,C), M30290FxTHP(x=A,C),M30291FxTHP(x=A,C), M30290FxVHP(x=A,C),M30291FxVHP(x=A,C) Standard Characteristics Example A/D conversion accuracy standard characteristics example-1 A/D CONVERTER STEP WIDTH MEASUREMENT • Vcc = 5.12[V] • VREF = 5.12[V] • f(XIN) = 20[MHz] • 1LSB Width = 5.12[V] / 1024 = 5[mV] 3.0 2.5 2.0 • Temp. = 25[°C] • BCLK=20MHz • A/D conversion clock = 10MHz • A/D conversion mode = 10bit 1LSB Width Error 1LSB Width Absolute accuracy [LSB] 1.5 1.0 0.5 0.0 -0.5 -1.0 -1.5 -2.0 -2.5 -3.0 0 16 32 48 64 80 96 112 Error 128 144 160 176 192 208 224 240 256 Conversion value 3.0 2.5 2.0 Absolute accuracy [LSB] 1.5 1.0 0.5 0.0 -0.5 -1.0 -1.5 -2.0 -2.5 -3.0 256 272 288 304 320 336 352 368 384 400 416 432 448 464 480 496 512 Conversion value 3.0 2.5 2.0 Absolute accuracy [LSB] 1.5 1.0 0.5 0.0 -0.5 -1.0 -1.5 -2.0 -2.5 -3.0 512 528 544 560 576 592 608 624 640 656 672 688 704 720 736 752 768 Conversion value 3.0 2.5 2.0 Absolute accuracy [LSB] 1.5 1.0 0.5 0.0 -0.5 -1.0 -1.5 -2.0 -2.5 -3.0 768 784 800 816 832 848 864 880 896 912 928 944 960 976 992 1008 1024 Conversion value Fig. 23. A/D conversion accuracy standard characteristics example-1 REJ99B1342-0100 ©2007. Renesas Technology Corp., All rights reserved. 2007.06 Page 10 of 17 M16C/29 Group Standard Characteristics M30290FxHP(x=A,C),M30291FxHP(x=A,C), M30290FxTHP(x=A,C),M30291FxTHP(x=A,C), M30290FxVHP(x=A,C),M30291FxVHP(x=A,C) A/D conversion accuracy standard characteristics example-2 A/D CONVERTER STEP WIDTH MEASUREMENT • Vcc = 5.12[V] • VREF = 5.12[V] • f(XIN) = 10[MHz] • 1LSB Width = 5.12[V] / 1024 = 5[mV] 3.0 2.5 2.0 • Temp. = 25[°C] • BCLK=10MHz • A/D conversion clock = 10MHz • A/D conversion mode = 10bit 1LSB Width Error 1LSB Width Absolute accuracy [LSB] 1.5 1.0 0.5 0.0 -0.5 -1.0 -1.5 -2.0 -2.5 -3.0 0 16 32 48 64 80 96 112 Error 128 144 160 176 192 208 224 240 256 Conversion value 3.0 2.5 2.0 Absolute accuracy [LSB] 1.5 1.0 0.5 0.0 -0.5 -1.0 -1.5 -2.0 -2.5 -3.0 256 272 288 304 320 336 352 368 384 400 416 432 448 464 480 496 512 Conversion value 3.0 2.5 2.0 Absolute accuracy [LSB] 1.5 1.0 0.5 0.0 -0.5 -1.0 -1.5 -2.0 -2.5 -3.0 512 528 544 560 576 592 608 624 640 656 672 688 704 720 736 752 768 Conversion value 3.0 2.5 2.0 Absolute accuracy [LSB] 1.5 1.0 0.5 0.0 -0.5 -1.0 -1.5 -2.0 -2.5 -3.0 768 784 800 816 832 848 864 880 896 912 928 944 960 976 992 1008 1024 Conversion value Fig. 24. A/D conversion accuracy standard characteristics example-2 REJ99B1342-0100 ©2007. Renesas Technology Corp., All rights reserved. 2007.06 Page 11 of 17 M16C/29 Group Standard Characteristics M30290FxHP(x=A,C),M30291FxHP(x=A,C), M30290FxTHP(x=A,C),M30291FxTHP(x=A,C), M30290FxVHP(x=A,C),M30291FxVHP(x=A,C) A/D conversion accuracy standard characteristics example-3 A/D CONVERTER STEP WIDTH MEASUREMENT • Vcc = 5.12[V] • VREF = 5.12[V] • f(XIN) = 20[MHz] • 1LSB Width = 5.12[V] / 256 = 20[mV] 3.0 2.5 2.0 • Temp. = 25[°C] • BCLK=20MHz • A/D conversion clock = 10MHz • A/D conversion mode = 8bit 1LSB Width Error 1LSB Width Absolute accuracy [LSB] 1.5 1.0 0.5 0.0 -0.5 -1.0 -1.5 -2.0 -2.5 -3.0 0 16 32 48 Error 64 80 96 112 128 Conversion value 3.0 2.5 2.0 Absolute accuracy [LSB] 1.5 1.0 0.5 0.0 -0.5 -1.0 -1.5 -2.0 -2.5 -3.0 128 144 160 176 192 208 224 240 256 Conversion value Fig. 25. A/D conversion accuracy standard characteristics example-3 REJ99B1342-0100 ©2007. Renesas Technology Corp., All rights reserved. 2007.06 Page 12 of 17 M16C/29 Group Standard Characteristics M30290FxHP(x=A,C),M30291FxHP(x=A,C), M30290FxTHP(x=A,C),M30291FxTHP(x=A,C), M30290FxVHP(x=A,C),M30291FxVHP(x=A,C) A/D conversion accuracy standard characteristics example-4 A/D CONVERTER STEP WIDTH MEASUREMENT • Vcc = 3.3[V] • VREF =3.3[V] • OCO • 1LSB Width = 3.3[V] / 1024 = 3.2[mV] 3.0 2.5 2.0 • Temp. = 25[°C] • CPU mode = 1MHz • A/D conversion clock = 1MHz • A/D conversion mode = 10bit 1LSB Width Error 1LSB Width Absolute accuracy [LSB] 1.5 1.0 0.5 0.0 -0.5 -1.0 -1.5 -2.0 -2.5 -3.0 0 16 32 48 64 80 96 112 Error 128 144 160 176 192 208 224 240 256 Conversion value 3.0 2.5 2.0 Absolute accuracy [LSB] 1.5 1.0 0.5 0.0 -0.5 -1.0 -1.5 -2.0 -2.5 -3.0 256 272 288 304 320 336 352 368 384 400 416 432 448 464 480 496 512 Conversion value 3.0 2.5 2.0 Absolute accuracy [LSB] 1.5 1.0 0.5 0.0 -0.5 -1.0 -1.5 -2.0 -2.5 -3.0 512 528 544 560 576 592 608 624 640 656 672 688 704 720 736 752 768 Conversion value 3.0 2.5 2.0 Absolute accuracy [LSB] 1.5 1.0 0.5 0.0 -0.5 -1.0 -1.5 -2.0 -2.5 -3.0 768 784 800 816 832 848 864 880 896 912 928 944 960 976 992 1008 1024 Conversion value Fig. 26. A/D conversion accuracy standard characteristics example-4 REJ99B1342-0100 ©2007. Renesas Technology Corp., All rights reserved. 2007.06 Page 13 of 17 M16C/29 Group Standard Characteristics M30290FxHP(x=A,C),M30291FxHP(x=A,C), M30290FxTHP(x=A,C),M30291FxTHP(x=A,C), M30290FxVHP(x=A,C),M30291FxVHP(x=A,C) A/D conversion accuracy standard characteristics example-5 A/D CONVERTER STEP WIDTH MEASUREMENT • Vcc = 3.3[V] • VREF =3.3[V] • OCO • 1LSB Width =3.3[V] / 256 = 12.9[mV] 3.0 2.5 2.0 • Temp. = 25[°C] • CPU mode =1MHz • A/D conversion clock =1MHz • A/D conversion mode = 8bit 1LSB Width Error 1LSB Width Absolute accuracy [LSB] 1.5 1.0 0.5 0.0 -0.5 -1.0 -1.5 -2.0 -2.5 -3.0 0 16 32 48 Error 64 80 96 112 128 Conversion value 3.0 2.5 2.0 Absolute accuracy [LSB] 1.5 1.0 0.5 0.0 -0.5 -1.0 -1.5 -2.0 -2.5 -3.0 128 144 160 176 192 208 224 240 256 Conversion value Fig. 27. A/D conversion accuracy standard characteristics example-5 REJ99B1342-0100 ©2007. Renesas Technology Corp., All rights reserved. 2007.06 Page 14 of 17 M16C/29 Group Standard Characteristics M30290FxHP(x=A,C),M30291FxHP(x=A,C), M30290FxTHP(x=A,C),M30291FxTHP(x=A,C), M30290FxVHP(x=A,C),M30291FxVHP(x=A,C) Standard Characteristics Example On-chip oscillator frequency characteristics (Vcc-f1(ROC)) 1.4 On-chip oscillator frequency ROCO [MHz] 1.2 -40℃ 25℃ 1 85℃ 125℃ 0.8 0.6 0.4 0.2 0 2.5 3 3.5 4 4.5 5 5.5 6 Power Source Voltage Vcc [V] Fig. 28. Vcc-f1(ROC) On-chip oscillator frequency characteristics (Ta-f1(ROC)) 1.4 On-chip oscillator frequency ROCO [MHz] 1.2 1 Vcc=5.0V 0.8 Vcc=3.0V 0.6 0.4 0.2 0 -50 -25 0 25 50 75 100 125 Temperature [°C] Fig. 29. Ta-f1(ROC) REJ99B1342-0100 ©2007. Renesas Technology Corp., All rights reserved. 2007.06 Page 15 of 17 M16C/29 Group Standard Characteristics M30290FxHP(x=A,C),M30291FxHP(x=A,C), M30290FxTHP(x=A,C),M30291FxTHP(x=A,C), M30290FxVHP(x=A,C),M30291FxVHP(x=A,C) On-chip oscillator frequency characteristics (Vcc-f2(ROC)) 2.5 -40℃ On-chip oscillator frequency ROCO [MHz] 25℃ 2 85℃ 125℃ 1.5 1 0.5 0 2.5 3 3.5 4 4.5 5 5.5 6 Power Source Voltage Vcc [V] Fig. 30. Vcc-f2(ROC) On-chip oscillator frequency characteristics (Ta-f2(ROC)) 2.5 On-chip oscillator frequency ROCO [MHz] 2 Vcc=5.0V 1.5 Vcc=3.0V 1 0.5 0 -50 -25 0 25 50 75 100 125 Temperature [°C] Fig. 31. Ta-f2(ROC) REJ99B1342-0100 ©2007. Renesas Technology Corp., All rights reserved. 2007.06 Page 16 of 17 M16C/29 Group Standard Characteristics M30290FxHP(x=A,C),M30291FxHP(x=A,C), M30290FxTHP(x=A,C),M30291FxTHP(x=A,C), M30290FxVHP(x=A,C),M30291FxVHP(x=A,C) On-chip oscillator frequency characteristics (Vcc-f3(ROC)) 20 -40℃ On-chip oscillator frequency ROCO [MHz] 18 16 14 12 10 8 6 4 2 0 2.5 3 3.5 4 4.5 5 5.5 25℃ 85℃ 125℃ 6 Power Source Voltage Vcc [V] Fig. 32. Vcc-f3(ROC) On-chip oscillator frequency characteristics (Ta-f3(ROC)) 20 18 16 On-chip oscillator frequency ROCO [MHz] Vcc=5.0V 14 12 10 8 6 4 2 0 -50 -25 0 25 50 75 100 125 Vcc=3.0V Temperature [°C] Fig. 33. Ta-f3(ROC) REJ99B1342-0100 ©2007. Renesas Technology Corp., All rights reserved. 2007.06 Page 17 of 17