To our customers,
Old Company Name in Catalogs and Other Documents
On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology
Corporation, and Renesas Electronics Corporation took over all the business of both
companies. Therefore, although the old company name remains in this document, it is a valid
Renesas Electronics document. We appreciate your understanding.
Renesas Electronics website: http://www.renesas.com
April 1st, 2010
Renesas Electronics Corporation
Issued by: Renesas Electronics Corporation (http://www.renesas.com)
Send any inquiries to http://www.renesas.com/inquiry.
Notice
1.
2.
3.
4.
5.
6.
7.
All information included in this document is current as of the date this document is issued. Such information, however, is
subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please
confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to
additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website.
Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights
of third parties by or arising from the use of Renesas Electronics products or technical information described in this document.
No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights
of Renesas Electronics or others.
You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.
Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of
semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software,
and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by
you or third parties arising from the use of these circuits, software, or information.
When exporting the products or technology described in this document, you should comply with the applicable export control
laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas
Electronics products or the technology described in this document for any purpose relating to military applications or use by
the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and
technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited
under any applicable domestic or foreign laws or regulations.
Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics
does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages
incurred by you resulting from errors in or omissions from the information included herein.
Renesas Electronics products are classified according to the following three quality grades: “Standard”, “High Quality”, and
“Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as
indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular
application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior
written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for
which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way
liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an
application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written
consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise
expressly specified in a Renesas Electronics data sheets or data books, etc.
“Standard”:
8.
9.
10.
11.
12.
Computers; office equipment; communications equipment; test and measurement equipment; audio and visual
equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots.
“High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anticrime systems; safety equipment; and medical equipment not specifically designed for life support.
“Specific”:
Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or
systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare
intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life.
You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics,
especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation
characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or
damages arising out of the use of Renesas Electronics products beyond such specified ranges.
Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have
specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further,
Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to
guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a
Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire
control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because
the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system
manufactured by you.
Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental
compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable
laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS
Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with
applicable laws and regulations.
This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas
Electronics.
Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this
document or Renesas Electronics products, or if you have any other inquiries.
(Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majorityowned subsidiaries.
(Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.
R1RP0416DI Series
Wide Temperature Range Version
4M High Speed SRAM (256-kword × 16-bit)
REJ03C0110-0100Z
Rev. 1.00
Mar.12.2004
Description
The R1RP0416DI Series is a 4-Mbit high speed static RAM organized 256-k word × 16-bit. It has realized
high speed access time by employing CMOS process (6-transistor memory cell) and high speed circuit
designing technology. It is most appropriate for the application which requires high speed, high density
memory and wide bit width configuration, such as cache and buffer memory in system. It is packaged in
400-mil 44-pin plastic SOJ and 400-mil 44-pin plastic TSOPII.
Features
• Single 5.0 V supply: 5.0 V ± 10%
• Access time: 12 ns (max)
• Completely static memory
No clock or timing strobe required
• Equal access and cycle times
• Directly TTL compatible
All inputs and outputs
• Operating current: 160 mA (max)
• TTL standby current: 40 mA (max)
• CMOS standby current: 5 mA (max)
• Center VCC and VSS type pin out
• Temperature range: −40 to +85°C
Ordering Information
Type No.
Access time
Package
R1RP0416DGE-2PI
12 ns
400-mil 44-pin plastic SOJ (44P0K)
R1RP0416DSB-2PI
12 ns
400-mil 44-pin plastic TSOPII (44P3W-H)
Rev.1.00, Mar.12.2004, page 1 of 12
R1RP0416DI Series
Pin Arrangement
44-pin SOJ
A0
A1
A2
A3
A4
CS#
I/O1
I/O2
I/O3
I/O4
VCC
VSS
I/O5
I/O6
I/O7
I/O8
WE#
A5
A6
A7
A8
A9
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
44
43
42
41
40
39
38
37
36
35
34
33
32
31
30
29
28
27
26
25
24
23
44-pin TSOP
A17
A16
A15
OE#
UB#
LB#
I/O16
I/O15
I/O14
I/O13
VSS
VCC
I/O12
I/O11
I/O10
I/O9
NC
A14
A13
A12
A11
A10
A0
A1
A2
A3
A4
CS#
I/O1
I/O2
I/O3
I/O4
VCC
VSS
I/O5
I/O6
I/O7
I/O8
WE#
A5
A6
A7
A8
A9
(Top View)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
(Top View)
Pin Description
Pin name
Function
A0 to A17
Address input
I/O1 to I/O16
Data input/output
CS#
Chip select
OE#
Output enable
WE#
Write enable
UB#
Upper byte select
LB#
Lower byte select
VCC
Power supply
VSS
Ground
NC
No connection
Rev.1.00, Mar.12.2004, page 2 of 12
44
43
42
41
40
39
38
37
36
35
34
33
32
31
30
29
28
27
26
25
24
23
A17
A16
A15
OE#
UB#
LB#
I/O16
I/O15
I/O14
I/O13
VSS
VCC
I/O12
I/O11
I/O10
I/O9
NC
A14
A13
A12
A11
A10
R1RP0416DI Series
Block Diagram
(LSB)
A14
A13
A12
A5
A6
A7
A11
A10
A3
A1
(MSB)
Row
decoder
Internal
voltage VCC
generator
VSS
1024-row × 32-column ×
8-block × 16-bit
(4,194,304 bits)
CS
I/O1
..
.
I/O8
Column I/O
Input
data
control
I/O9
..
.
I/O16
Column decoder
CS
(LSB) A8 A9 A17 A15 A16 A0 A2 A4 (MSB)
WE#
CS#
LB#
UB#
OE#
CS
Rev.1.00, Mar.12.2004, page 3 of 12
R1RP0416DI Series
Operation Table
CS# OE# WE# LB# UB# Mode
VCC current
I/O1−
−I/O8
I/O9−
−I/O16
Ref. cycle
H
×
×
×
×
Standby
ISB, ISB1
High-Z
High-Z
L
H
H
×
×
Output disable
ICC
High-Z
High-Z
L
L
H
L
L
Read
ICC
Output
Output
Read cycle
L
L
H
L
H
Lower byte read ICC
Output
High-Z
Read cycle
L
L
H
H
L
Upper byte read ICC
High-Z
Output
Read cycle
L
L
H
H
H
ICC
High-Z
High-Z
L
×
L
L
L
Write
ICC
Input
Input
Write cycle
L
×
L
L
H
Lower byte write ICC
Input
High-Z
Write cycle
L
×
L
H
L
Upper byte write ICC
High-Z
Input
Write cycle
L
×
L
H
H
High-Z
High-Z
ICC
Note: H: VIH, L: VIL, ×: VIH or VIL
Absolute Maximum Ratings
Parameter
Symbol
Value
Supply voltage relative to VSS
VCC
−0.5 to +7.0
Voltage on any pin relative to VSS
VT
−0.5* to VCC + 0.5*
Power dissipation
PT
1.0
W
Operating temperature
Topr
−40 to +85
°C
Storage temperature
Tstg
−55 to +125
°C
Storage temperature under bias
Tbias
−40 to +85
°C
1
Notes: 1. VT (min) = −2.0 V for pulse width (under shoot) ≤ 6 ns.
2. VT (max) = VCC + 2.0 V for pulse width (over shoot) ≤ 6 ns.
Rev.1.00, Mar.12.2004, page 4 of 12
Unit
V
2
V
R1RP0416DI Series
Recommended DC Operating Conditions
(Ta = −40 to +85°C)
Parameter
Symbol
Supply voltage
Min
Typ
Max
Unit
3
4.5
5.0
5.5
V
4
0
0
0
VIH
2.2
VCC + 0.5*
VIL
−0.5*
0.8
VCC*
VSS*
Input voltage
Notes: 1.
2.
3.
4.
1
V
2
V
V
VIL (min) = −2.0 V for pulse width (under shoot) ≤ 6 ns.
VIH (max) = VCC + 2.0 V for pulse width (over shoot) ≤ 6 ns.
The supply voltage with all VCC pins must be on the same level.
The supply voltage with all VSS pins must be on the same level.
DC Characteristics
(Ta = −40 to +85°C, VCC = 5.0 V ± 10%, VSS = 0 V)
Parameter
Input leakage current
Symbol
Min
Max
Unit
Test conditions
|ILI|
2
µA
VIN = VSS to VCC
|ILO|
2
µA
VIN = VSS to VCC
Operating power supply current
ICC
160
mA
CS# = VIL, IOUT = 0 mA
Other inputs = VIH/VIL
Standby power supply current
ISB
40
mA
CS# = VIH,
Other inputs = VIH/VIL
ISB1
5
mA
VCC ≥ CS# ≥ VCC − 0.2 V,
Output leakage current*
1
(1) 0 V ≤ VIN ≤ 0.2 V or
(2) VCC ≥ VIN ≥ VCC − 0.2 V
Output voltage
VOL
0.4
V
IOL = 8 mA
VOH
2.4
V
IOH = −4 mA
Capacitance
(Ta = +25°C, f = 1.0 MHz)
Parameter
Input capacitance*
1
Input/output capacitance*
Note:
1
Symbol
Min
Max
Unit
Test conditions
CIN
6
pF
VIN = 0 V
CI/O
8
pF
VI/O = 0 V
1. This parameter is sampled and not 100% tested.
Rev.1.00, Mar.12.2004, page 5 of 12
R1RP0416DI Series
AC Characteristics
(Ta = −40 to +85°C, VCC = 5.0 V ± 10%, unless otherwise noted.)
Test Conditions
• Input pulse levels: 3.0 V/0.0 V
• Input rise and fall time: 3 ns
• Input and output timing reference levels: 1.5 V
• Output load: See figures (Including scope and jig)
1.5 V
DOUT Zo = 50 Ω
5V
RL = 50 Ω
480 Ω
DOUT
255 Ω
30 pF
Output load (A)
5 pF
Output load (B)
(for tCLZ, tOLZ, tBLZ, tCHZ, tOHZ,
tBHZ, tWHZ, and tOW)
Read Cycle
R1RP0416DI
-2
Parameter
Symbol
Min
Max
Unit
Read cycle time
tRC
12
ns
Address access time
tAA
12
ns
Chip select access time
tACS
12
ns
Output enable to output valid
tOE
6
ns
Byte select to output valid
tBA
6
ns
Output hold from address change
tOH
3
ns
Chip select to output in low-Z
tCLZ
3
ns
Output enable to output in low-Z
tOLZ
0
ns
1
Byte select to output in low-Z
tBLZ
0
ns
1
Chip deselect to output in high-Z
tCHZ
6
ns
1
Output disable to output in high-Z
tOHZ
6
ns
1
Byte deselect to output in high-Z
tBHZ
6
ns
1
Rev.1.00, Mar.12.2004, page 6 of 12
Notes
1
R1RP0416DI Series
Write Cycle
R1RP0416DI
-2
Parameter
Symbol
Min
Max
Unit
Notes
Write cycle time
tWC
12
ns
Address valid to end of write
tAW
8
ns
Chip select to end of write
tCW
8
ns
8
Write pulse width
tWP
8
ns
7
Byte select to end of write
tBW
8
ns
Address setup time
tAS
0
ns
5
Write recovery time
tWR
0
ns
6
Data to write time overlap
tDW
6
ns
Data hold from write time
tDH
0
ns
Write disable to output in low-Z
tOW
3
ns
1
Output disable to output in high-Z
tOHZ
6
ns
1
Write enable to output in high-Z
tWHZ
6
ns
1
Notes: 1. Transition is measured ±200 mV from steady voltage with output load (B). This parameter is
sampled and not 100% tested.
2. If the CS# or LB# or UB# low transition occurs simultaneously with the WE# low transition or
after the WE# transition, output remains a high impedance state.
3. WE# and/or CS# must be high during address transition time.
4. If CS#, OE#, LB# and UB# are low during this period, I/O pins are in the output state. Then the
data input signals of opposite phase to the outputs must not be applied to them.
5. tAS is measured from the latest address transition to the latest of CS#, WE#, LB# or UB# going
low.
6. tWR is measured from the earliest of CS#, WE#, LB# or UB# going high to the first address
transition.
7. A write occurs during the overlap of a low CS#, a low WE# and a low LB# or a low UB# (tWP). A
write begins at the latest transition among CS# going low, WE# going low and LB# going low or
UB# going low. A write ends at the earliest transition among CS# going high, WE# going high
and LB# going high or UB# going high.
8. tCW is measured from the later of CS# going low to the end of write.
Rev.1.00, Mar.12.2004, page 7 of 12
R1RP0416DI Series
Timing Waveforms
Read Timing Waveform (1) (WE# = VIH)
t RC
Address
Valid address
tAA
tACS
CS#
tOE
tCHZ *1
tBA
tOHZ *1
tBLZ *1
tBHZ *1
OE#
LB#, UB#
tOLZ *1
tOH
tCLZ *1
DOUT
High impedance *4
Rev.1.00, Mar.12.2004, page 8 of 12
Valid data
*4
R1RP0416DI Series
Read Timing Waveform (2) (WE# = VIH, LB# = VIL, UB# = VIL)
tRC
Address
Valid address
tOH
tAA
tACS
tCHZ*1
CS#
tOE
tOHZ*1
OE#
tOLZ*1
tCLZ*1
DOUT
High impedance *4
Rev.1.00, Mar.12.2004, page 9 of 12
Valid data
*4
R1RP0416DI Series
Write Timing Waveform (1) (WE# Controlled)
tWC
Valid address
Address
tWR
tAW
tAS
tWP
WE#*3
tCW
CS#*3
OE#
tBW
LB#, UB#
tOLZ
tWHZ
tOW
tOHZ
High impedance
DOUT
*2
DIN
Rev.1.00, Mar.12.2004, page 10 of 12
tDW
tDH
Valid data
R1RP0416DI Series
Write Timing Waveform (2) (CS# Controlled)
tWC
Valid address
Address
tWR
tAW
tAS
tWP
WE# *3
tCW
CS# *3
OE#
tBW
LB#, UB#
tOLZ
tWHZ
tOW
tOHZ
High impedance *
DOUT
*2
DIN
Rev.1.00, Mar.12.2004, page 11 of 12
tDW
tDH
Valid data
4
R1RP0416DI Series
Write Timing Waveform (3) (LB#, UB# Controlled, OE# = VIH)
tWC
Address
Valid address
tAW
tWR
tWP
WE#*3
tCW
CS#*3
tAS
tBW
UB# (LB#)
tBW
LB# (UB#)
tDW
DIN-UB
(DIN-LB)
tDH
Valid data
tDW
DIN-LB
(DIN-UB)
DOUT
Rev.1.00, Mar.12.2004, page 12 of 12
tDH
Valid data
High impedance
Revision History
Rev.
Date
R1RP0416DI Series Data Sheet
Contents of Modification
Page
Description
0.01
Sep. 30, 2003
Initial issue
1.00
Mar.12.2004
Deletion of Preliminary
Sales Strategic Planning Div.
Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
Keep safety first in your circuit designs!
1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble
may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage.
Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary
circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap.
Notes regarding these materials
1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's
application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party.
2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data,
diagrams, charts, programs, algorithms, or circuit application examples contained in these materials.
3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of
publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is
therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product
information before purchasing a product listed herein.
The information described here may contain technical inaccuracies or typographical errors.
Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors.
Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor
home page (http://www.renesas.com).
4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to
evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes
no responsibility for any damage, liability or other loss resulting from the information contained herein.
5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life
is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a
product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater
use.
6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials.
7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and
cannot be imported into a country other than the approved destination.
Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited.
8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein.
http://www.renesas.com
RENESAS SALES OFFICES
Renesas Technology America, Inc.
450 Holger Way, San Jose, CA 95134-1368, U.S.A
Tel: (408) 382-7500 Fax: (408) 382-7501
Renesas Technology Europe Limited.
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, United Kingdom
Tel: (1628) 585 100, Fax: (1628) 585 900
Renesas Technology Europe GmbH
Dornacher Str. 3, D-85622 Feldkirchen, Germany
Tel: (89) 380 70 0, Fax: (89) 929 30 11
Renesas Technology Hong Kong Ltd.
7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Hong Kong
Tel: 2265-6688, Fax: 2375-6836
Renesas Technology Taiwan Co., Ltd.
FL 10, #99, Fu-Hsing N. Rd., Taipei, Taiwan
Tel: (2) 2715-2888, Fax: (2) 2713-2999
Renesas Technology (Shanghai) Co., Ltd.
26/F., Ruijin Building, No.205 Maoming Road (S), Shanghai 200020, China
Tel: (21) 6472-1001, Fax: (21) 6415-2952
Renesas Technology Singapore Pte. Ltd.
1, Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632
Tel: 6213-0200, Fax: 6278-8001
© 2003, 2004. Renesas Technology Corp., All rights reserved. Printed in Japan.
Colophon .1.0