RD74HV8T06

RD74HV8T06 High-Voltage 8-bit Inverter Buffer (with Open Drain Outputs) REJ03D0900-0100 Rev.1.00 Jul 14, 2008 Description The RD74HV8T06 has eight Inverter (with open drain outputs) in a 20 pin package. The voltage of maximum 30 V can be impressed to the drain-source voltage. Supports the wide power supply voltage and can use it for the other use as a general–purpose driver. Features • • • • • • Wide supply voltage range : 4.5 to 30 V Output voltage : VDS (Max.) = 30 V Operating temperature range : –40 to +85°C All inputs VIH (Min.) = 2.4 V, VIL (Max.) = 0.8 V (@VCC = 10 V to 30 V) Output current : IO short (Typ.) = 70 mA (@VCC = 15 V) Ordering Information Part Name RD74HV8T06FPH0 RD74HV8T06TH0 Note: Package Type SOP-20 pin (JEITA) TSSOP-20 pin Package Code (Previous Code) PRSP0020DD-B (FP-20DAV) PTSP0020JB-A (TTP-20DAV) Package Abbreviation FP T Packing Abbreviation (Quantity) H (2,000 pcs/reel) H (2,000 pcs/reel) Surface Treatment 0 (Ni/Pd/Au) 0 (Ni/Pd/Au) Please consult the sales office for the above package availability. Pin Arrangement VCC 1 IN0 2 IN1 3 IN2 4 IN3 5 IN4 6 IN5 7 IN6 8 IN7 9 GND 10 (Top view) 20 VCC 19 OUT0 18 OUT1 17 OUT2 16 OUT3 15 OUT4 14 OUT5 13 OUT6 12 OUT7 11 GND These products designed for general and industrial use. It is not supported for special quality or reliability demanded use such as automotive or life support or something like that. REJ03D0900-0100 Rev.1.00 Jul 14, 2008 Page 1 of 5 RD74HV8T06 Logic Diagram IN OUT Function Table Input H L Output L H H : High level L : Low level Absolute Maximum Ratings Item Supply voltage range Input voltage range *1 Output voltage range *1, 2 Input clamp current Output clamp current Continuous output current Continuous current through VCC or GND Maximum power dissipation *3 at Ta = 25°C (in still air) Storage temperature Symbol VCC VI VO IIK IOK IO ICC or IGND PT Tstg Ratings 0 to 30 –0.5 to VCC + 0.5 –0.5 to 30 ±50 –75 100 ±100 835 757 –65 to 150 Unit V V V mA mA mA mA mW °C SOP TSSOP Test Conditions VI < 0 or VI > VCC VO < 0 Output : L Notes: The absolute maximum ratings are values which must not individually be exceeded, and furthermore no two of which may be realized at the same time. 1. The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed. 2. This value is limited to 30 V maximum. 3. The maximum package power dissipation was calculated using a junction temperature of 150°C. Recommended Operating Conditions Item Supply voltage range Input voltage range Output voltage range Symbol VCC VI VO Min 4.5 0 0 — — — — 0 0 0 –40 Max 30 VCC VCC 2.5 5 10 15 100 20 10 85 Unit V V V VCC = 10 V VCC = 15 V VCC = 25 V VCC = 30 V VCC < 5 V 15 V > VCC ≥ 5 V 30 V ≥ VCC ≥ 15 V Conditions Output current IOL mA Input transition rise or fall rate Operating free-air temperature Note: ∆t / ∆v Ta ns / V °C Unused or floating inputs must be held high or low. REJ03D0900-0100 Rev.1.00 Jul 14, 2008 Page 2 of 5 RD74HV8T06 Electrical Characteristics (Ta = –40 to 85°C) Item Symbol VCC (V) * 10 15 25 30 10 15 25 30 10 15 25 30 15 VCC 30 10 15 25 30 10 30 VCC Min 2.4 2.4 2.4 2.4 — — — — — — — — 46 — — — — — — — — — Typ — — — — — — — — — — — — 70 — — — — — — — — 2.5 Max — — — — 0.8 0.8 0.8 0.8 1.0 1.0 1.5 2.0 95 ±1 2.0 0.5 1.0 2.0 2.0 1 2.0 — Unit Test condition VIH Input voltage VIL V Output voltage VOL V Output current Input current Output off state leak current IOL short IIN IDS mA µA µA IOL = 2.5 mA IOL = 5 mA IOL = 10 mA IOL = 15 mA VO = VCC VIN = VCC or GND VDS = 30 V Quiescent supply current ICC µA VIN = VCC or GND Supply current Input capacitance Note: ISUPP CIN mA pF VCC = 10 V , VIN = 3.0 V VCC = 30 V , VIN = 3.0 V VIN = VCC or GND For conditions shown as Min or Max, use the appropriate values under recommended operating conditions. Switching Characteristics (CL = 50 pF, tr = tf = 5 ns) Item Symbol Vcc (V) 10 15 20 25 30 10 15 tPHL 20 25 30 10 15 20 25 30 10 15 20 25 30 Min 15 15 10 10 10 10 10 10 10 10 — — — — — 2 2 2 2 2 Ta = –40 to 85°C Typ — — — — — — — — — — — — — — — — — — — — Max 200 200 160 160 160 60 60 60 60 60 300 300 300 300 300 30 30 30 30 30 ns IN OUT Unit FROM (Input) TO (Output) tPLH ns IN OUT Propagation delay time tTLH ns IN OUT Output rise / fall time tTHL ns IN OUT REJ03D0900-0100 Rev.1.00 Jul 14, 2008 Page 3 of 5 RD74HV8T06 Test Circuit VCC VCC RL = 2 kΩ Pulse Generator Z out = 50 Ω Input Output CL = 50 pF Note: CL includes probe and jig capacitance. Waveforms tr tf 3V 90 % Input 10 % tTHL 90 % Output 50 % 10 % t PHL 50 % 90 % 50 % 10 % tTLH 90 % 50 % 10 % t PLH 0V VOH VOL Note: Input waveform : PRR = 1 MHz, duty cycle 50 %, tr ≤ 5 ns, tf ≤ 5 ns REJ03D0900-0100 Rev.1.00 Jul 14, 2008 Page 4 of 5 RD74HV8T06 Package Dimensions JEITA Package Code P-SOP20-5.5x12.6-1.27 RENESAS Code PRSP0020DD-B Previous Code FP-20DAV MASS[Typ.] 0.31g *1 D 11 F 20 NOTE) 1. DIMENSIONS"*1 (Nom)"AND"*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION"*3"DOES NOT INCLUDE TRIM OFFSET. bp HE E Index mark *2 Terminal cross section ( Ni/Pd/Au plating ) 1 Z e *3 10 bp x M L1 c Reference Dimension in Millimeters Symbol θ y A1 L Detail F D E A2 A1 A bp b1 c c1 θ HE e x y Z L L1 Min Nom Max 12.60 13.0 5.50 0.00 0.10 0.20 2.20 0.34 0.40 0.46 0.15 0.20 0.25 0° 8° 7.50 7.80 8.00 1.27 0.12 0.15 0.80 0.50 0.70 0.90 1.15 JEITA Package Code P-TSSOP20-4.4x6.5-0.65 RENESAS Code PTSP0020JB-A Previous Code TTP-20DAV MASS[Typ.] 0.07g *1 D F 11 A 20 NOTE) 1. DIMENSIONS"*1 (Nom)"AND"*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION"*3"DOES NOT INCLUDE TRIM OFFSET. bp HE *2 E Index mark Terminal cross section ( Ni/Pd/Au plating ) Reference Dimension in Millimeters Symbol c 1 Z e *3 10 bp L1 x M θ A1 L y Detail F D E A2 A1 A bp b1 c c1 θ HE e x y Z L L1 Min Nom Max 6.50 6.80 4.40 0.03 0.07 0.10 1.10 0.15 0.20 0.25 0.10 0.15 0.20 0° 8° 6.20 6.40 6.60 0.65 0.13 0.10 0.65 0.4 0.5 0.6 1.0 REJ03D0900-0100 Rev.1.00 Jul 14, 2008 Page 5 of 5 A Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Notes: 1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use. Renesas neither makes warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property rights or any other rights of Renesas or any third party with respect to the information in this document. 2. Renesas shall have no liability for damages or infringement of any intellectual property or other rights arising out of the use of any information in this document, including, but not limited to, product data, diagrams, charts, programs, algorithms, and application circuit examples. 3. You should not use the products or the technology described in this document for the purpose of military applications such as the development of weapons of mass destruction or for the purpose of any other military use. When exporting the products or technology described herein, you should follow the applicable export control laws and regulations, and procedures required by such laws and regulations. 4. All information included in this document such as product data, diagrams, charts, programs, algorithms, and application circuit examples, is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas products listed in this document, please confirm the latest product information with a Renesas sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas such as that disclosed through our website. (http://www.renesas.com ) 5. Renesas has used reasonable care in compiling the information included in this document, but Renesas assumes no liability whatsoever for any damages incurred as a result of errors or omissions in the information included in this document. 6. When using or otherwise relying on the information in this document, you should evaluate the information in light of the total system before deciding about the applicability of such information to the intended application. Renesas makes no representations, warranties or guaranties regarding the suitability of its products for any particular application and specifically disclaims any liability arising out of the application and use of the information in this document or Renesas products. 7. With the exception of products specified by Renesas as suitable for automobile applications, Renesas products are not designed, manufactured or tested for applications or otherwise in systems the failure or malfunction of which may cause a direct threat to human life or create a risk of human injury or which require especially high quality and reliability such as safety systems, or equipment or systems for transportation and traffic, healthcare, combustion control, aerospace and aeronautics, nuclear power, or undersea communication transmission. If you are considering the use of our products for such purposes, please contact a Renesas sales office beforehand. Renesas shall have no liability for damages arising out of the uses set forth above. 8. Notwithstanding the preceding paragraph, you should not use Renesas products for the purposes listed below: (1) artificial life support devices or systems (2) surgical implantations (3) healthcare intervention (e.g., excision, administration of medication, etc.) (4) any other purposes that pose a direct threat to human life Renesas shall have no liability for damages arising out of the uses set forth in the above and purchasers who elect to use Renesas products in any of the foregoing applications shall indemnify and hold harmless Renesas Technology Corp., its affiliated companies and their officers, directors, and employees against any and all damages arising out of such applications. 9. You should use the products described herein within the range specified by Renesas, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas shall have no liability for malfunctions or damages arising out of the use of Renesas products beyond such specified ranges. 10. Although Renesas endeavors to improve the quality and reliability of its products, IC products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Please be sure to implement safety measures to guard against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other applicable measures. Among others, since the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 11. In case Renesas products listed in this document are detached from the products to which the Renesas products are attached or affixed, the risk of accident such as swallowing by infants and small children is very high. You should implement safety measures so that Renesas products may not be easily detached from your products. Renesas shall have no liability for damages arising out of such detachment. 12. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written approval from Renesas. 13. Please contact a Renesas sales office if you have any questions regarding the information contained in this document, Renesas semiconductor products, or if you have any other inquiries. RENESAS SALES OFFICES Refer to "http://www.renesas.com/en/network" for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: (408) 382-7500, Fax: (408) 382-7501 Renesas Technology Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K. Tel: (1628) 585-100, Fax: (1628) 585-900 Renesas Technology (Shanghai) Co., Ltd. Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120 Tel: (21) 5877-1818, Fax: (21) 6887-7858/7898 Renesas Technology Hong Kong Ltd. 7th Floor, North Tower, World Finance Centre, Harbour City, Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: 2265-6688, Fax: 2377-3473 Renesas Technology Taiwan Co., Ltd. 10th Floor, No.99, Fushing North Road, Taipei, Taiwan Tel: (2) 2715-2888, Fax: (2) 3518-3399 Renesas Technology Singapore Pte. Ltd. 1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: 6213-0200, Fax: 6278-8001 Renesas Technology Korea Co., Ltd. Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea Tel: (2) 796-3115, Fax: (2) 796-2145 http://www.renesas.com Renesas Technology Malaysia Sdn. Bhd Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: 7955-9390, Fax: 7955-9510 © 2008. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon .7.2