Data Sheet
PS2561D-1, PS2561DL-1,
PS2561DL1-1, PS2561DL2-1
DIP PHOTOCOUPLER OPERATING AMBIENT TEMPERATURE 110 °C
R08DS0181EJ0101
Rev.1.01
Feb 21, 2022
DESCRIPTION
The PS2561D-1 is an optically coupled isolator containing a GaAs light emitting diode and an NPN silicon
phototransistor.
The PS2561D-1 is in a plastic DIP (Dual In-line Package) and the PS2561DL-1 is lead bending type (Gullwing) for surface mount.
The PS2561DL1-1 is lead bending type for long creepage distance.
The PS2561DL2-1 is lead bending type for long creepage distance (Gull-wing) for surface mount.
FEATURES
•
•
•
•
•
•
•
•
•
Operating ambient temperature: 110 °C
High isolation voltage (BV = 5 000 Vr.m.s.)
High collector to emitter voltage (VCEO = 80 V)
High current transfer ratio (CTR = 160 % TYP.)
High-speed switching (tr = 3 μs TYP., tf = 5 μs TYP.)
Ordering number of taping product: PS2561DL-1-F3 : 2 000 pcs/reel
: PS2561DL2-1-F3 : 2 000 pcs/reel
Pb-Free product
Safety standards
•
UL approved: UL1577, Double protection
•
CSA approved: CAN/CSA-C22.2 No. 62368-1, Reinforced insulation
•
BSI approved: BS EN 62368-1, Reinforced insulation
•
SEMKO approved: EN 62368-1, IEC 62368-1, Reinforced insulation
•
NEMKO approved: EN 62368-1, Reinforced insulation
•
FIMKO approved: EN 62368-1, Reinforced insulation
•
DEMKO approved: EN 62368-1, Reinforced insulation
•
CQC approved: GB8898, GB4943.1, Reinforced insulation
•
VDE approved: DIN EN 60747-5-5 (Option)
PIN CONNECTION
(Top View)
4 3
1. Anode
2. Cathode
3. Emitter
4. Collector
1 2
APPLICATIONS
•
•
•
•
Power supply
Telephone/FAX.
FA/OA equipment
Programmable logic controllers
R08DS0181EJ0101 Rev.1.01
Feb 21, 2022
Page 1 of 17
PS2561D-1, PS2561DL-1, PS2561DL1-1, PS2561DL2-1e
PACKAGE DIMENSIONS (UNIT: mm)
DIP Type
Long Creepage Distance
PS25xxL1−1
PS25xx−1
4.6±0.35
1 2
3
1
2
0 to 15°
+0.1
0.25−0.05
0.50±0.10
0.25M
1.25±0.15
10.16
3.5±0.3
3.15±0.35
3.85±0.4
7.62
3.5±0.3
3.2±0.4 4.15±0.4
4
6.5±0.5
6.5±0.5
4.6±0.35
4 3
0.50±0.1
0.25M
1.25±0.15
0.25+0.1
−0.05
2.54
0 to 15°
2.54
Lead Bending Type
Long Creepage Distance (Gull-Wing)
PS25xxL2−1
PS25xxL−1
4.6±0.35
4
3
1
2
2.54
0.15
1.25±0.15
0.25M
0.9±0.25
9.60±0.4
1.25±0.15
0.25M
0.25±0.2
0.1+0.1
−0.05
+0.1
3.5±0.3
3.5±0.3
2
0.25−0.05
1
0.25+0.1
−0.05
6.5±0.5
6.5±0.5
4.6±0.35
4 3
0.9±0.25
10.16
2.54
11.8+0.2
−0.5
0.15
Weight ( 4-pin DIP)：0.26 g (typ.)
PHOTOCOUPLER CONSTRUCTION
Parameter
PS2561D-1, PS2561DL-1
PS2561DL1-1, PS2561DL2-1
Air Distance (MIN.)
7 mm
8 mm
Creepage Distance (MIN.)
7 mm
8 mm
0.4 mm
0.4 mm
Isolation Distance (MIN.)
R08DS0181EJ0101 Rev.1.01
Feb 21, 2022
Page 2 of 17
PS2561D-1, PS2561DL-1, PS2561DL1-1, PS2561DL2-1e
MARKING EXAMPLE
No. 1 pin
Mark
R
2561D
NR031
Company Initial
Type Number
Assembly Lot
N R 0 31
Week Assembled
Year Assembled (Last 1 Digit)
In-house Code
CTR Rank Code
Made in Japan Made in Taiwan
Pb-Free and
Halogen Free
R
Y
ORDERING INFORMATION
Order Number *1
Part Number
PS2561D-1
PS2561D-1Y-A
PS2561DL-1
PS2561DL-1Y-A
Solder Plating
Specification
Pb-Free and
Safety Standard
Approval
Packing Style
Standard products
Magazine case 100 pcs
Halogen Free
(UL, CSA, BSI,
SEMKO, NEMKO,
Application
Part Number *2
PS2561D-1
PS2561DL-1
PS2561DL1-1
PS2561DL1-1Y-A
PS2561DL2-1
PS2561DL2-1Y-A
PS2561DL-1-F3
PS2561DL-1Y-F3-A
Embossed Tape 2 000
pcs/reel
PS2561DL-1
PS2561DL2-1-F3
PS2561DL2-1Y-F3-A
Embossed Tape 2 000
pcs/reel
PS2561DL2-1
PS2561D-1-V
PS2561D-1Y-V-A
Magazine case 100 pcs
PS2561DL-1-V
FIMKO, DEMKO,
CQC approved)
UL, CSA, BSI,
SEMKO, NEMKO,
PS2561DL-1Y-V-A
FIMKO, DEMKO,
PS2561DL1-1-V
PS2561DL1-1Y-V-A
PS2561DL2-1-V
PS2561DL2-1Y-V-A
PS2561DL-1-V-F3
PS2561DL-1Y-V-F3-A
Embossed Tape 2 000
pcs/reel
PS2561DL2-1-V-F3
PS2561DL2-1Y-V-F3-A
Embossed Tape 2 000
pcs/reel
CQC,
DIN EN 60747-5-5
approved
PS2561DL1-1
PS2561DL2-1
PS2561D-1
PS2561DL-1
PS2561DL1-1
PS2561DL2-1
PS2561DL-1
PS2561DL2-1
Notes: *1. If requested by Order Number in the table, all CTR rank (CTR = 50-400 % (@ IF = 5 mA, VCE = 5 V) &
CTR = 10 % and larger (@ IF = 1 mA, VCE = 5 V)) products will be shipped.
When specifying CTR rank, please add “/CTR rank” after Order Number.
ex. L rank : PS2561D-1Y-A/L
Notes: *2. For the application of the Safety Standard, following part number should be used.
R08DS0181EJ0101 Rev.1.01
Feb 21, 2022
Page 3 of 17
PS2561D-1, PS2561DL-1, PS2561DL1-1, PS2561DL2-1e
ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, unless otherwise specified)
Parameter
Symbol
Ratings
Unit
Reverse Voltage
VR
6
V
Forward Current (DC)
IF
40
mA
∆PD/°C
1.5
mW/°C
Power Dissipation
PD
150
mW
Peak Forward Current*1
IFP
1
A
Collector to Emitter Voltage
VCEO
80
V
Emitter to Collector Voltage
VECO
7
V
IC
50
mA
∆PC/°C
1.5
mW/°C
PC
150
mW
Isolation Voltage*2
BV
5 000
Vr.m.s.
Operating Ambient Temperature
TA
–55 to +110
°C
Storage Temperature
Tstg
–55 to +150
°C
Diode
Power Dissipation Derating
Transistor
Collector Current
Power Dissipation Derating
Power Dissipation
Note:
*1. PW = 100 μs, Duty Cycle = 1 %
*2. AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and output.
Pins 1-2 shorted together, 3-4 shorted together.
R08DS0181EJ0101 Rev.1.01
Feb 21, 2022
Page 4 of 17
PS2561D-1, PS2561DL-1, PS2561DL1-1, PS2561DL2-1e
ELECTRICAL CHARACTERISTICS (TA = 25 °C)
Parameter
Diode
Symbol
Conditions
Forward Voltage
VF
IF = 10 mA
Reverse Current
IR
VR = 5 V
Terminal Capacitance
Ct
V = 0 V, f = 1.0 MHz
MIN.
TYP.
MAX.
Unit
1.2
1.4
V
5
µA
10
Transistor
Collector to Emitter
Dark Current
ICEO
VCE = 48 V, IF = 0 mA
Coupled
Current Transfer Ratio
(IC/IF)*1
CTR
IF = 5 mA, VCE = 5 V
50
160
IF = 1 mA, VCE = 5 V
10
80
Collector Saturation
Voltage
VCE (sat)
Isolation Resistance
RI-O
VI-O = 1.0 kVDC
Isolation Capacitance
CI-O
V = 0 V, f = 1.0 MHz
Rise
Time*2
tr
Fall Time*2
Note:
tf
pF
IF = 10 mA, IC = 2 mA
nA
400
%
0.3
V
Ω
1011
VCC = 10 V, IC = 2 mA,
RL = 100 Ω
100
0.5
pF
3
µs
5
*1. CTR rank
CTR Rank
CTR (%)
Conditions
80 to 160
IF = 5 mA, VCE = 5 V
16 and larger
IF = 1 mA, VCE = 5 V
100 to 200
IF = 5 mA, VCE = 5 V
20 and larger
IF = 1 mA, VCE = 5 V
130 to 260
IF = 5 mA, VCE = 5 V
26 and larger
IF = 1 mA, VCE = 5 V
200 to 400
IF = 5 mA, VCE = 5 V
40 and larger
IF = 1 mA, VCE = 5 V
50 to 400
IF = 5 mA, VCE = 5 V
10 and larger
IF = 1 mA, VCE = 5 V
H
Q
W
L
N
*2. Test Circuit for Switching Time
Pulse Input
VCC
PW = 100 μs
Duty cycle = 1/10
IF
ton
IF
IF Monitor
td
VOUT
50 Ω
toff
ts
RL = 100 Ω
90%
VO
10%
tr
R08DS0181EJ0101 Rev.1.01
Feb 21, 2022
tf
Page 5 of 17
PS2561D-1, PS2561DL-1, PS2561DL1-1, PS2561DL2-1e
TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise specified)
DIODE POWER DISSIPATION vs.
AMBIENT TEMPERATURE
TRANSISTOR POWER DISSIPATION
vs. AMBIENT TEMPERATURE
Transistor Power Dissipation PC (mW)
Diode Power Dissipation PD (mW)
150
100
1.5 mW/°C
50
0
25
50
100110 125
75
100
1.5 mW/°C
50
0
150
25
50
100110 125
75
Ambient Temperature TA (°C)
FORWARD CURRENT vs.
FORWARD VOLTAGE
COLLECTOR CURRENT vs.
COLLECTOR TO EMITTER VOLTAGE
25
50
Collector Current IC (mA)
TA = +100°C
+60°C
+25°C
10
5
0°C
−25°C
−55°C
1
0.5
IF = 10 mA
20
15
IF = 5 mA
10
5
IF = 2 mA
IF = 1 mA
0.1
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
0
1.5
2
6
8
10
COLLECTOR CURRENT vs.
COLLECTOR SATURATION VOLTAGE
COLLECTOR TO EMITTER DARK
CURRENT vs. AMBIENT TEMPERATURE
10
IF = 10 mA
Collector Current IC (mA)
10 000
VCE = 48 V
24 V
10 V
5V
1 000
4
Collector to Emitter Voltage VCE (V)
Forward Voltage VF (V)
Collector to Emitter Dark Current ICEO (nA)
150
Ambient Temperature TA (°C)
100
Forward Current IF (mA)
150
100
10
IF = 5 mA
IF = 2 mA
1
IF = 1 mA
1
− 50
−25
0
25
50
75
100 110
Ambient Temperature TA (°C)
0.1
0
0.2
0.4
0.6
0.8
1.0
Collector Saturation Voltage VCE (sat) (V)
Remark The graphs indicate nominal characteristics.
R08DS0181EJ0101 Rev.1.01
Feb 21, 2022
Page 6 of 17
PS2561D-1, PS2561DL-1, PS2561DL1-1, PS2561DL2-1e
CURRENT TRANSFER RATIO vs.
FORWARD CURRENT
400
1.4
Current Transfer Ratio CTR (%)
Normalized Current Transfer Ratio CTR
NORMALIZED CURRENT TRANSFER
RATIO vs. AMBIENT TEMPERATURE
1.2
1.0
0.8
0.6
Normalized to 1.0
at TA = 25°C,
IF = 5 mA, VCE = 5 V
CTR:130%
CTR:270%
0.4
0.2
0
−50
−25
0
25
50
75
VCE = 5 V,
350 n = 5
300
250
150
100
50
0
0.01
100
Ambient Temperature TA (°C)
0.1
1
10
100
Forward Current IF (mA)
SWITCHING TIME vs.
LOAD RESISTANCE
SWITCHING TIME vs.
LOAD RESISTANCE
1 000
100
IC = 2 mA, VCC = 10 V,
CTR = 216%
IF = 5 mA, VCC = 5 V,
CTR = 216%
tf
tr
Switching Time t (μs)
Switching Time t (μs)
Sample A
B
C
D
E
200
10
td
ts
1
0.1
10
100
1 000
10 000
Load Resistance RL (Ω)
tf
100
ts
10
1
1
tr
td
10
100
Load Resistance RL (kΩ)
FREQUENCY RESPONSE
5
Normalized Gain GV
0
−5
100 Ω
−10
300 Ω
−15
−20
RL = 1 kΩ
IF = 5 mA,
VCE = 5 V
−25
0.1
1
10
100
1 000
Frequency f (kHz)
Remark The graphs indicate nominal characteristics.
R08DS0181EJ0101 Rev.1.01
Feb 21, 2022
Page 7 of 17
PS2561D-1, PS2561DL-1, PS2561DL1-1, PS2561DL2-1e
TAPING SPECIFICATIONS (UNIT: mm)
Taping Direction
PS25xxL−1-F3
Direction of feed
⌀1.55±0.1
10.3±0.1
7.5±0.1
⌀1.5+0.1
−0
16.0±0.3
2.0±0.1
4.0±0.1
1.75±0.1
Outline and Dimensions (Tape)
4.0±0.1
5.3±0.1
8.0±0.1
0.4
Outline and Dimensions (Reel)
⌀21.0±0.8
⌀100±1.0
R1.0
⌀330±2.0
2.0±0.5
⌀13.0±0.2
17.5±1.0
21.5±1.0
Packing: 2 000 pcs/reel
R08DS0181EJ0101 Rev.1.01
Feb 21, 2022
Page 8 of 17
PS2561D-1, PS2561DL-1, PS2561DL1-1, PS2561DL2-1e
TAPING SPECIFICATIONS (UNIT: mm)
Taping Direction
PS25xxL2−1-F3
Direction of feed
⌀2.05±0.1
12.5±0.1
11.5±0.1
⌀1.5+0.1
−0
24.0±0.3
2.0±0.1
4.0±0.1
1.75±0.1
Outline and Dimensions (Tape)
4.0±0.1
5.3±0.1
0.4
8.0±0.1
Outline and Dimensions (Reel)
2.0±0.5
⌀21.0±0.8
⌀100±1.0
R1.0
⌀330±2.0
⌀13.0±0.2
25.5±1.0
29.5±1.0
Packing: 2 000 pcs/reel
R08DS0181EJ0101 Rev.1.01
Feb 21, 2022
Page 9 of 17
PS2561D-1, PS2561DL-1, PS2561DL1-1, PS2561DL2-1e
RECOMMENDED MOUNT PAD DIMENSIONS (UNIT: mm)
B
C
D
A
Part Number
Lead Bending
A
B
C
D
PS25xxL
lead bending type (Gull-wing)
for surface mount
8.2
2.54
1.7
2.2
PS25xxL2
lead bending type (Gull-wing)
for long creepage distance (surface mount)
10.2
2.54
1.7
2.2
Remark All dimensions in this figure must be evaluated before use.
R08DS0181EJ0101 Rev.1.01
Feb 21, 2022
Page 10 of 17
PS2561D-1, PS2561DL-1, PS2561DL1-1, PS2561DL2-1e
NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
• Peak reflow temperature
• Time of peak reflow temperature
• Time of temperature higher than 220 °C
• Time to preheat temperature from 120 to 180 °C
• Number of reflows
• Flux
260 °C or below (package surface temperature)
10 seconds or less
60 seconds or less
120 ± 30 s
Three
Rosin flux containing small amount of chlorine
(The flux with a maximum chlorine content of
0.2 Wt% is recommended.)
Package Surface Temperature T (°C)
Recommended Temperature Profile of Infrared Reflow
(heating)
to 10 s
260°C MAX.
220°C
to 60 s
180°C
120°C
120±30 s
(preheating)
Time (s)
(2) Wave soldering
• Temperature
• Time
• Preheating conditions
• Number of times
• Flux
260 °C or below (molten solder temperature)
10 seconds or less
120 °C or below (package surface temperature)
One (Allowed to be dipped in solder including plastic mold portion.)
Rosin flux containing small amount of chlorine (The flux with a maximum
chlorine content of 0.2 Wt% is recommended.)
(3) Soldering by Soldering Iron
• Peak Temperature (lead part temperature) 350 °C or below
• Time (each pins)
3 seconds or less
• Flux
Rosin flux containing small amount of chlorine
(The flux with a maximum chlorine content of 0.2 Wt% is recommended.)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead
(b) Please be sure that the temperature of the package would not be heated over 100 °C
(4) Cautions
• Flux Cleaning
Avoid cleaning with Freon based or halogen-based (chlorinated etc.) solvents.
• Do not use fixing agents or coatings containing halogen-based substances.
R08DS0181EJ0101 Rev.1.01
Feb 21, 2022
Page 11 of 17
PS2561D-1, PS2561DL-1, PS2561DL1-1, PS2561DL2-1e
2. Cautions regarding noise
Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between
collector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the
absolute maximum ratings.
3. Measurement conditions of current transfer ratios (CTR), which differ according to photocoupler
Check the setting values before use, since the forward current conditions at CTR measurement differ
according to product.
When using products other than at the specified forward current, the characteristics curves may differ from
the standard curves due to CTR value variations or the like. Therefore, check the characteristics under the
actual operating conditions and thoroughly take variations or the like into consideration before use.
USAGE CAUTIONS
1.
2.
3.
4.
Protect against static electricity when handling.
Avoid storage at a high temperature and high humidity.
Avoid cleaning with Freon based or halogen-based (chlorinated etc.) solvents.
Do not use fixing agents or coatings containing halogen-based substances.
R08DS0181EJ0101 Rev.1.01
Feb 21, 2022
Page 12 of 17
PS2561D-1, PS2561DL-1, PS2561DL1-1, PS2561DL2-1e
SPECIFICATION OF VDE MARKS LICENSE DOCUMENT (1/2)
(PS2561D-1, PS2561DL-1)
Parameter
Symbol
Climatic test class (IEC 60068-1/DIN EN 60068-1)
Rating
Unit
55/110/21
Dielectric strength
maximum operating isolation voltage
Test voltage (partial discharge test, procedure a for type test and
random test)
Upr = 1.6 × UIORM, Pd < 5 pC
Test voltage (partial discharge test, procedure b for all devices)
Upr = 1.875 × UIORM, Pd < 5 pC
Highest permissible overvoltage
UIORM
Upr
890
1 424
Vpeak
Vpeak
Upr
1 669
Vpeak
UIOTM
8 000
Vpeak
Degree of pollution (IEC 60664-1/DIN EN 60664-1 (VDE 0110-1)
Comparative tracking index (IEC 60112/DIN EN 60112 (VDE 0303-11))
2
CTI
Material group (IEC 60664-1/DIN EN 60664-1 (VDE 0110-1))
175
III a
Storage temperature range
Tstg
–55 to +150
°C
Operating temperature range
TA
–55 to +110
°C
Ris MIN.
Ris MIN.
1012
1011
Ω
Ω
Tsi
Isi
Psi
175
400
700
°C
mA
mW
Ris MIN.
109
Ω
Isolation resistance, minimum value
VIO = 500 V dc at TA = 25 °C
VIO = 500 V dc at TA MAX. at least 100 °C
Safety maximum ratings (maximum permissible in case of fault, see
thermal derating curve)
Package temperature
Current (input current IF, Psi = 0)
Power (output or total power dissipation)
Isolation resistance
VIO = 500 V dc at TA = Tsi
Dependence of maximum safety ratings with package temperature
Total Power Dissipation Psi (mW)
Input Current Isi (mA)
1000
900
800
700
600
Psi: Total Power Dissipation
500
400
300
Isi: Input Current
200
100
0
0
25
50
75
100
125
150
175
200
Package temp Tsi (°C)
R08DS0181EJ0101 Rev.1.01
Feb 21, 2022
Page 13 of 17
PS2561D-1, PS2561DL-1, PS2561DL1-1, PS2561DL2-1e
SPECIFICATION OF VDE MARKS LICENSE DOCUMENT (2/2)
(PS2561DL1-1, PS2561DL2-1)
Parameter
Symbol
Climatic test class (IEC 60068-1/DIN EN 60068-1)
Rating
Unit
55/110/21
Dielectric strength
maximum operating isolation voltage
Test voltage (partial discharge test, procedure a for type test and
random test)
Upr = 1.6 × UIORM, Pd < 5 pC
Test voltage (partial discharge test, procedure b for all devices)
Upr = 1.875 × UIORM, Pd < 5 pC
Highest permissible overvoltage
UIORM
Upr
1 130
1 808
Vpeak
Vpeak
Upr
2 119
Vpeak
UIOTM
8 000
Vpeak
Degree of pollution (IEC 60664-1/DIN EN 60664-1 (VDE 0110-1)
Comparative tracking index (IEC 60112/DIN EN 60112 (VDE 0303-11))
2
CTI
Material group (IEC 60664-1/DIN EN 60664-1 (VDE 0110-1))
175
III a
Storage temperature range
Tstg
–55 to +150
°C
Operating temperature range
TA
–55 to +110
°C
Ris MIN.
Ris MIN.
1012
1011
Ω
Ω
Tsi
Isi
Psi
175
400
700
°C
mA
mW
Ris MIN.
109
Ω
Isolation resistance, minimum value
VIO = 500 V dc at TA = 25 °C
VIO = 500 V dc at TA MAX. at least 100 °C
Safety maximum ratings (maximum permissible in case of fault, see
thermal derating curve)
Package temperature
Current (input current IF, Psi = 0)
Power (output or total power dissipation)
Isolation resistance
VIO = 500 V dc at TA = Tsi
Dependence of maximum safety ratings with package temperature
Total Power Dissipation Psi (mW)
Input Current Isi (mA)
1000
900
800
700
600
Psi: Total Power Dissipation
500
400
300
Isi: Input Current
200
100
0
0
25
50
75
100
125
150
175
200
Package temp Tsi (°C)
R08DS0181EJ0101 Rev.1.01
Feb 21, 2022
Page 14 of 17
PS2561D-1, PS2561DL-1, PS2561DL1-1, PS2561DL2-1e
Method a) Destructive Test, Type and Sample Test (PS2561D-1, PS2561DL-1)
UIOTM = 8000 V
V
Upr = 1424 V
UIORM = 890 V
t3
t1
tini
t2
tm
t4
t
ttest
t1, t2 = 1 to 10 sec
t3, t4 = 1 sec
tm(PARTIAL DISCHARGE) = 10 sec
ttest = 12 sec
tini = 60 sec
Method b) Non-destructive Test, 100 % Production Test (PS2561D-1, PS2561DL-1)
Upr = 1669 V
V
UIORM = 890 V
ttest
t3
tm
t
t4
t3, t4 = 0.1 sec
tm(PARTIAL DISCHARGE) = 1.0 sec
ttest = 1.2 sec
R08DS0181EJ0101 Rev.1.01
Feb 21, 2022
Page 15 of 17
PS2561D-1, PS2561DL-1, PS2561DL1-1, PS2561DL2-1e
Method a) Destructive Test, Type and Sample Test (PS2561DL1-1, PS2561DL2-1)
UIOTM = 8000 V
V
Upr = 1808 V
UIORM = 1130 V
t3
t1
tini
t2
tm
t4
t
ttest
t1, t2 = 1 to 10 sec
t3, t4 = 1 sec
tm(PARTIAL DISCHARGE) = 10 sec
ttest = 12 sec
tini = 60 sec
Method b) Non-destructive Test, 100% Production Test (PS2561DL1-1, PS2561DL2-1)
Upr = 2119 V
V
UIORM = 1130 V
ttest
t3
tm
t
t4
t3, t4 = 0.1 sec
tm(PARTIAL DISCHARGE) = 1.0 sec
ttest = 1.2 sec
R08DS0181EJ0101 Rev.1.01
Feb 21, 2022
Page 16 of 17
PS2561D-1, PS2561DL-1, PS2561DL1-1, PS2561DL2-1e
Caution
GaAs Products
This product uses gallium arsenide (GaAs).
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe
the following points.
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or i any way allow it to enter the mouth.
All trademarks and registered trademarks are the property of their respective owners.
R08DS0181EJ0101 Rev.1.01
Feb 21, 2022
Page 17 of 17
Notice
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products
and application examples. You are fully responsible for the incorporation or any other use of the circuits, software, and information in the design of your
product or system. Renesas Electronics disclaims any and all liability for any losses and damages incurred by you or third parties arising from the use
of these circuits, software, or information.
Renesas Electronics hereby expressly disclaims any warranties against and liability for infringement or any other claims involving patents, copyrights,
or other intellectual property rights of third parties, by or arising from the use of Renesas Electronics products or technical information described in this
document, including but not limited to, the product data, drawings, charts, programs, algorithms, and application examples.
No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics
or others.
You shall be responsible for determining what licenses are required from any third parties, and obtaining such licenses for the lawful import, export,
manufacture, sales, utilization, distribution or other disposal of any products incorporating Renesas Electronics products, if required.
You shall not alter, modify, copy, or reverse engineer any Renesas Electronics product, whether in whole or in part. Renesas Electronics disclaims any
and all liability for any losses or damages incurred by you or third parties arising from such alteration, modification, copying or reverse engineering.
Renesas Electronics products are classified according to the following two quality grades: “Standard” and “High Quality”. The intended applications for
each Renesas Electronics product depends on the product’s quality grade, as indicated below.
"Standard": Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home
electronic appliances; machine tools; personal electronic equipment; industrial robots; etc.
"High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control (traffic lights); large-scale communication equipment; key
financial terminal systems; safety control equipment; etc.
Unless expressly designated as a high reliability product or a product for harsh environments in a Renesas Electronics data sheet or other Renesas
Electronics document, Renesas Electronics products are not intended or authorized for use in products or systems that may pose a direct threat to
human life or bodily injury (artificial life support devices or systems; surgical implantations; etc.), or may cause serious property damage (space
system; undersea repeaters; nuclear power control systems; aircraft control systems; key plant systems; military equipment; etc.). Renesas Electronics
disclaims any and all liability for any damages or losses incurred by you or any third parties arising from the use of any Renesas Electronics product
that is inconsistent with any Renesas Electronics data sheet, user’s manual or other Renesas Electronics document.
No semiconductor product is absolutely secure. Notwithstanding any security measures or features that may be implemented in Renesas Electronics
hardware or software products, Renesas Electronics shall have absolutely no liability arising out of any vulnerability or security breach, including but
not limited to any unauthorized access to or use of a Renesas Electronics product or a system that uses a Renesas Electronics product. RENESAS
ELECTRONICS DOES NOT WARRANT OR GUARANTEE THAT RENESAS ELECTRONICS PRODUCTS, OR ANY SYSTEMS CREATED USING
RENESAS ELECTRONICS PRODUCTS WILL BE INVULNERABLE OR FREE FROM CORRUPTION, ATTACK, VIRUSES, INTERFERENCE,
HACKING, DATA LOSS OR THEFT, OR OTHER SECURITY INTRUSION (“Vulnerability Issues”). RENESAS ELECTRONICS DISCLAIMS ANY AND
ALL RESPONSIBILITY OR LIABILITY ARISING FROM OR RELATED TO ANY VULNERABILITY ISSUES. FURTHERMORE, TO THE EXTENT
PERMITTED BY APPLICABLE LAW, RENESAS ELECTRONICS DISCLAIMS ANY AND ALL WARRANTIES, EXPRESS OR IMPLIED, WITH
RESPECT TO THIS DOCUMENT AND ANY RELATED OR ACCOMPANYING SOFTWARE OR HARDWARE, INCLUDING BUT NOT LIMITED TO
THE IMPLIED WARRANTIES OF MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE.
When using Renesas Electronics products, refer to the latest product information (data sheets, user’s manuals, application notes, “General Notes for
Handling and Using Semiconductor Devices” in the reliability handbook, etc.), and ensure that usage conditions are within the ranges specified by
Renesas Electronics with respect to maximum ratings, operating power supply voltage range, heat dissipation characteristics, installation, etc. Renesas
Electronics disclaims any and all liability for any malfunctions, failure or accident arising out of the use of Renesas Electronics products outside of such
specified ranges.
Although Renesas Electronics endeavors to improve the quality and reliability of Renesas Electronics products, semiconductor products have specific
characteristics, such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Unless designated as a high reliability
product or a product for harsh environments in a Renesas Electronics data sheet or other Renesas Electronics document, Renesas Electronics
products are not subject to radiation resistance design. You are responsible for implementing safety measures to guard against the possibility of bodily
injury, injury or damage caused by fire, and/or danger to the public in the event of a failure or malfunction of Renesas Electronics products, such as
safety design for hardware and software, including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for
aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult and impractical, you are
responsible for evaluating the safety of the final products or systems manufactured by you.
Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas
Electronics product. You are responsible for carefully and sufficiently investigating applicable laws and regulations that regulate the inclusion or use of
controlled substances, including without limitation, the EU RoHS Directive, and using Renesas Electronics products in compliance with all these
applicable laws and regulations. Renesas Electronics disclaims any and all liability for damages or losses occurring as a result of your noncompliance
with applicable laws and regulations.
Renesas Electronics products and technologies shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is
prohibited under any applicable domestic or foreign laws or regulations. You shall comply with any applicable export control laws and regulations
promulgated and administered by the governments of any countries asserting jurisdiction over the parties or transactions.
It is the responsibility of the buyer or distributor of Renesas Electronics products, or any other party who distributes, disposes of, or otherwise sells or
transfers the product to a third party, to notify such third party in advance of the contents and conditions set forth in this document.
This document shall not be reprinted, reproduced or duplicated in any form, in whole or in part, without prior written consent of Renesas Electronics.
Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas
Electronics products.
(Note1)
(Note2)
“Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its directly or indirectly controlled
subsidiaries.
“Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.
(Rev.5.0-1 October 2020)
Corporate Headquarters
Contact information
TOYOSU FORESIA, 3-2-24 Toyosu,
Koto-ku, Tokyo 135-0061, Japan
For further information on a product, technology, the most up-to-date
version of a document, or your nearest sales office, please visit:
www.renesas.com/contact/.
www.renesas.com
Trademarks
Renesas and the Renesas logo are trademarks of Renesas Electronics
Corporation. All trademarks and registered trademarks are the property
of their respective owners.
© 2021 Renesas Electronics Corporation. All rights reserved.
