PX3511D
®
Data Sheet
February 26, 2007
Advanced Synchronous Rectified Buck
MOSFET Driver with Protection Features
The PX3511D is high frequency MOSFET driver specifically
designed to drive upper and lower power N-Channel
MOSFETs in a synchronous rectified buck converter
topology. This driver combined with the PX3511D Digital
Multi-Phase Buck PWM controller and N-Channel MOSFETs
forms a complete core-voltage regulator solution for
advanced microprocessors.
The PX3511D drives both upper and lower gates over a
range of 4.5V to 13.2V. This drive-voltage provides the
flexibility necessary to optimize applications involving tradeoffs between gate charge and conduction losses.
An advanced adaptive zero shoot-through protection is
integrated to prevent both the upper and lower MOSFETs
from conducting simultaneously and to minimize the dead
time. The PX3511D includes an overvoltage protection
feature operational before VCC exceeds its turn-on
threshold, at which the PHASE node is connected to the
gate of the low side MOSFET (LGATE). The output voltage
of the converter is then limited by the threshold of the low
side MOSFET, which provides some protection to the
microprocessor if the upper MOSFET(s) is shorted.
The PX3511D also features an input that recognizes a highimpedance state, working together with Intersil multi-phase
PWM controllers to prevent negative transients on the
controlled output voltage when operation is suspended. This
feature eliminates the need for the schottky diode that may
be utilized in a power system to protect the load from
negative output voltage damage.
Ordering Information
PART NUMBER
PART
(Note)
MARKING
PX3511DDDG-RA 11DD
TEMP.
RANGE
(°C)
Features
• Dual MOSFET Drives for Synchronous Rectified Bridge
• Pin-to-pin Compatible with ISL6596
• Advanced Adaptive Zero Shoot-Through Protection
- Body Diode Detection
- Auto-zero of rDS(ON) Conduction Offset Effect
• Adjustable Gate Voltage for Optimal Efficiency
• 36V Internal Bootstrap Schottky Diode
• Bootstrap Capacitor Overcharging Prevention
• Supports High Switching Frequency (up to 2MHz)
- 3A Sinking Current Capability
- Fast Rise/Fall Times and Low Propagation Delays
• Optimized for 3.3V PWM Input
• Three-State PWM Input for Output Stage Shutdown
• Three-State PWM Input Hysteresis for Applications With
Power Sequencing Requirement
• Pre-POR Overvoltage Protection
• VCC Undervoltage Protection
• Expandable Bottom Copper Pad for Enhanced Heat
Sinking
• Dual Flat No-Lead (DFN) Package
- Near Chip-Scale Package Footprint; Improves PCB
Efficiency and Thinner in Profile
• Pb-Free Plus Anneal Available (RoHS Compliant)
Applications
• Optimized for POL DC/DC Converters for IBA Systems
• Core Regulators for Intel® and AMD® Microprocessors
PACKAGE
(Pb-free)
PKG.
DWG. #
0 to +85 10 Ld 3x3 DFN L10.3X3
Tape and Reel
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100%
matte tin plate termination finish, which are RoHS compliant and
compatible with both SnPb and Pb-free soldering operations. Intersil
Pb-free products are MSL classified at Pb-free peak reflow
temperatures that meet or exceed the Pb-free requirements of
IPC/JEDEC J STD-020.
1
FN6463.0
• High Current DC/DC Converters
• High Frequency and High Efficiency VRM and VRD
Related Literature
Technical Brief TB363 “Guidelines for Handling and
Processing Moisture Sensitive Surface Mount Devices
(SMDs)”
Technical Brief TB389 “PCB Land Pattern Design and
Surface Mount Guidelines for QFN (MLFP) Packages”
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2006. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.
PX3511D
Pinouts
PX3511D
(10 LD 3x3 DFN)
TOP VIEW
1
UGATE
BOOT
2
N/C
3
PWM
4
GND
5
10 PHASE
9 PVCC
GND
8
N/C
7
VCC
6 LGATE
Block Diagram
PX3511D
UVCC
BOOT
VCC
UGATE
Pre-POR OVP
FEATURES
+5V
13.6K
POR/
PWM
SHOOTTHROUGH
PROTECTION
PHASE
(LVCC)
PVCC
UVCC = PVCC FOR PX3511D
CONTROL
6.4K
LOGIC
LGATE
GND
PAD
2
FOR DFN DEVICES, THE PAD ON THE BOTTOM SIDE OF
THE PACKAGE MUST BE SOLDERED TO THE CIRCUIT’S GROUND.
FN6463.0
February 26, 2007
Typical Application - 4 Channel Converter Using ISL6595 and PX3511D Gate Drivers
+12V
PX3511D
+5V
1 UGATE
PHASE 8
2 BOOT
PVCC 7
3 PWM
VCC 6
4 GND
LGATE 5
3
+3.3V
VDD
V12_SEN
1 UGATE
PHASE 8
OUT1
2 BOOT
PVCC 7
VID4
OUT2
3 PWM
VCC 6
VID3
ISEN1
4 GND
LGATE 5
VID2
OUT3
ISL6595
VID1
OUT4
VID0
ISEN2
VID5
OUT5
LL0
OUT6
LL1
ISEN3
OUTEN
OUT7
OUT8
TO µP
VCC_PWRGD
Vout
PX3511D
1 UGATE
PHASE 8
2 BOOT
PVCC 7
3 PWM
VCC 6
4 GND
LGATE 5
RTN
ISEN4
OUT9
RESET_N
OUT10
PX3511D
ISEN5
1 UGATE
PHASE 8
PVCC 7
FAULT
FAULT1
OUT11
2 BOOT
OUTPUTS
FAULT2
OUT12
3 PWM
VCC 6
ISEN6
4 GND
LGATE 5
FN6463.0
February 26, 2007
I2C I/F
BUS
SDA
TEMP_SEN
SCL
CAL_CUR_EN
RTHERM
SADDR
CAL_CUR_SEN
VSENP
VSENN
PX3511D
FROM µP
PX3511D
GND
PX3511D
Absolute Maximum Ratings
Thermal Information
Supply Voltage (VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15V
Supply Voltage (PVCC) . . . . . . . . . . . . . . . . . . . . . . . . . VCC + 0.3V
BOOT Voltage (VBOOT-GND). . . . . . . . . . . . . . . . . . . . . . . . . . . .36V
Input Voltage (VPWM) . . . . . . . . . . . . . . . . . . . . . . GND - 0.3V to 7V
UGATE. . . . . . . . . . . . . . . . . . . VPHASE - 0.3VDC to VBOOT + 0.3V
VPHASE - 3.5V (
很抱歉,暂时无法提供与“PX3511DDDG-RA”相匹配的价格&库存,您可以联系我们找货
免费人工找货