R0KZC000000002R

E8a/E8 14PIN-10PIN Convert Board | Renesas Electronics America Home Products Software and Tools Starter Kits and Platforms Page 1 of 2 Starter-kits and Evaluation Boards E8a/E8 14PIN-10PIN Convert Board Part Number R0KZC000000002R Target Devices Family M16C Series M16C/Tiny Group M16C/26 M16C/26A M16C/28 M16C/29 M16C/60 M16C/62P M16C/6N4, M16C/6N5 M16C/6NK, M16C/6NL, M16C/6NM, M16C/6NN M32C/80 M32C/84 M32C/85 M32C/86 M32C/87 M32C/88 * R8C Family is not supported. Product Overview This product is the board to convert the 14-pin connector of the E8a (or the E8) emulator to the 10-pin connector. When using this product, make sure that the pin assignment of the target system is the same as the following connector pin assignment. It can be used only when the pin assignment of the 10-pin connector-side is the same. E8a (or the E8) emulator software and Flash development Toolkit can be used for this product. Pin Assignment Connector pin assignments of this product are shown below. 14PIN Connector [J1] (Manufacturer: Omron, Part Number: XG4C-1434) 10PIN Connector [J2] (Manufacturer: Omron, Part Number: XG4H-1031) 14PIN Connector [J1] Pin Assignment 10PIN Connector [J2] Pin Assignment Pin No. Signal Pin No. Signal 1 SCLK 1 Vcc 2 GND 2 BUSY 3 CNVss 3 SCLK 4 EPM (RP) 4 RxD http://am.renesas.com/_print_this_page_/products/tools/introductory_evaluation_tools/starte... 5/3/2013 E8a/E8 14PIN-10PIN Convert Board | Renesas Electronics America Page 2 of 2 5 TxD 5 CE (P1_6) 6 N.C 6 EPM (RP) 7 CE (P1_6) 7 GND 8 Vcc 8 RESET 9 BUSY 9 CNVss 10 N.C 10 TxD 11 RxD 12 N.C - - 13 RESET 14 GND Connection Example © 2010-2013 Renesas Electronics Corporation. All rights reserved. http://am.renesas.com/_print_this_page_/products/tools/introductory_evaluation_tools/starte... 5/3/2013