R1LV3216RSA-5S

Preliminary R1LV3216R Series 32Mb Advanced LPSRAM (2M word x 16bit / 4M word x 8bit) REJ03C0367-0001 Preliminary Rev.0.01 2008.03.24 Description The R1LV3216R Series is a family of low voltage 32-Mbit static RAMs organized as 2,097,152-word by 16-bit, fabricated by Renesas’s high-performance 0.15um CMOS and TFT technologies. The R1LV3216R Series is suitable for memory applications where a simple interfacing, battery operating and battery backup are the important design objectives. The R1LV3216R Series is provided in 48-pin thin small outline package [TSOP (I): 12mm x 20mm with pin pitch of 0.5mm] and 52-pin micro thin small outline package [µTSOP (II): 10.79mm x 10.49mm with pin pitch of 0.4mm]. It gives the best solution for compaction of mounting area as well as flexibility of wiring pattern of printed circuit boards. Features • • • • • • • • Single 2.7~3.6V power supply Small stand-by current: 4 µA (3.0V, typical) No clocks, No refresh All inputs and outputs are TTL compatible. Easy memory expansion by CS1#, CS2, LB# and UB# Common Data I/O Three-state outputs: OR-tie Capability OE# prevents data contention on the I/O bus Ordering Information Type No. R1LV3216RSA-5S% R1LV3216RSA-7S% R1LV3216RSD-5S% R1LV3216RSD-7S% Access time 55 ns*1 70 ns 55 ns*1 70 ns Package 12mm x 20mm 48-pin plastic TSOP (I) (normal-bend type) (48P3R) 350 mil 52-pin plastic μ-TSOP (II) (normal-bend type) (52PTG) Note1. 55ns parts can be supported under the condition of the input timing limitation toward SRAM on customer’s system. Please contact our sales office in your region, in case of the inquiry for 55ns parts. % - Temperature version; see table below Temperature Range 0 ~ +70 °C -40 ~ +85 °C % R I REJ03C0367-0001, Rev.0.01, 2008.03.24 Page 1 of 16 R1LV3216R Series Preliminary Pin Arrangement A15 A14 A13 A12 A11 A10 A9 A8 A19 CS1# WE# NC NC Vcc CS2 NC A20 A18 A17 A7 A6 A5 A4 A3 A2 A1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 52 51 50 49 48 47 46 45 44 43 42 41 A16 BYTE# UB# Vss LB# DQ15/A-1 DQ7 DQ14 DQ6 DQ13 DQ5 DQ12 DQ4 NC DQ11 DQ3 DQ10 DQ2 DQ9 DQ1 DQ8 DQ0 OE# Vss NC A0 52-pin μTSOP (II) 40 39 38 37 36 35 34 33 32 31 30 29 28 27 A15 A14 A13 A12 A11 A10 A9 A8 A19 A20 WE# CS2 NC UB# LB# A18 A17 A7 A6 A5 A4 A3 A2 A1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 48 47 46 45 44 43 42 41 40 39 A16 BYTE# Vss DQ15/A-1 DQ7 DQ14 DQ6 DQ13 DQ5 DQ12 DQ4 Vcc DQ11 DQ3 DQ10 DQ2 DQ9 DQ1 DQ8 DQ0 OE# Vss CS1# A0 48-pin TSOP (I) 38 37 36 35 34 33 32 31 30 29 28 27 26 25 REJ03C0367-0001, Rev.0.01, 2008.03.24 Page 2 of 16 R1LV3216R Series Preliminary Pin Description Pin name Vcc Vss A0 to A20 A-1 to A20 DQ0 to DQ15 CS1# CS2 WE# OE# LB# UB# BYTE# NC Function Power supply Ground Address input (word mode) Address input (byte mode) Data input/output Chip select 1 Chip select 2 Write enable Output enable Lower byte enable Upper byte enable Byte control mode enable Non connection REJ03C0367-0001, Rev.0.01, 2008.03.24 Page 3 of 16 R1LV3216R Series Preliminary Block Diagram A0 A1 ADDRESS BUFFER ROW DECODER MEMORY ARRAY 2M-word x16-bit or 4M-word x 8-bit DQ0 DQ1 DQ BUFFER DATA A20 DQ7 DQ8 SENSE / WRITE AMPLIFIER SELECTOR COLUMN DECODER DQ BUFFER DQ9 CLOCK CS2 CS1# LB# UB# BYTE# WE# OE# GENERATOR DQ15 / A -1 X8 / x16 CONTROL Vcc Vss REJ03C0367-0001, Rev.0.01, 2008.03.24 Page 4 of 16 R1LV3216R Series Preliminary Operation Table CS1# H X X L L L L L L L L L L CS2 X L X H H H H H H H H H H BYTE# X X H H H H H H H H L L L LB# X X H L L H H L L L L L L UB# X X H H H L L L L L L L L WE# X X X L H L H L H H L H H OE# X X X X L X L X L H X L H DQ0~7 High-Z High-Z High-Z Din Dout High-Z High-Z Din Dout High-Z Din Dout High-Z DQ8~14 High-Z High-Z High-Z High-Z High-Z Din Dout Din Dout High-Z High-Z High-Z High-Z DQ15 High-Z High-Z High-Z High-Z High-Z Din Dout Din Dout High-Z A-1 A-1 A-1 Operation Stand-by Stand-by Stand-by Write in lower byte Read in lower byte Write in upper byte Read in upper byte Word write Word read Output disable Byte write Byte read Output disable Note 1. H: VIH L:VIL X: VIH or VIL 2. When apply BYTE# =“L”, please assign LB#=UB#=“L”. Absolute Maximum Ratings Parameter Power supply voltage relative to Vss Terminal voltage on any pin relative to Vss Power dissipation Operation temperature Storage temperature range Storage temperature range under bias Symbol Vcc VT PT Topr*3 Tstg Tbias*3 R ver. I ver. R ver. I ver. Value -0.5 to +4.6 -0.5*1 to Vcc+0.3*2 0.7 0 to +70 -40 to +85 -65 to 150 0 to +70 -40 to +85 unit V V W °C °C °C °C °C Note 1. –2.0V in case of AC (Pulse width ≤30ns) 2. Maximum voltage is +4.6V. 3. Ambient temperature range depends on R/I-version. Please see table on page 1. REJ03C0367-0001, Rev.0.01, 2008.03.24 Page 5 of 16 R1LV3216R Series Preliminary Recommended Operating Conditions Parameter Supply voltage Input high voltage Input low voltage Ambient temperature range R ver. Symbol Vcc Vss VIH VIL Min. 2.7 0 2.4 -0.2 0 Typ. 3.0 0 Max. 3.6 0 Vcc+0.2 Unit V V V V °C Note 0.4 +70 Ta I ver. -40 +85 °C Note 1. –2.0V in case of AC (Pulse width ≤ 30ns) 2. Ambient temperature range depends on R/I-version. Please see table on page 1. 1 2 2 DC Characteristics Parameter Input leakage current Output leakage current Symbol | ILI | Min. Typ. Max. 1 Unit μA μA Test conditions Vin = Vss to Vcc BYTE# ≥ Vcc -0.2V or BYTE# ≤ 0.2V CS1# =VIH or CS2 =VIL or OE# =VIH or WE# =VIL or LB# = UB# =VIH, VI/O =Vss to Vcc Min. cycle, duty =100%, II/O = 0mA BYTE# ≥ Vcc -0.2V or BYTE# ≤ 0.2V CS1# =VIL, CS2 =VIH, Others = VIH/VIL Cycle =1μs, duty =100%, II/O = 0mA BYTE# ≥ Vcc -0.2V or BYTE# ≤ 0.2V CS1# ≤ 0.2V, CS2 ≥ VCC-0.2V, VIH ≥ VCC-0.2V, VIL ≤ 0.2V BYTE# ≥ Vcc -0.2V or BYTE# ≤ 0.2V CS2 =VIH Vin ≥ 0V ~+25°C BYTE# ≥ Vcc -0.2V or BYTE# ≤ 0.2V ~+40°C (1) 0V ≤ CS2 ≤ 0.2V or (2) CS1# ≥ VCC-0.2V, CS2 ≥ VCC-0.2V or ~+70°C (3) LB# = UB# ≥ VCC-0.2V, CS1# ≤ 0.2V, ~+85°C CS2 ≥ VCC-0.2V BYTE# ≥ Vcc -0.2V or BYTE# ≤ 0.2V IOH = -0.5mA BYTE# ≥ Vcc -0.2V or BYTE# ≤ 0.2V IOL = 2mA | ILO | - - 1 Average operating current ICC1 40*1 55 mA ICC2 - 3*1 8 mA Standby current Standby current ISB - 0.1*1 4*1 7*2 - 0.3 12 24 50 80 0.4 mA μA μA μA μA V V ISB1 Output high voltage Output low voltage VOH VOL 2.4 - Note 1. Typical parameter indicates the value for the center of distribution at 3.0V (Ta= 25ºC), and not 100% tested. 2. Typical parameter indicates the value for the center of distribution at 3.0V (Ta= 40ºC), and not 100% tested. REJ03C0367-0001, Rev.0.01, 2008.03.24 Page 6 of 16 R1LV3216R Series Preliminary Capacitance (Ta =25°C, f =1MHz) Parameter Symbol Min. Typ. Input capacitance C in Input / output capacitance C I/O Note1.This parameter is sampled and not 100% tested. Max. 10 10 Unit pF pF Test conditions Vin =0V V I/O =0V Note 1 1 AC Characteristics Test Conditions (Vcc = 2.7V ~ 3.6V, Ta = 0 ~ +70°C / -40 ~ +85°C*1) • • • • Input pulse levels: VIL = 0.4V, VIH = 2.4V Input rise and fall time: 5ns Input and output timing reference level: 1.4V Output load: See figures (Including scope and jig) 1.4V RL = 500 ohm DQ CL = 30 pF Note1. Ambient temperature range depends on R/I-version. Please see table on page 1. REJ03C0367-0001, Rev.0.01, 2008.03.24 Page 7 of 16 R1LV3216R Series Read Cycle R1LV3216R**-5S Preliminary Parameter Read cycle time Address access time Chip select access time Output enable to output valid Output hold from address change LB#, UB# access time Chip select to output in low-Z LB#, UB# enable to low-Z Output enable to output in low-Z Chip deselect to output in high-Z LB#, UB# disable to high-Z Output disable to output in high-Z Symbol tRC tAA tACS1 tACS2 tOE tOH tBA tCLZ1 tCLZ2 tBLZ tOLZ tCHZ1 tCHZ2 tBHZ tOHZ (Note 0) Min. 55 10 10 10 5 5 0 0 0 0 Max. 70 55 55 25 55 20 20 20 20 R1LV3216R**-7S Unit ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns Note Min. 70 10 10 10 5 5 0 0 0 0 Max. 70 70 70 35 70 25 25 25 25 2,3 2,3 2,3 2,3 1,2,3 1,2,3 1,2,3 1,2,3 REJ03C0367-0001, Rev.0.01, 2008.03.24 Page 8 of 16 R1LV3216R Series Write Cycle R1LV3216R**-5S Preliminary Parameter Write cycle time Address valid to end of write Chip select to end of write Write pulse width LB#, UB# valid to end of write Address setup time Write recovery time Data to write time overlap Data hold from write time Output enable from end of write Output disable to output in high-Z Write to output in high-Z Symbol tWC tAW tCW tWP tBW tAS tWR tDW tDH tOW tOHZ tWHZ (Note 0) Min. 55 50 50 40 50 0 0 25 0 5 0 0 Max. 20 20 R1LV3216R**-7S Unit ns ns ns ns ns ns ns ns ns ns ns ns Note Min. 70 65 65 55 65 0 0 35 0 5 0 0 Max. 25 25 5 4 6 7 2 1,2 1,2 Note0. 55ns parts can be supported under the condition of the input timing limitation toward SRAM on customer’s system. Please contact our sales office in your region, in case of the inquiry for 55ns parts. In case of tAA =70ns, tRC =70ns. 1. tCHZ, tOHZ, tWHZ and tBHZ are defined as the time at which the outputs achieve the open circuit conditions and are not referred to output voltage levels. 2. This parameter is sampled and not 100% tested. 3. At any given temperature and voltage condition, tHZ max is less than tLZ min both for a given device and from device to device. 4. A write occurs during the overlap of a low CS1#, a high CS2, a low WE# and a low LB# or a low UB#. A write begins at the latest transition among CS1# going low, CS2 going high, WE# going low and LB# going low or UB# going low . A write ends at the earliest transition among CS1# going high, CS2 going low, WE# going high and LB# going high or UB# going high. tWP is measured from the beginning of write to the end of write. 5. tCW is measured from the later of CS1# going low or CS2 going high to end of write. 6. tAS is measured the address valid to the beginning of write. 7. tWR is measured from the earliest of CS1# or WE# going high or CS2 going low to the end of write cycle. REJ03C0367-0001, Rev.0.01, 2008.03.24 Page 9 of 16 R1LV3216R Series BYTE# Timing Conditions Parameter Byte setup time Byte recovery time Symbol tBS tBR R1LV3216R**-5S R1LV3216R**-7S Preliminary Min. 5 5 Max. - Min. 5 5 Max. - Unit ms ms Note BYTE# Timing Waveforms CS1# CS2 tBS BYTE# tBR REJ03C0367-0001, Rev.0.01, 2008.03.24 Page 10 of 16 R1LV3216R Series Preliminary Timing Waveforms Read Cycle*1 tRC A0~20 (Word Mode) A -1~20 (Byte Mode) tAA tBA tBLZ tACS1 tCLZ1 tOH LB#,UB# tBHZ CS1# tCHZ1 CS2 tCLZ2 WE# WE# = “H” level VIH VIL tACS2 tCHZ2 OE# tOLZ DQ0~15 (Word Mode) tOE tOHZ High impedance Valid Data DQ0~7 (Byte Mode) Note1. BYTE# ≥ Vcc – 0.2V or BYTE# ≤ 0.2V REJ03C0367-0001, Rev.0.01, 2008.03.24 Page 11 of 16 R1LV3216R Series Write Cycle (1)*1 (WE# CLOCK) Preliminary tWC A0~20 (Word Mode) A -1~20 (Byte Mode) tOH tBW LB#,UB# tCW CS1# tCW CS2 tAW tAS WE# tWP tWR OE# tWHZ tOHZ DQ0~15 (Word Mode) tOLZ tOW Valid Data tDW tDH DQ0~7 (Byte Mode) Note1. BYTE# ≥ Vcc – 0.2V or BYTE# ≤ 0.2V REJ03C0367-0001, Rev.0.01, 2008.03.24 Page 12 of 16 R1LV3216R Series Write Cycle (2)*1 (CS1#, CS2 CLOCK) Preliminary tWC A0~20 (Word Mode) A -1~20 (Byte Mode) tAW tBW LB#,UB# tAS tCW tWR CS1# tAS CS2 tWP WE# tCW tWR OE# OE# = “H” level VIH VIL tDW DQ0~15 (Word Mode) tDH DQ0~7 (Byte Mode) Valid Data Note1. BYTE# ≥ Vcc – 0.2V or BYTE# ≤ 0.2V REJ03C0367-0001, Rev.0.01, 2008.03.24 Page 13 of 16 R1LV3216R Series Write Cycle (3)*1 (LB#, UB# CLOCK) Preliminary tWC A0~20 (Word Mode) A -1~20 (Byte Mode) tAW tAS tBW tWR LB#,UB# tCW CS1# tCW CS2 tWP WE# OE# OE# = “H” level VIH VIL tDW DQ0~15 (Word Mode) tDH DQ0~7 (Byte Mode) Valid Data Note1. BYTE# ≥ Vcc – 0.2V or BYTE# ≤ 0.2V REJ03C0367-0001, Rev.0.01, 2008.03.24 Page 14 of 16 R1LV3216R Series Preliminary Low Vcc Data Retention Characteristics Parameter Symbol Min. Typ. Max. Unit Test conditions*3 Vin ≥ 0V BYTE# ≥ Vcc -0.2V or BYTE# ≤ 0.2V (1) 0V ≤ CS2 ≤ 0.2V or (2) CS1# ≥ VCC-0.2V, CS2 ≥ VCC-0.2V or (3) LB# = UB# ≥ VCC-0.2V, CS1# ≤ 0.2V, CS2 ≥ VCC-0.2V Vin ≥ 0V ~+25°C BYTE# ≥ Vcc -0.2V or BYTE# ≤ 0.2V ~+40°C (1) 0V ≤ CS2 ≤ 0.2V or (2) CS1# ≥ VCC-0.2V, CS2 ≥ VCC-0.2V or ~+70°C (3) LB# = UB# ≥ VCC-0.2V, CS1# ≤ 0.2V, ~+85°C CS2 ≥ VCC-0.2V See retention waveform. VCC for data retention VDR 2.0 - 3.6 V Data retention current ICCDR Chip select to data retention time Operation recovery time tCDR tR 0 5 4*1 7*2 - 12 24 50 80 - μA μA μA μA ns ms Note 1. Typical parameter indicates the value for the center of distribution at 3.0V (Ta= 25ºC), and not 100% tested. 2. Typical parameter indicates the value for the center of distribution at 3.0V (Ta= 40ºC), and not 100% tested. 3. CS2 also controls address buffer, WE# buffer ,CS1# buffer ,OE# buffer ,LB# ,UB# buffer and Din buffer. If CS2 controls data retention mode, Vin levels (address, WE# ,OE#,CS1#,LB#,UB#,I/O) can be in the high impedance state. If CS1# controls data retention mode, CS2 must be CS2 ≥ Vcc-0.2V or0V ≤ CS2 ≤ 0.2V. The other input levels (address, WE# ,OE#,CS1#,LB#,UB#,I/O) can be in the high impedance state. REJ03C0367-0001, Rev.0.01, 2008.03.24 Page 15 of 16 R1LV3216R Series Low Vcc Data Retention Timing Waveforms*1 (1) CS1# Controlled Vcc Preliminary tCDR 2.2V 2.7V 2.7V tR 2.2V VDR CS1# ≥ Vcc - 0.2V CS1# (2) CS2 Controlled Vcc CS2 tCDR 2.7V 2.7V tR VDR 0.6V 0.6V 0V ≤ CS2 ≤ 0.2V (3) LB#, UB Controlled Vcc tCDR 2.2V LB#, UB# 2.7V 2.7V tR 2.2V VDR LB#, UB# ≥ Vcc - 0.2V Note1. BYTE# ≥ Vcc – 0.2V or BYTE# ≤ 0.2V REJ03C0367-0001, Rev.0.01, 2008.03.24 Page 16 of 16 Revision History R1LV3216R Series Data Sheet Contents of Revision Description Rev. 0.01 Date Mar.24, 2008 Page - Initial issue: Preliminary Data Sheet Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Notes: 1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use. Renesas neither makes warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property rights or any other rights of Renesas or any third party with respect to the information in this document. 2. Renesas shall have no liability for damages or infringement of any intellectual property or other rights arising out of the use of any information in this document, including, but not limited to, product data, diagrams, charts, programs, algorithms, and application circuit examples. 3. You should not use the products or the technology described in this document for the purpose of military applications such as the development of weapons of mass destruction or for the purpose of any other military use. When exporting the products or technology described herein, you should follow the applicable export control laws and regulations, and procedures required by such laws and regulations. 4. All information included in this document such as product data, diagrams, charts, programs, algorithms, and application circuit examples, is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas products listed in this document, please confirm the latest product information with a Renesas sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas such as that disclosed through our website. (http://www.renesas.com ) 5. Renesas has used reasonable care in compiling the information included in this document, but Renesas assumes no liability whatsoever for any damages incurred as a result of errors or omissions in the information included in this document. 6. When using or otherwise relying on the information in this document, you should evaluate the information in light of the total system before deciding about the applicability of such information to the intended application. Renesas makes no representations, warranties or guaranties regarding the suitability of its products for any particular application and specifically disclaims any liability arising out of the application and use of the information in this document or Renesas products. 7. With the exception of products specified by Renesas as suitable for automobile applications, Renesas products are not designed, manufactured or tested for applications or otherwise in systems the failure or malfunction of which may cause a direct threat to human life or create a risk of human injury or which require especially high quality and reliability such as safety systems, or equipment or systems for transportation and traffic, healthcare, combustion control, aerospace and aeronautics, nuclear power, or undersea communication transmission. If you are considering the use of our products for such purposes, please contact a Renesas sales office beforehand. Renesas shall have no liability for damages arising out of the uses set forth above. 8. Notwithstanding the preceding paragraph, you should not use Renesas products for the purposes listed below: (1) artificial life support devices or systems (2) surgical implantations (3) healthcare intervention (e.g., excision, administration of medication, etc.) (4) any other purposes that pose a direct threat to human life Renesas shall have no liability for damages arising out of the uses set forth in the above and purchasers who elect to use Renesas products in any of the foregoing applications shall indemnify and hold harmless Renesas Technology Corp., its affiliated companies and their officers, directors, and employees against any and all damages arising out of such applications. 9. You should use the products described herein within the range specified by Renesas, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas shall have no liability for malfunctions or damages arising out of the use of Renesas products beyond such specified ranges. 10. Although Renesas endeavors to improve the quality and reliability of its products, IC products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Please be sure to implement safety measures to guard against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other applicable measures. Among others, since the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 11. In case Renesas products listed in this document are detached from the products to which the Renesas products are attached or affixed, the risk of accident such as swallowing by infants and small children is very high. You should implement safety measures so that Renesas products may not be easily detached from your products. Renesas shall have no liability for damages arising out of such detachment. 12. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written approval from Renesas. 13. Please contact a Renesas sales office if you have any questions regarding the information contained in this document, Renesas semiconductor products, or if you have any other inquiries. RENESAS SALES OFFICES Refer to "http://www.renesas.com/en/network" for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: (408) 382-7500, Fax: (408) 382-7501 Renesas Technology Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K. Tel: (1628) 585-100, Fax: (1628) 585-900 Renesas Technology (Shanghai) Co., Ltd. Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120 Tel: (21) 5877-1818, Fax: (21) 6887-7858/7898 Renesas Technology Hong Kong Ltd. 7th Floor, North Tower, World Finance Centre, Harbour City, Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: 2265-6688, Fax: 2377-3473 Renesas Technology Taiwan Co., Ltd. 10th Floor, No.99, Fushing North Road, Taipei, Taiwan Tel: (2) 2715-2888, Fax: (2) 3518-3399 Renesas Technology Singapore Pte. Ltd. 1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: 6213-0200, Fax: 6278-8001 Renesas Technology Korea Co., Ltd. Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea Tel: (2) 796-3115, Fax: (2) 796-2145 http://www.renesas.com Renesas Technology Malaysia Sdn. Bhd Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: 7955-9390, Fax: 7955-9510 © 2008. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon .7.2