Data Sheet
PS2805-1, PS2805-4
HIGH ISOLATION VOLTAGE AC INPUT RESPONSE TYPE SSOP PHOTOCOUPLER
R08DS0095EJ0400
Rev.4.00
Jan 23, 2013
DESCRIPTION
The PS2805-1 and PS2805-4 are optically coupled isolators containing GaAs light emitting diodes and an NPN silicon
phototransistor in a plastic SSOP for high density applications.
This package has shield effect to cut off ambient light.
FEATURES
•
•
•
•
•
•
•
•
High isolation voltage (BV = 2 500 Vr.m.s.)
Small and thin package (4,16-pin SSOP, Pin pitch 1.27 mm)
High collector to emitter voltage (VCEO = 80 V)
AC input response
High-speed switching (tr = 3 μs TYP., tf = 5 μs TYP.)
Ordering number of tape product: PS2805-1-F3, PS2805-4-F3
Pb-Free product
Safety standards
• UL approved: No. E72422
• BSI approved (BS EN 60065, BS EN 60950)
• CSA approved: No. CA 101391 (CA5A, CAN/CSA-C22.2 60065, 60950)
• DIN EN 60747-5-5 (VDE 0884-5) approved (Option)
PIN CONNECTION
(Top View)
PS2805-1
4 3
1 2
1. Anode, Cathode
2. Cathode, Anode
3. Emitter
4. Collector
PS2805-4
APPLICATIONS
16 15 14 13 12 11 10 9
• Programmable logic controllers
• Measuring instruments
• Hybrid IC
1 2 3 4 5 6 7 8
1. 3. 5. 7.
2. 4. 6. 8.
9. 11. 13. 15.
10. 12. 14. 16.
Anode, Cathode
Cathode, Anode
Emitter
Collector
The mark shows major revised points.
The revised points can be easily searched by copying an "" in the PDF file and specifying it in the "Find what:" field.
R08DS0095EJ0400 Rev.4.00
Jan 23, 2013
Page 1 of 14
PS2805-1, PS2805-4e
PACKAGE DIMENSIONS (UNIT: mm)
PS2805-1
PS2805-4
2.7±0.3
7.0±0.3
4.4
4.4
0.1±0.1
0.5±0.3
1.27
0.4±0.1
0.12 M
0.15+0.10
–0.05
7.0±0.3
2.0+0.3
–0.2
0.15+0.10
–0.05
2.0±0.1
0.1±0.1
10.3±0.3
0.40+0.10
–0.05
0.12 M
1.27
0.5±0.3
PHOTOCOUPLER CONSTRUCTION
Parameter
Unit (MIN.)
Air Distance
4.5 mm
Outer Creepage Distance
Inner Creepage Distance
Isolation Distance
4.5 mm
2.5 mm
0.1 mm
R08DS0095EJ0400 Rev.4.00
Jan 23, 2013
Page 2 of 14
PS2805-1, PS2805-4e
MARKING EXAMPLE
PS2805-1
Company initial
Made in Taiwan
R5
301
Last 1 number of type
No. : 5
Assembly Lot
301
Week Assembled
Year Assembled (Last 1 digit)
Made in Japan
R5
301
"
" (Square)
:Made in Japan
PS2805-4
Country Assembled
R
PS2805-4
NL301
Assembly Lot
No. 1 pin
Mark
N L 3 01
Week Assembled
Year Assembled
(Last 1 Digit)
In-house Code
(L: Pb-Free)
Rank Code
R08DS0095EJ0400 Rev.4.00
Jan 23, 2013
Page 3 of 14
PS2805-1, PS2805-4e
ORDERING INFORMATION
Part Number
Order Number
PS2805-1-F3
PS2805-1-F3-A
Solder Plating
Specification etc.
Packing Style
Embossed Tape 3 500 pcs/reel
Pb-Free
Safety Standard
Approval
Application
*1
Part Number
Standard products
PS2805-1
(UL, BSI, CSA
approved)
PS2805-1-V-F3
PS2805-1-V-F3-A
Embossed Tape 3 500 pcs/reel
DIN EN 60747-5-5
(VDE 0884-5)
Approved (Option)
PS2805-4-F3
PS2805-4-F3-A
Embossed Tape 2 500 pcs/reel
Standard products
PS2805-4
(UL, BSI, CSA
approved)
PS2805-4-V-F3
PS2805-4-V-F3-A
Embossed Tape 2 500 pcs/reel
DIN EN 60747-5-5
(VDE 0884-5)
Approved (Option)
Note: *1. For the application of the Safety Standard, following part number should be used.
ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified)
Diode
Parameter
Symbol
Forward Current (DC)
IF
Power Dissipation Derating
Power Dissipation
*1
Ratings
PS2805-1
PS2805-4
± 50
Unit
mA/ch
ΔPD/°C
0.6
0.8
mW/°C
PD
60
80
mW/ch
IFP
±1
A/ch
Collector to Emitter Voltage
VCEO
80
V
Emitter to Collector Voltage
VECO
6
V
IC
50
mA/ch
ΔPC/°C
1.2
mW/°C
PC
120
mW/ch
BV
2 500
Vr.m.s.
Operating Ambient Temperature
TA
−55 to +100
°C
Storage Temperature
Tstg
−55 to +150
°C
Peak Forward Current
Transistor
Collector Current
Power Dissipation Derating
Power Dissipation
Isolation Voltage
Notes:
*2
*1. PW = 100 μs, Duty Cycle = 1%
*2. AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output.
Pins 1-2 shorted together, 3-4 shorted together (PS2805-1).
Pins 1-8 shorted together, 9-16 shorted together (PS2805-4).
R08DS0095EJ0400 Rev.4.00
Jan 23, 2013
Page 4 of 14
PS2805-1, PS2805-4e
ELECTRICAL CHARACTERISTICS (TA = 25°C)
Parameter
Diode
TYP.
MAX.
Unit
Forward Voltage
Symbol
VF
IF = ±5 mA
Conditions
MIN.
1.1
1.4
V
Terminal Capacitance
30
Ct
V = 0 V, f = 1.0 MHz
Transistor
Collector to Emitter
Dark Current
ICEO
VCE = 80 V, IF = 0 mA
Coupled
Current Transfer Ratio
*1
(IC/IF)
CTR
IF = ±5 mA, VCE = 5 V
80
CTR1/
CTR2
IF = 5 mA, VCE = 5 V
0.3
Collector Saturation
Voltage
VCE (sat)
IF = ±10 mA, IC = 2 mA
Isolation Resistance
RI-O
VI-O = 1.0 kVDC
Isolation Capacitance
CI-O
V = 0 V, f = 1.0 MHz
*1
CTR Ratio
Rise Time
Fall Time
Notes:
*2
100
nA
600
%
3.0
0.3
10
11
V
Ω
VCC = 5 V, IC = 2 mA, RL = 100 Ω
tr
*2
1.0
pF
0.4
pF
3
μs
tf
5
Turn-on Time
*2
ton
6
Turn-off Time
*2
toff
5
*1. CTR1 = IC1/IF1, CTR2 = IC2/IF2
IC1
IF1
VCE
IC2
IF2
*2. Test circuit for switching time
Pulse Input
IF
VCC
Input
PW = 100 μ s
Duty Cycle = 1/10
ton
td
50 Ω
toff
ts
VOUT
RL = 100 Ω
90%
Output
10%
tr
R08DS0095EJ0400 Rev.4.00
Jan 23, 2013
tf
Page 5 of 14
PS2805-1, PS2805-4e
TYPICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified)
TRANSISTOR POWER DISSIPATION
vs. AMBIENT TEMPERATURE
DIODE POWER DISSIPATION vs.
AMBIENT TEMPERATURE
60
0.8 mW/˚C
PS2805-1
40
0.6 mW/˚C
20
0
100
50
Forward Current IF (mA)
Transistor Power Dissipation PC (mW)
PS2805-4
80
25
50
75
100
PS2805-1
PS2805-4
80
60
1.2 mW/˚C
40
20
25
50
75
100
Ambient Temperature TA (˚C)
Ambient Temperature TA (˚C)
FORWARD CURRENT vs.
FORWARD VOLTAGE
FORWARD CURRENT vs.
FORWARD VOLTAGE
80
TA = +100˚C
+60˚C
+25˚C
60
10
5
0˚C
–25˚C
–55˚C
1
0.5
40
20
0
–20
–40
–60
0.1
0.7
120
0
100
Forward Current IF (mA)
Diode Power Dissipation PD (mW)
100
0.8
0.9
1.0
1.1
1.2
1.3
1.4
–80
1.5
–1.5
–1.0
–0.5
0
0.5
1.0
1.5
Forward Voltage VF (V)
Forward Voltage VF (V)
COLLECTOR TO EMITTER DARK
CURRENT vs. AMBIENT TEMPERATURE
COLLECTOR CURRENT vs.
COLLECTOR SATURATION VOLTAGE
40
10 000
VCE = 80 V
40 V
24 V
10 V
5V
1 000
Collector Current IC (mA)
Collector to Emitter Dark Current ICEO (nA)
100
10
1
–50
–25
0
25
50
75
100
Ambient Temperature TA (˚C)
IF = 50 mA
20 mA
10 mA
5 mA
10
2 mA
5
1 mA
1
0.5
0.1
0.0
0.2
0.4
0.6
0.8
1.0
Collector Saturation Voltage VCE(sat) (V)
Remark The graphs indicate nominal characteristics.
R08DS0095EJ0400 Rev.4.00
Jan 23, 2013
Page 6 of 14
PS2805-1, PS2805-4e
NORMALIZED CURRENT TRANSFER
RATIO vs. AMBIENT TEMPERATURE
COLLECTOR CURRENT vs.
COLLECTOR TO EMITTER VOLTAGE
Normalized Current Transfer Ratio CTR
70
Collector Current IC (mA)
60
50
40
0
IF
30
=5
20
mA
mA
20 mA
10
5 mA
10
2
0
4
6
10
8
1.2
1.0
0.8
0.6
0.4
Normalized to 1.0
at TA = 25˚C,
IF = 5 mA, VCE = 5 V
0.2
0
–50
–25
0
25
50
75
Collector to Emitter Voltage VCE (V)
Ambient Temperature TA (˚C)
SWITCHING TIME vs.
LOAD RESISTANCE
CURRENT TRANSFER RATIO vs.
FORWARD CURRENT
100
Switching Time t (μ s)
VCC = 5 V,
50 IC = 2 mA,
CTR = 236%
Current Transfer Ratio CTR (%)
100
tf
tr
10
5
td
ts
1
0.5
0.1
0.01
0.05 0.1
0.5
1
5
300 VCE = 5 V,
n=3
250
200
150
100
50
0.02
10
Sample A
B
C
0.1
10
1.0
Load Resistance RL (kΩ)
Forward Current IF (mA)
SWITCHING TIME vs.
LOAD RESISTANCE
FREQUENCY RESPONSE
1 000
VCC = 5 V,
IF = 5 mA,
CTR = 236%
100
ts
10
tr
td
1
IF = 5 mA,
VCE = 5 V
0
tf
Normalized Gain Gv
Switching Time t (μ s)
100
–5
–10
RL = 1 kΩ
–15
100 Ω
–20
300 Ω
0.1
1
10
100
Load Resistance RL (kΩ)
0.5 1
2
5
10 20
50 100 200 500
Frequency f (kHz)
Remark The graphs indicate nominal characteristics.
R08DS0095EJ0400 Rev.4.00
Jan 23, 2013
Page 7 of 14
PS2805-1, PS2805-4e
TAPING SPECIFICATIONS (UNIT: mm)
2.0±0.1
φ 1.5+0.1
–0
16.0±0.3
7.5±0.1
4.0±0.1
7.55±0.1
1.75±0.1
Outline and Dimensions (Tape)
2.8 MAX.
0.3
1.55±0.1
2.3±0.1
2.85±0.1
4.0±0.1
Tape Direction
PS2805-1-F3
301
R5
301
R5
301
R5
301
R5
301
R5
Outline and Dimensions (Reel)
R 1.0
φ 21.0±0.8
φ 100±1.0
2.0±0.5
φ13.0±0.2
φ 330±2.0
2.0±0.5
17.5±1.0
21.5±1.0
Packing: 3 500 pcs/reel
R08DS0095EJ0400 Rev.4.00
Jan 23, 2013
15.9 to 19.4
Outer edge of
flange
Page 8 of 14
PS2805-1, PS2805-4e
10.7±0.1
2.8 MAX.
16.0±0.3
φ 1.5+0.1
–0
7.5±0.1
2.0±0.1
4.0±0.1
1.75±0.1
Outline and Dimensions (Tape)
0.3
2.3±0.1
8.3±0.1
1.55±0.1
12.0±0.1
Tape Direction
PS2805-4-F3
Outline and Dimensions (Reel)
R 1.0
φ 21.0±0.8
φ 100±1.0
2.0±0.5
φ13.0±0.2
φ 330±2.0
2.0±0.5
17.5±1.0
21.5±1.0
Packing: 2 500 pcs/reel
R08DS0095EJ0400 Rev.4.00
Jan 23, 2013
15.9 to 19.4
Outer edge of
flange
Page 9 of 14
PS2805-1, PS2805-4e
RECOMMENDED MOUNT PAD DIMENSIONS (UNIT: mm)
0.8
1.45
1.27
6.25
Remark All dimensions in this figure must be evaluated before use.
R08DS0095EJ0400 Rev.4.00
Jan 23, 2013
Page 10 of 14
PS2805-1, PS2805-4e
NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
• Peak reflow temperature
• Time of peak reflow temperature
• Time of temperature higher than 220°C
• Time to preheat temperature from 120 to 180°C
• Number of reflows
• Flux
260°C or below (package surface temperature)
10 seconds or less
60 seconds or less
120±30 s
Three
Rosin flux containing small amount of chlorine (The
flux with a maximum chlorine content of 0.2 Wt% is
recommended.)
Package Surface Temperature T (°C)
Recommended Temperature Profile of Infrared Reflow
(heating)
to 10 s
260°C MAX.
220°C
to 60 s
180°C
120°C
120±30 s
(preheating)
Time (s)
(2) Wave soldering
• Temperature
• Time
• Preheating conditions
• Number of times
•
Flux
(3) Soldering by Soldering Iron
• Peak Temperature (lead part temperature)
• Time (each pins)
• Flux
260°C or below (molten solder temperature)
10 seconds or less
120°C or below (package surface temperature)
One (Allowed to be dipped in solder including plastic
mold portion.)
Rosin flux containing small amount of chlorine (The flux
with a maximum chlorine content of 0.2 Wt% is
recommended.)
350°C or below
3 seconds or less
Rosin flux containing small amount of chlorine (The flux
with a maximum chlorine content of 0.2 Wt% is
recommended.)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead
(4) Cautions
• Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
R08DS0095EJ0400 Rev.4.00
Jan 23, 2013
Page 11 of 14
PS2805-1, PS2805-4e
2. Cautions regarding noise
Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between collectoremitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum
ratings.
3. Measurement conditions of current transfer ratios (CTR), which differ according to photocoupler
Check the setting values before use, since the forward current conditions at CTR measurement differ according to
product.
When using products other than at the specified forward current, the characteristics curves may differ from the
standard curves due to CTR value variations or the like. This tendency may sometimes be obvious, especially below
IF = 1 mA.
Therefore, check the characteristics under the actual operating conditions and thoroughly take variations or the like
into consideration before use.
USAGE CAUTIONS
1. Protect against static electricity when handling.
2. Avoid storage at a high temperature and high humidity.
R08DS0095EJ0400 Rev.4.00
Jan 23, 2013
Page 12 of 14
PS2805-1, PS2805-4e
SPECIFICATION OF VDE MARKS LICENSE DOCUMENT
Parameter
Symbol
Climatic test class (IEC 60068-1/DIN EN 60068-1)
Spec.
Unit
55/100/21
Dielectric strength
maximum operating isolation voltage
Test voltage (partial discharge test, procedure a for type test and random test)
Upr = 1.6 × UIORM, Pd < 5 pC
Test voltage (partial discharge test, procedure b for all devices)
UIORM
Upr
705
1 128
Vpeak
Vpeak
Upr
1 322
Vpeak
UTR
6 000
Vpeak
Upr = 1.875 × UIORM, Pd < 5 pC
Highest permissible overvoltage
Degree of pollution (DIN EN 60664-1 VDE0110 Part 1)
Comparative tracking index (IEC 60112/DIN EN 60112 (VDE 0303 Part 11))
2
CTI
Material group (DIN EN 60664-1 VDE0110 Part 1)
175
III a
Storage temperature range
Tstg
−55 to +150
°C
Operating temperature range
TA
−55 to +100
°C
Ris MIN.
Ris MIN.
10
11
10
Package temperature
Tsi
150
°C
Current (input current IF, Psi = 0)
Isi
300
mA
Power (output or total power dissipation)
Psi
500
mW
Ris MIN.
10
Isolation resistance, minimum value
VIO = 500 V dc at TA = 25°C
VIO = 500 V dc at TA MAX. at least 100°C
12
Ω
Ω
Safety maximum ratings (maximum permissible in case of fault, see thermal
derating curve)
Isolation resistance
VIO = 500 V dc at TA = Tsi
R08DS0095EJ0400 Rev.4.00
Jan 23, 2013
9
Ω
Page 13 of 14
PS2805-1, PS2805-4e
Caution
GaAs Products
This product uses gallium arsenide (GaAs).
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe
the following points.
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or in any way allow it to enter the mouth.
R08DS0095EJ0400 Rev.4.00
Jan 23, 2013
Page 14 of 14
Revision History
PS2805-1, PS2805-4 Data Sheet
Rev.
Date
Page
1.00
4.00
Mar 31, 2003
Jan 23, 2013
−
Throughout
p.1
p.2
p.3
p.4
p.5
p.6
p.8
p.9
p.10
p.11
p.12
P13
Description
Summary
This data sheet was released as PN10253EJ01V0DS
Renesas format is applied to this data sheet.
The ordering number and safety standards are revised.
PHOTOCOUPLER CONSTRUCTION is added as each distance of this
device.
The explanation in MARKING EXAMPLE is revised.
ORDERING INFORMATION is modified with the revision of the safety
standards.
Turn-on Time (ton) and Turn-off Time (toff) are added to the table in
ELECTRICAL CHARACTERISTICS.
The switching time chart is added to the notes in ELECTRICAL
CHARACTERISTICS.
The graph of LONG TERM CTR DEGRADATION is deleted from those in
TYPICAL CHARACTERISTICS.
PS2805-1-F4 is deleted form Tape Direction image in TAPING
SPECIFICATIONS.
PS2805-4-F4 is deleted form Tape Direction image in TAPING
SPECIFICATIONS.
RECOMMENDED MOUNT PAD DIMENSIONS is added.
The note about temperature condition of the recommended soldering
conditions is deleted.
PROGRAMME LOGIC CONTROLLERS EXAMPLE is deleted.
SPECIFICATION OF VDE MARKS LICENSE DOCUMENT is added.
All trademarks and registered trademarks are the property of their respective owners.
C-1
Notice
1.
Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for
the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the
use of these circuits, software, or information.
2.
Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics
3.
Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or
assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein.
technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or
others.
4.
You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. Renesas Electronics assumes no responsibility for any losses incurred by you or
5.
Renesas Electronics products are classified according to the following two quality grades: "Standard" and "High Quality". The recommended applications for each Renesas Electronics product depends on
third parties arising from such alteration, modification, copy or otherwise misappropriation of Renesas Electronics product.
the product's quality grade, as indicated below.
"Standard": Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic
equipment; and industrial robots etc.
"High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; and safety equipment etc.
Renesas Electronics products are neither intended nor authorized for use in products or systems that may pose a direct threat to human life or bodily injury (artificial life support devices or systems, surgical
implantations etc.), or may cause serious property damages (nuclear reactor control systems, military equipment etc.). You must check the quality grade of each Renesas Electronics product before using it
in a particular application. You may not use any Renesas Electronics product for any application for which it is not intended. Renesas Electronics shall not be in any way liable for any damages or losses
incurred by you or third parties arising from the use of any Renesas Electronics product for which the product is not intended by Renesas Electronics.
6.
You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage
range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the
use of Renesas Electronics products beyond such specified ranges.
7.
Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and
malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the
possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to
redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult,
please evaluate the safety of the final products or systems manufactured by you.
8.
Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics
products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes
no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations.
9.
Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or
regulations. You should not use Renesas Electronics products or technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the
development of weapons of mass destruction. When exporting the Renesas Electronics products or technology described in this document, you should comply with the applicable export control laws and
regulations and follow the procedures required by such laws and regulations.
10. It is the responsibility of the buyer or distributor of Renesas Electronics products, who distributes, disposes of, or otherwise places the product with a third party, to notify such third party in advance of the
contents and conditions set forth in this document, Renesas Electronics assumes no responsibility for any losses incurred by you or third parties as a result of unauthorized use of Renesas Electronics
products.
11. This document may not be reproduced or duplicated in any form, in whole or in part, without prior written consent of Renesas Electronics.
12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries.
(Note 1)
"Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries.
(Note 2)
"Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics.
http://www.renesas.com
SALES OFFICES
Refer to "http://www.renesas.com/" for the latest and detailed information.
California Eastern Laboratories, Inc.
4590 Patrick Henry Drive, Santa Clara, California 95054, U.S.A.
Tel: +1-408-919-2500, Fax: +1-408-988-0279
Renesas Electronics Europe Limited
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K
Tel: +44-1628-651-700, Fax: +44-1628-651-804
Renesas Electronics Europe GmbH
Arcadiastrasse 10, 40472 Düsseldorf, Germany
Tel: +49-211-65030, Fax: +49-211-6503-1327
Renesas Electronics (China) Co., Ltd.
7th Floor, Quantum Plaza, No.27 ZhiChunLu Haidian District, Beijing 100083, P.R.China
Tel: +86-10-8235-1155, Fax: +86-10-8235-7679
Renesas Electronics (Shanghai) Co., Ltd.
Unit 204, 205, AZIA Center, No.1233 Lujiazui Ring Rd., Pudong District, Shanghai 200120, China
Tel: +86-21-5877-1818, Fax: +86-21-6887-7858 / -7898
Renesas Electronics Hong Kong Limited
Unit 1601-1613, 16/F., Tower 2, Grand Century Place, 193 Prince Edward Road West, Mongkok, Kowloon, Hong Kong
Tel: +852-2886-9318, Fax: +852 2886-9022/9044
Renesas Electronics Taiwan Co., Ltd.
13F, No. 363, Fu Shing North Road, Taipei, Taiwan
Tel: +886-2-8175-9600, Fax: +886 2-8175-9670
Renesas Electronics Singapore Pte. Ltd.
80 Bendemeer Road, Unit #06-02 Hyflux Innovation Centre Singapore 339949
Tel: +65-6213-0200, Fax: +65-6213-0300
Renesas Electronics Malaysia Sdn.Bhd.
Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No. 18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia
Tel: +60-3-7955-9390, Fax: +60-3-7955-9510
Renesas Electronics Korea Co., Ltd.
11F., Samik Lavied' or Bldg., 720-2 Yeoksam-Dong, Kangnam-Ku, Seoul 135-080, Korea
Tel: +82-2-558-3737, Fax: +82-2-558-5141
© 2012 Renesas Electronics Corporation. All rights reserved.
[Colophon 2.2]
