QS4A210QG8

IDTQS4A210 HIGH-PERFORMANCE CMOS TWO-CHANNEL SP4T MUX/DEMUX INDUSTRIAL TEMPERATURE RANGE QUICKSWITCH® PRODUCTS HIGH-PERFORMANCE CMOS TWO CHANNEL SP4T MUX/DEMUX FEATURES: • • • • • • • • • • DESCRIPTION: Ω Low ON resistance: r DS(ON) = 5Ω Fast transition time: t TRAN = 6ns Wide bandwidth: 700MHz (-3dB point) Crosstalk: -110dB at 50KHz, -68dB at 5MHz, -66dB at 30MHz Off-isolation: -90dB at 50KHz, -60dB at 5MHz, -50dB at 30MHz Single 5V supply Can be used as multiplexer or demultiplexer TTL-compatible control inputs μA Ultra-low quiescent current: 3μ Available in QSOP package The QS4A210 is a high-performance CMOS two-channel SP4T multiplexer/demultiplexer with individual enables. The low On-resistance of the QS4A210 allows inputs to be connected to outputs with low insertion loss and high bandwidth. TTL-compatible control circuitry with “Break-Before-Make” feature prevents contention. The QS4A210 with 700MHz bandwidth makes it ideal for high-performance video signal switching, audio signal switching, and telecom routing applications. Low power dissipation makes this device ideal for battery operated and remote instrumentation applications. The QS4A210 is offered in the QSOP package which has several advantages over conventional packages such as PDIP and SOIC, including: • Reduced signal delays due to denser component packaging on circuit boards • Reduced system noise due to less pin inductance, resulting in lower ground bounce APPLICATIONS: • • • • • • • • • IDTQS4A210 High-speed video signal switching/routing HDTV-quality video signal multiplexing Audio signal switching/routing Data acquisition ATE systems Telecomm routing Switch between multiple video sources Token Ring transceivers High-speed networking The QS4A210 is characterized for operation at -40°C to +85°C. FUNCTIONAL BLOCK DIAGRAM I0A I1A YA I2A I3A I0B I1B YB I2B I3B S0 S1 CO NTRO L EA LO G IC EB IDT and the IDT logo are registered trademarks of Integrated Device Technology, Inc. INDUSTRIAL TEMPERATURE RANGE c 2014 Integrated Device Technology, Inc. APRIL 2014 1 DSC-5550/3 IDTQS4A210 HIGH-PERFORMANCE CMOS TWO-CHANNEL SP4T MUX/DEMUX INDUSTRIAL TEMPERATURE RANGE ABSOLUTE MAXIMUM RATINGS(1) PIN CONFIGURATION EA 1 16 VCC S1 2 15 EB Symbol Description VTERM(2) Max Unit VTERM(3) Supply Voltage to Ground –0.5 to +7 V DC Switch Voltage VS –0.5 to +7 V — Analog Input Voltage –0.5 to +7 V VTERM(3) DC Input Voltage VIN –0.5 to +7 V I3A 3 14 S0 VAC V 4 13 I3B AC Input Voltage (pulse width ≤20ns) –3 I2A IOUT DC Output Current 120 mA I1A 5 12 I2B PMAX Maximum Power Dissipation 0.7 W I0A 6 11 I1B TSTG Storage Temperature –65 to +150 °C YA 7 10 I0B GND 8 9 YB NOTES: 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. 2. VCC terminals. 3. All terminals except VCC . QSOP TOP VIEW PIN DESCRIPTION Pin Names I/O Description IxA I/O Demux Port A IxB I/O Demux Port B EA, EB I Enable Inputs S0, S1 I Select Inputs YA, YB I/O Mux Port A, B FUNCTION TABLE(1) Enable Select Mux/Demux Ports EA EB S1 S0 YA YB Function H X X X Z X Disable A X H X X X Z Disable B L L L L 10A 10B S1 - 0 = 0 L L L H 11A 11B S1 - 0 = 1 L L H L 12A 12B S1 - 0 = 2 L L H H 13A 13B S1 - 0 = 3 NOTE: 1. H = HIGH Voltage Level L = LOW Voltage Level X = Don't Care Z = High-Impedance 2 IDTQS4A210 HIGH-PERFORMANCE CMOS TWO-CHANNEL SP4T MUX/DEMUX INDUSTRIAL TEMPERATURE RANGE DC ELECTRICAL CHARACTERISTICS OVER OPERATING RANGE Following Conditions Apply Unless Otherwise Specified: Industrial: TA = –40°C to +85°C, VCC = 5V ± 5% Symbol Parameter Test Conditions Min. Typ.(1) Max. Unit Analog Switch VIN Analog Signal Range(2) –0.5 1 Vcc - 1 V rDS(ON) Drain-source ON resistance(2,3) Vcc = Min., VIN = 0V, ION = 30mA — 5 7 Ω Vcc = Min., VIN = 2.4V, ION = 15mA — 13 17 IC(OFF) Channel Off Leakage Current IN = Vcc or 0V; YN = 0V or Vcc; EA = EB = Vcc — 2 — nA IC(ON) Channel On Leakage Current IN = YN = 0V — 2 — nA (each channel is turned on sequentially) Digital Control VIH Input HIGH Voltage Guaranteed Logic HIGH for Control Pins 2 — — V VIL Input LOW Voltage Guaranteed Logic LOW for Control Pins — — 0.8 V Switching Time of Mux RL = 1KΩ, CL = 100pF 0.5 — 6.6 ns Sx to Y (See Transition Time) 0.5 — 6 ns 0.5 — 6 ns Dynamic Characteristics tTRANS tON(EN) tOFF(EN) Enable Turn-On Time RL = 1KΩ, CL = 100pF EA = EB to Y (See Switching Time) Enable Turn-Off Time RL = 1KΩ, CL = 100pF EA = EB to Y (See Switching Time) tPD Group Delay(2,4) RL = 1KΩ, CL = 100pF — — 250 ps f3dB -3dB Bandwidth VIN = 1Vp-p, RL = 75Ω — 700 — MHz Off-isolation VIN = 1Vp-p, RL = 75Ω, f = 5.5MHz — -60 — dB Crosstalk VIN = 1Vp-p, RL = 75Ω, f = 5.5MHz — -68 — dB Mux Off Capacitance EA = EB = Vcc, VIN = VOUT = 0V — 5.6 — pF Demux Off Capacitance EA = EB = Vcc, VIN = VOUT = 0V — 7.4 — pF Mux On Capacitance EA = EB = 0V, VIN = VOUT = 0V — 12 — pF Demux On Capacitance EA = EB = 0V, VIN = VOUT = 0V — 15 — pF — 1.5 — pC XTALK CMUX(OFF) CDEMUX(OFF) CMUX(ON) CDEMUX(ON) QCI Charge Injection NOTES: 1. Typical values are at VCC = 5.0V, TA = 25°C. 2. Max value is guaranteed but not production tested. 3. Measured by voltage drop between A and C pins or B and D pins at indicated current through the switch. ON resistance is determined by the lower of the voltages on the two (I, Y) pins. 4. The bus switch contributes no group delay other than the RC delay of the ON resistance of the switch and load capacitance. Group delay of the bus switch, when used in a system, is determined by the driving circuit on the driving side of the switch and its interaction with the load on the driven side. POWER SUPPLY CHARACTERISTICS Symbol ICCQ Parameter Quiescent Power Test Conditions VCC = Max., VIN = GND or VCC, f = 0 3 Max. Unit 3 μA IDTQS4A210 HIGH-PERFORMANCE CMOS TWO-CHANNEL SP4T MUX/DEMUX INDUSTRIAL TEMPERATURE RANGE TYPICAL CHARACTERISTICS 60 150 VCC = 5V RL = 75Ω 120 40 90 Crosstalk Crosstalk (dB ) (dB ) V CC = 5V R L = 75 Ω 50 Off-isolation 60 30 Off-isolation 20 30 10 0 1K 10K 100K 1M 10M 100M 0 1G 100M Frequency (Hz) 200M 300M 400M 500M 600M 700M Frequency (H z) Off-isolation and Crosstalk vs. Frequency Off-isolation and Crosstalk vs. Frequency NOTES: 1. Crosstalk = 20 log |VO/VS| 2. Off-isolation = 20 log |VO/VS| NOTES: 1. Crosstalk = 20 log |VO/VS| 2. Off-isolation = 20 log |VO/VS| 160 4 V CC = 5V R L = 75 Ω Crosstalk 140 2 120 R L = 1K Ω (dB ) (dB ) 0 100 Off-isolation R L = 75 Ω V CC = 5V 2 80 4 60 6 1K 40 10K 20K 30K 40K 50K 60K 10K 100K 1M 10M 100M Frequency (H z) 70K Frequency (H z) Insertion Loss vs. Frequency Off-isolation and Crosstalk vs. Frequency NOTE: 1. Insertion Loss = 20 log |VO/VS| NOTES: 1. Crosstalk = 20 log |VO/VS| 2. Off-isolation = 20 log |VO/VS| 4 1G IDTQS4A210 HIGH-PERFORMANCE CMOS TWO-CHANNEL SP4T MUX/DEMUX INDUSTRIAL TEMPERATURE RANGE TYPICAL CHARACTERISTICS (CONTINUED) 18 2 RL = 1KΩ 16 1 r DS (On) - Drain Source On-resistance(Ω ) (dB ) 0 1 RL = 75Ω V CC = 5V 2 4 6 100M 200M 300M 400M 500M 600M 700M F re q u e n c y (H z ) 14 12 VCC = 4.75V 10 8 6 4 Insertion Loss vs. Frequency 0.0 0.5 1.0 1.5 2.0 2.5 3.0 VIN (Volts) NOTE: 1. Insertion Loss = 20 log |VO/VS| RON LINK On-Resistance vs. VIN TEST CIRCUITS 5V 3.0V VCC 0V SELECT INPUT I0A-I2A EA I3A 0V 5V tTRANS S0 QS4A210 VIN 1.5V t TRANS I0B-I3B S1 YB 5V 50 Ω SWITCH OUTPUT VOUT EB GND YA 500 Ω 50pF Transition Time 5 1.5V IDTQS4A210 HIGH-PERFORMANCE CMOS TWO-CHANNEL SP4T MUX/DEMUX INDUSTRIAL TEMPERATURE RANGE TEST CIRCUITS (CONTINUED) 5V 3.0V CONTROL INPUT VCC 1.5V I1A-I3A 0V tOFF(EN) S0 5V I0A S1 QS4A210 I0B-I3B 5V EB OUTPUT 0.3V OUTPUT 0.3V YB VIN VOUT EA YA GND 500 Ω 50 Ω 50pF tOFF(EN) Enable Switching Time +5V +5V VIN VCC VS I0A IxA RS = 50Ω QS4A210 Y0 YA QS4A210 S1 EA EB RL 75Ω GND RS = 50Ω Insertion Loss NOTE: 1. Crosstalk = 20 log |VO/VS| +5V VCC IxA Y0 YA RS = 50Ω RL 75Ω S0 S1 EA EB EA EB Crosstalk NOTE: 1. Insertion Loss = 20 log |VO/VS| QS4A210 RL 75Ω S0 S1 GND +5V Off-Isolation NOTE: 1. Off-isolation = 20 log |VO/VS| 6 Y0 YA IxB S0 IxB VCC I0A GND IDTQS4A210 HIGH-PERFORMANCE CMOS TWO-CHANNEL SP4T MUX/DEMUX INDUSTRIAL TEMPERATURE RANGE ORDERING INFORMATION QS XXXXX XX Device Type Package X Blank 8 Tube or Tray Tape and Reel QG Quarter Size Outline Package - QSOP Green 4A210 High Performance CMOS Two Channel SP4T MUX/DEMUX DATASHEET DOCUMENT HISTORY 04/13/2014 Pg. 7 Updated the Ordering Information by removing non green package version, the "IDT" notation and Adding Tape and Reel information. 7 IMPORTANT NOTICE AND DISCLAIMER RENESAS ELECTRONICS CORPORATION AND ITS SUBSIDIARIES (“RENESAS”) PROVIDES TECHNICAL SPECIFICATIONS AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING REFERENCE DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS. These resources are intended for developers skilled in the art designing with Renesas products. You are solely responsible for (1) selecting the appropriate products for your application, (2) designing, validating, and testing your application, and (3) ensuring your application meets applicable standards, and any other safety, security, or other requirements. These resources are subject to change without notice. Renesas grants you permission to use these resources only for development of an application that uses Renesas products. Other reproduction or use of these resources is strictly prohibited. No license is granted to any other Renesas intellectual property or to any third party intellectual property. Renesas disclaims responsibility for, and you will fully indemnify Renesas and its representatives against, any claims, damages, costs, losses, or liabilities arising out of your use of these resources. Renesas' products are provided only subject to Renesas' Terms and Conditions of Sale or other applicable terms agreed to in writing. No use of any Renesas resources expands or otherwise alters any applicable warranties or warranty disclaimers for these products. (Rev.1.0 Mar 2020) Corporate Headquarters Contact Information TOYOSU FORESIA, 3-2-24 Toyosu, Koto-ku, Tokyo 135-0061, Japan www.renesas.com For further information on a product, technology, the most up-to-date version of a document, or your nearest sales office, please visit: www.renesas.com/contact/ Trademarks Renesas and the Renesas logo are trademarks of Renesas Electronics Corporation. All trademarks and registered trademarks are the property of their respective owners. © 2020 Renesas Electronics Corporation. All rights reserved.