Data Sheet
PS9351L, PS9351L2
R08DS0127EJ0100
Rev.1.00
Apr 24, 2015
HIGH NOISE REDUCTION, 15 Mbps CMOS OUTPUT TYPE
8mm CREEPAGE 6-PIN SDIP PHOTOCOUPLER
DESCRIPTION
The PS9351L and PS9351L2 are optically coupled isolator containing a GaAlAs LED on the input side and a CMOS
output IC on the output side.
The PS9351L and PS9351L2 are in 6-pin plastic SDIP (Shrink Dual In-line Package). The PS9351L2 has 8 mm
creepage distance. The mount area of 6-pin plastic SDIP is half size of 8-pin DIP.
This photocoupler is high common mode transient immunity (CMR), a high-speed CMOS output type device designed
for high-speed logic interface circuits.
The PS9351L is lead bending type (Gull-wing) for surface mounting.
The PS9351L2 is lead bending type for long creepage distance (Gull-wing) for surface mount.
FEATURES
High-speed response (15 Mbps)
Long creepage distance (8mm MIN. : PS9351L2)
Operable at high temperature (40 to +100°C)
High common mode transient immunity (CMH, CML = ±20 kV/µs TYP.)
High isolation voltage (BV = 5000 Vr.m.s.)
Pulse width distortion (|tPHL–tPLH| = 5 ns TYP.)
Ordering number of tape product : PS9351L-E3: 2,000 pcs/reel
: PS9351L2-E3: 2,000 pcs/reel
Pb-Free product
Safety standards
• UL approved : No. E72422
• CSA approved : No. CA 101391 (CA5A, CAN/CSA-22.2 60065, 60950)
• DIN EN 60747-5-5 (VDE0884-5) approved (Option)
APPLICATIONS
FA Network
Measurement equipment
PDP
R08DS0127EJ0100 Rev.1.00
Apr 24, 2015
PIN CONNECTION
(Top View)
6
5
4
SHIELD
1
2
1. Anode
2. NC
3. Cathode
4. GND
5. VO
6. VDD
3
TRUTH TABLE
LED
Output
ON
L
OFF
H
Page 1 of 13
PS9351L, PS9351L2
PACKAGE DIMENSIONS (UNIT: mm)
Lead Bending Type (Gull-wing) For Surface Mount
PS9351L
4.58±0.3
6.8±0.25
(0.82)
9.7±0.3
0.25±0.15
0.2±0.15
3.5±0.2
3.7±0.25
7.62
1.27
0.4±0.1
0.8±0.25
0.25 M
Lead Bending Type (Gull-wing) For Long Creepage Distance (Surface Mount)
PS9351L2
4.58±0.3
6.8±0.25
(0.82)
11.5±0.3
1.27
0.4±0.1
R08DS0127EJ0100 Rev.1.00
Apr 24, 2015
0.25±0.15
0.2±0.15
3.5±0.2
3.7±0.25
7.62
0.75±0.25
0.25 M
Page 2 of 13
PS9351L, PS9351L2
MARKING EXAMPLE
Company Initial
R
9351
N031
Type Number
Assembly Lot
No. 1 pin Mark
N
0 31
Week Assembled
Year Assembled
(Last 1 Digit)
Rank Code
PHOTOCOUPLER CONSTRUCTION
Parameter
Air Distance (MIN.)
Outer Creepage Distance (MIN.)
Isolation Distance (MIN.)
R08DS0127EJ0100 Rev.1.00
Apr 24, 2015
PS9351L
PS9351L2
7 mm
8 mm
7 mm
8 mm
0.4 mm
0.4 mm
Page 3 of 13
PS9351L, PS9351L2
ORDERING INFORMATION
Part Number
Order Number
Packing Style
Solder Plating
Specification
Safety Standard
Approval
PS9351L
PS9351L-AX
Pb-Free
20 pcs (Tape 20 pcs cut)
PS9351L-E3
PS9351L-E3-AX
(Ni/Pd/Au)
Embossed Tape 2 000
pcs/reel
PS9351L2
PS9351L2-AX
20 pcs (Tape 20 pcs cut)
PS9351L2-E3
PS9351L2-E3AX
Embossed Tape 2 000
pcs/reel
PS9351L-V
PS9351L-V-AX
20 pcs (Tape 20 pcs cut)
PS9351L-V-E3
PS9351L-V-E3AX
Embossed Tape 2 000
pcs/reel
PS9351L2-V
PS9351L2-V-AX
20 pcs (Tape 20 pcs cut)
PS9351L2-VE3
PS9351L2-V-E3AX
Embossed Tape 2 000
pcs/reel
Note: *1.
Application
Part
Number*1
Standard products
UL, CSA approved
PS9351L
Standard products
UL, CSA approved
PS9351L2
DIN EN60747-5-5
(VDE0884-5)
approved (Option)
DIN EN60747-5-5
(VDE0884-5)
approved (Option)
PS9351L
PS9351L2
For the application of the Safety Standard, following part number should be used.
ABSOLUTE MAXIMUM RATINGS (TA = 25C, unless otherwise specified)
Parameter
Diode
Detector
Forward Current
*1
Symbol
Ratings
Unit
IF
25
mA
Reverse Voltage
VR
5
V
Supply Voltage
VDD
0 to 5.5
V
Output Voltage
VO
0.5 to VDD+0.5
V
Output Current
IO
2
mA
Isolation Voltage
*2
BV
5 000
Vr.m.s.
Operating Ambient Temperature
TA
40 to +100
C
Storage Temperature
Tstg
55 to +125
C
Notes: *1. Reduced to 0.3 mA/C at TA = 70C or more.
*2. AC voltage for 1 minute at TA = 25C, RH = 60% between input and output.
Pins 1-3 shorted together, 4-6 shorted together.
RECOMMENDED OPERATING CONDITIONS (TA = 25C)
Parameter
Symbol
MIN.
Forward Current
IF
10
Supply Voltage
VDD
4.5
R08DS0127EJ0100 Rev.1.00
Apr 24, 2015
TYP.
MAX.
Unit
16
mA
5.0
5.5
V
Page 4 of 13
PS9351L, PS9351L2
ELECTRICAL CHARACTERISTICS (TA = 40 to +100C, VDD = 4.5 to 5.5 V, unless
otherwise specified)
Parameter
Diode
Conditions
MIN.
TYP. *1
MAX.
1.2
1.56
1.8
V
10
A
Forward Voltage
VF
IF = 10 mA, TA = 25C
Reverse Current
IR
VR = 3 V, TA = 25C
Terminal Capacitance
Ct
V = 0 V, f = 1 MHz,
TA = 25C
30
IF = 0 mA
2.5
5
2
5
Detector High Level Supply Current
Coupled
Symbol
IDDH
Low Level Supply Current
IDDL
IF = 10 mA
High Level Output Voltage
VOH
IO = 20 A, IF = 0 mA
Low Level Output Voltage *2
VOL
IO = 20 A, IF = 10 mA
4.0
pF
5.0
0.1
1.9
5
Threshold Input Current
IFHL
VO < 1 V
RI-O
VI-O = 1 kVDC,
RH = 40 to 60%,
TA = 25C
Isolation Capacitance
CI-O
V = 0 V, f = 1 MHz,
TA = 25C
0.7
Propagation Delay Time
(H L) *3
tPHL
IF = 10 mA, VDD = 5 V,
CL = 15 pF, CMOS Levels
30
60
Propagation Delay Time
(L H) *3
tPLH
35
60
tPHLtPLH
5
30
Propagation Delay Skew
mA
V
0
Isolation Resistance
Pulse Width Distortion
(PWD) *3
Unit
mA
1011
tPSK
pF
ns
40
Rise Time
tr
4
Fall Time
tf
4
Common Mode
Transient Immunity at
High Level Output*4
CMH
VDD = 5 V, IF = 0 mA,
VCM = 1 kV, VO > 4 V,
TA = 25C
15
20
Common Mode
Transient Immunity at
Low Level Output*4
CML
VDD = 5 V, IF = 10 mA,
VCM = 1 kV, VO < 1 V,
TA = 25C
15
20
kV/s
Notes: *1. Typical values at TA = 25C
*2. Because VOL of 2 V or more may be output when LED current input and when output supply, it is important to
confirm the characteristics (operation with the power supply on and off) during design, before using this
device.
R08DS0127EJ0100 Rev.1.00
Apr 24, 2015
Page 5 of 13
PS9351L, PS9351L2
*3 Test circuit for propagation delay time
Pulse input (IF = 10 mA)
(PW = 100 ns,
Duty cycle = 50%)
Input
(Monitor)
1
6
2
5
3
4
SHIELD
VDD = 5 V
IF = 10 mA
50%
Input
0.1 µF
VO (Monitor)
CL = 15 pF
Output
47 Ω
tPHL
tPLH
2.5 V
VOL
Remark CL includes probe and stray wiring capacitance.
4 Test circuit for common mode transient immunity
1 kV
VCM 90%
IF
SW
1
6
2
5
3
SHIELD
4
0.1 µF
VDD = 5 V
VO (Monitor)
CL = 15 pF
+
VCM = 1 kV
10%
0V
tr
VO
(IF = 0 mA)
tf
VOH
4V
1V
VO
(IF = 10 mA)
VOL
Remark CL includes probe and stray wiring capacitance.
R08DS0127EJ0100 Rev.1.00
Apr 24, 2015
Page 6 of 13
PS9351L, PS9351L2
TYPICAL CHARACTERISTICS (TA = 25°C unless otherwise specified)
FORWARD CURRENT vs.
FORWARD VOLTAGE
MAXIMUM FORWARD CURRENT
vs. AMBIENT TEMPERATURE
100
25
Forward Current IF (mA)
Maximum Forward Current IF (V)
30
20
15
10
5
0
0
25
50
75
100
10
TA = +100°C
+85°C
+50°C
+25°C
0°C
–40°C
1
0.1
0.01
1.0
125
1.2
1.4
THRESHOLD INPUT CURRENT vs.
AMBIENT TEMPERATURE
High Level Supply Current ICCH (mA)
Low Level Supply Current ICCL (mA)
Threshold Input Current IFHL (mA)
VDD = 5V
Vo < 1.0V
3
2
1
-25
0
25
50
75
100
TPHL
TPLH
20
10
PWD
-10
-40
-20
0
20
40
60
Ambient Temperature Ta (°C)
R08DS0127EJ0100 Rev.1.00
Apr 24, 2015
80
100
Propagation Delay Time TPHL, TPLH (ns)
Maximum Propagation Delays TPHL-TPLH (ns)
Propagation Delay Time TPHL, TPLH (ns)
Maximum Propagation Delays TPHL-TPLH (ns)
60
0
2.4
VDD = 5.5 V
4
3
IDDH (IF = 0 mA)
2
IDDL (IF = 10 mA)
1
0
–50
–25
0
25
50
75
100
Ambient Temperature Ta (°C)
PROPAGATION DELAY TIME,
MAXIMUM PROPAGATION DELAYS
vs. AMBIENT TEMPERATURE
30
2.2
5
Ambient Temperature Ta (°C)
IF = 10mA
50 VDD = 5V
CL=15pF
40
2.0
SUPPLY CURRENT vs. AMBIENT TEMPERATURE
5
0
-50
1.8
Forward Voltage VF (V)
Ambient Temperature Ta (°C)
4
1.6
PROPAGATION DELAY TIME,
MAXIMUM PROPAGATION DELAYS
vs. FORWARD CURRENT
60
50
TPLH
40
30
20
TPHL
10
TPHL-TPLH
0
VDD = 5V
CL = 15pF
-10
-20
4
6
8
10
12
14
16
Forward Current IF (mA)
Page 7 of 13
PS9351L, PS9351L2
TAPING SPECIFICATIONS (UNIT:mm)
7.5±0.1
1.5 +0.1
–0
4.5 MAX.
10.2±0.1
4.0±0.1
16.0±0.3
2.0±0.1
1.75±0.1
Outline and Dimensions (Tape)
1.5 +0.1
–0
0.35
8.0±0.1
4.05±0.1
5.08±0.1
Tape Direction
PS9351L-E3
Outline and Dimensions (Reel)
R 1.0
21.0±0.8
100±1.0
2.0±0.5
13.0±0.2
330±2.0
2.0±0.5
17.5±1.0
21.5±1.0
Packing: 2 000 pcs/reel
R08DS0127EJ0100 Rev.1.00
Apr 24, 2015
Page 8 of 13
PS9351L, PS9351L2
11.5±0.1
1.5 +0.1
–0
4.5 MAX.
12.0±0.1
4.0±0.1
24.0±0.3
2.0±0.1
1.75±0.1
Outline and Dimensions (Tape)
2.0 +0.1
–0
8.0±0.1
0.35
4.05±0.1
5.08±0.1
Tape Direction
PS9351L2-E3
Outline and Dimensions (Reel)
R 1.0
21.0±0.8
100±1.0
2.0±0.5
13.0±0.2
330±2.0
2.0±0.5
25.5±1.0
29.5±1.0
Packing: 2 000 pcs/reel
R08DS0127EJ0100 Rev.1.00
Apr 24, 2015
Page 9 of 13
PS9351L, PS9351L2
RECOMMENDED MOUNT PAD DIMENSIONS (UNIT:mm)
B
C
D
A
A
B
C
D
PS9351L
lead bending type (Gull-wing)
for surface mount
9.2
1.27
0.8
2.2
PS9351L2
lead bending type (Gull-wing)
for long creepage distance (surface mount)
10.2
1.27
0.8
2.2
Part Number
Lead Bending
R08DS0127EJ0100 Rev.1.00
Apr 24, 2015
Page 10 of 13
PS9351L, PS9351L2
NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
• Peak reflow temperature
• Time of peak reflow temperature
• Time of temperature higher than 220C
• Time to preheat temperature from 120 to 180C
• Number of reflows
• Flux
260C or below (package surface temperature)
10 seconds or less
60 seconds or less
120 30 s
Three
Rosin flux containing small amount of chlorine (The flux
with a maximum chlorine content of 0.2 Wt% is
recommended.)
Package Surface Temperature T (°C)
Recommended Temperature Profile of Infrared Reflow
(heating)
to 10 s
260°C MAX.
220°C
to 60 s
180°C
120°C
120±30 s
(preheating)
Time (s)
(2) Wave soldering
• Temperature
• Time
• Preheating conditions
• Number of times
• Flux
260C or below (molten solder temperature)
10 seconds or less
120C or below (package surface temperature)
One (Allowed to be dipped in solder including plastic mold portion.)
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
(3) Soldering by Soldering Iron
• Peak Temperature (lead part temperature) 350C or below
• Time (each pins)
3 seconds or less
• Flux
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead
R08DS0127EJ0100 Rev.1.00
Apr 24, 2015
Page 11 of 13
PS9351L, PS9351L2
(4) Cautions
• Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
2. Cautions regarding noise
Be aware that when voltage is applied suddenly between the photocoupler’s input and output at startup, the output
transistor may enter the on state, even if the voltage is within the absolute maximum ratings.
USAGE CAUTIONS
1. This product is weak for static electricity by designed with high-speed integrated circuit so protect against static
electricity when handling.
2. By-pass capacitor of more than 0.1 F is used between VDD and GND near device. Also, ensure that the distance
between the leads of the photocoupler and capacitor is no more than 10 mm.
3. Pin 2 (which is an NC*1 pin) can either be connected directly to the GND pin on the LED side or left open.
Unconnected pins should not be used as a bypass for signals or for any other similar purpose because this may
degrade the internal noise environment of the device.
*1 NC: Not connected (No connection)
4. Avoid storage at a high temperature and high humidity.
R08DS0127EJ0100 Rev.1.00
Apr 24, 2015
Page 12 of 13
PS9351L, PS9351L2
SPECIFICATION OF VDE MARKS LICENSE DOCUMENT
Parameter
Symbol
Climatic test class (IEC 60068-1/DIN EN 60068-1)
Dielectric strength
maximum operating isolation voltage
Test voltage (partial discharge test, procedure a for type test and random test)
Upr = 1.6 UIORM., Pd 5 pC
Spec.
Unit
40/100/21
UIORM
Upr
1 130
1 808
Vpeak
Vpeak
Test voltage (partial discharge test, procedure b for all devices)
Upr = 1.875 UIORM., Pd 5 pC
Upr
2 119
Vpeak
Highest permissible overvoltage
UTR
8 000
Vpeak
CTI
175
Degree of pollution (DIN EN 60664-1 VDE0110 Part 1)
Comparative tracking index (IEC 60112/DIN EN 60112 (VDE 0303 Part 11))
2
Material group (DIN EN 60664-1 VDE0110 Part 1)
III a
Storage temperature range
Tstg
–55 to +125
°C
Operating temperature range
TA
–40 to +100
°C
Ris MIN.
Ris MIN.
1012
1011
Tsi
Isi
Psi
175
400
700
°C
mA
mW
Ris MIN.
109
Isolation resistance, minimum value
VIO = 500 V dc at TA = 25°C
VIO = 500 V dc at TA MAX. at least 100°C
Safety maximum ratings (maximum permissible in case of fault, see thermal
derating curve)
Package temperature
Current (input current IF, Psi = 0)
Power (output or total power dissipation)
Isolation resistance
VIO = 500 V dc at TA = Tsi
R08DS0127EJ0100 Rev.1.00
Apr 24, 2015
Page 13 of 13
Caution
GaAs Products
This product uses gallium arsenide (GaAs).
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe
the following points.
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or i any way allow it to enter the mouth.
All trademarks and registered trademarks are the property of their respective owners.
Notice
1.
Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for
the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the
use of these circuits, software, or information.
2.
Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics
3.
Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or
assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein.
technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or
others.
4.
You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. Renesas Electronics assumes no responsibility for any losses incurred by you or
5.
Renesas Electronics products are classified according to the following two quality grades: "Standard" and "High Quality". The recommended applications for each Renesas Electronics product depends on
third parties arising from such alteration, modification, copy or otherwise misappropriation of Renesas Electronics product.
the product's quality grade, as indicated below.
"Standard": Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic
equipment; and industrial robots etc.
"High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; and safety equipment etc.
Renesas Electronics products are neither intended nor authorized for use in products or systems that may pose a direct threat to human life or bodily injury (artificial life support devices or systems, surgical
implantations etc.), or may cause serious property damages (nuclear reactor control systems, military equipment etc.). You must check the quality grade of each Renesas Electronics product before using it
in a particular application. You may not use any Renesas Electronics product for any application for which it is not intended. Renesas Electronics shall not be in any way liable for any damages or losses
incurred by you or third parties arising from the use of any Renesas Electronics product for which the product is not intended by Renesas Electronics.
6.
You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage
range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the
use of Renesas Electronics products beyond such specified ranges.
7.
Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and
malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the
possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to
redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult,
please evaluate the safety of the final products or systems manufactured by you.
8.
Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics
products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes
no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations.
9.
Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or
regulations. You should not use Renesas Electronics products or technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the
development of weapons of mass destruction. When exporting the Renesas Electronics products or technology described in this document, you should comply with the applicable export control laws and
regulations and follow the procedures required by such laws and regulations.
10. It is the responsibility of the buyer or distributor of Renesas Electronics products, who distributes, disposes of, or otherwise places the product with a third party, to notify such third party in advance of the
contents and conditions set forth in this document, Renesas Electronics assumes no responsibility for any losses incurred by you or third parties as a result of unauthorized use of Renesas Electronics
products.
11. This document may not be reproduced or duplicated in any form, in whole or in part, without prior written consent of Renesas Electronics.
12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries.
(Note 1)
"Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries.
(Note 2)
"Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics.
http://www.renesas.com
SALES OFFICES
Refer to "http://www.renesas.com/" for the latest and detailed information.
California Eastern Laboratories, Inc.
4590 Patrick Henry Drive, Santa Clara, California 95054-1817, U.S.A.
Tel: +1-408-919-2500, Fax: +1-408-988-0279
Renesas Electronics Europe Limited
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K
Tel: +44-1628-585-100, Fax: +44-1628-585-900
Renesas Electronics Europe GmbH
Arcadiastrasse 10, 40472 Düsseldorf, Germany
Tel: +49-211-6503-0, Fax: +49-211-6503-1327
Renesas Electronics (China) Co., Ltd.
Room 1709, Quantum Plaza, No.27 ZhiChunLu Haidian District, Beijing 100191, P.R.China
Tel: +86-10-8235-1155, Fax: +86-10-8235-7679
Renesas Electronics (Shanghai) Co., Ltd.
Unit 301, Tower A, Central Towers, 555 Langao Road, Putuo District, Shanghai, P. R. China 200333
Tel: +86-21-2226-0888, Fax: +86-21-2226-0999
Renesas Electronics Hong Kong Limited
Unit 1601-1611, 16/F., Tower 2, Grand Century Place, 193 Prince Edward Road West, Mongkok, Kowloon, Hong Kong
Tel: +852-2265-6688, Fax: +852 2886-9022
Renesas Electronics Taiwan Co., Ltd.
13F, No. 363, Fu Shing North Road, Taipei 10543, Taiwan
Tel: +886-2-8175-9600, Fax: +886 2-8175-9670
Renesas Electronics Singapore Pte. Ltd.
80 Bendemeer Road, Unit #06-02 Hyflux Innovation Centre, Singapore 339949
Tel: +65-6213-0200, Fax: +65-6213-0300
Renesas Electronics Malaysia Sdn.Bhd.
Unit 1207, Block B, Menara Amcorp, Amcorp Trade Centre, No. 18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia
Tel: +60-3-7955-9390, Fax: +60-3-7955-9510
Renesas Electronics India Pvt. Ltd.
No.777C, 100 Feet Road, HALII Stage, Indiranagar, Bangalore, India
Tel: +91-80-67208700, Fax: +91-80-67208777
Renesas Electronics Korea Co., Ltd.
12F., 234 Teheran-ro, Gangnam-Gu, Seoul, 135-080, Korea
Tel: +82-2-558-3737, Fax: +82-2-558-5141
© 2015 Renesas Electronics Corporation. All rights reserved.
Colophon 5.0
工商网监
湘ICP备2023018690号
