0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
RJH60F7DPQ-A0

RJH60F7DPQ-A0

  • 厂商:

    RENESAS(瑞萨)

  • 封装:

  • 描述:

    RJH60F7DPQ-A0 - Silicon N Channel IGBT High Speed Power Switching - Renesas Technology Corp

  • 数据手册
  • 价格&库存
RJH60F7DPQ-A0 数据手册
Preliminary Datasheet RJH60F7DPQ-A0 Silicon N Channel IGBT High Speed Power Switching Features • Low collector to emitter saturation voltage VCE(sat) = 1.35 V typ. (at IC = 50 A, VGE = 15 V, Ta = 25°C) • Built in fast recovery diode in one package • Trench gate and thin wafer technology • High speed switching tf = 74 ns typ. (at IC = 30 A, VCE = 400 V, VGE = 15 V, Rg = 5 Ω, Ta = 25°C, inductive load) R07DS0328EJ0100 Rev.1.00 Apr 06, 2011 Outline RENESAS Package code: PRSS0003ZH-A (Package name: TO-247A) C 4 G 1. Gate 2. Collector 3. Emitter 4. Collector E 12 3 Absolute Maximum Ratings (Tc = 25°C) Item Collector to emitter voltage Gate to emitter voltage Collector current Tc = 25°C Tc = 100°C Collector peak current Collector to emitter diode forward peak current Collector dissipation Junction to case thermal impedance (IGBT) Junction to case thermal impedance (Diode) Junction temperature Storage temperature Notes: 1. Pulse width limited by safe operating area. 2. PW ≤ 5 μs, duty cycle ≤ 1% Symbol VCES VGES IC IC ic(peak) Note1 iDF(peak) Note2 PC θj-c θj-cd Tj Tstg Ratings 600 ±30 90 50 180 100 328.9 0.38 2.0 150 –55 to +150 Unit V V A A A A W °C/W °C/W °C °C R07DS0328EJ0100 Rev.1.00 Apr 06, 2011 Page 1 of 7 Preliminary Electrical Characteristics (Tj = 25°C) Item Zero gate voltage collector current Gate to emitter leak current Gate to emitter cutoff voltage Collector to emitter saturation voltage Input capacitance Output capacitance Reverse transfer capacitance Switching time Symbol ICES IGES VGE(off) VCE(sat) VCE(sat) Cies Coes Cres td(on) tr td(off) tf VECF1 VECF2 trr Min ⎯ ⎯ 4 ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ Typ ⎯ ⎯ ⎯ 1.35 1.6 4700 198 83 63 81 142 74 1.2 1.5 90 Max 100 ±1 8 1.75 ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ 2.1 ⎯ ⎯ Unit μA μA V V V pF pF pF ns ns ns ns V V ns Test Conditions VCE = 600V, VGE = 0 VGE = ±30 V, VCE = 0 VCE = 10V, IC = 1 mA IC = 50 A, VGE = 15V Note3 IC = 90 A, VGE = 15V Note3 VCE = 25 V VGE = 0 V f = 1 MHz IC = 30 A, VCE = 400 V, VGE = 15 V Rg = 5 Ω Note3 Inductive load IF = 20 A IF = 40 A Note3 Note3 C-E diode forward voltage C-E diode reverse recovery time Notes: 3. Pulse test IF = 20 A diF/dt = 100 A/μs R07DS0328EJ0100 Rev.1.00 Apr 06, 2011 Page 2 of 7 Preliminary Main Characteristics Maximum Safe Operation Area 1000 160 Typical Output Characteristics Pulse Test Ta = 25°C 10 V 120 15 V 8.8 V 80 8.6 V 8.4 V 40 8.2 V VGE = 8 V 9.4 V 9.6 V 9.8 V 9.2 V 9V Collector Current IC (A) 100 PW = 10 μs 10 1 Tc = 25°C Single pulse 10 100 1000 0.1 1 Collector Current IC (A) Collector to Emitter Voltage VCE (V) Typical Transfer Characteristics Collector to Emitter Saturation Voltage VCE(sat) (V) 10 0μ s 0 0 1 2 3 4 5 Collector to Emitter Voltage VCE (V) Collector to Emitter Saturation Voltage vs. Gate to Emitter Voltage (Typical) 7 6 5 4 3 2 1 0 6 8 10 12 14 16 18 20 IC = 20 A 50 A 90 A Pulse Test Ta = 25°C 160 Collector Current IC (A) Pulse TestV VCE = 10 Ta = 25°C Pulse Test 120 80 Tc = 75°C 40 25°C –25°C 0 0 2 4 6 8 10 Gate to Emitter Voltage VGE (V) Collector to Emitter Saturation Voltage vs. Junction Temparature (Typical) Gate to Emitter Voltage VGE (V) Gate to Emitter Cutoff Voltage vs. Junction Temparature (Typical) 8 7 IC = 10 mA 6 5 1 mA 4 3 2 −25 VCE = 10 V Pulse Test 0 25 50 75 100 125 150 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 −25 VGE = 15 V Pulse Test 0 25 50 75 100 125 150 50 A 20 A IC = 90 A Gate to Emitter Cutoff Voltage VGE(off) (V) Collector to Emitter Saturation Voltage VCE(sat) (V) Junction Temparature Tj (°C) Junction Temparature Tj (°C) R07DS0328EJ0100 Rev.1.00 Apr 06, 2011 Page 3 of 7 Preliminary Typical Capacitance vs. Collector to Emitter Voltage 10000 Cies Forward Current vs. Forward Voltage (Typical) 100 Diode Forward Current IF (A) Capacitance C (pF) 80 1000 60 40 VGE = 0 V Ta = 25°C Pulse Test 0 1 2 3 4 100 Coes VGE = 0 V f = 1 MHz Ta = 25°C 0 50 100 150 200 Cres 20 0 10 250 300 C-E Diode Forward Voltage VCEF (V) Collector to Emitter Voltage VCE (V) Dynamic Input Characteristics (Typical) Collector to Emitter Voltage VCE (V) VGE 12 VCC = 600 V 300 V 400 8 600 200 VCC = 600 V 300 V 0 0 40 80 120 160 4 0 200 Gate Charge Qg (nc) R07DS0328EJ0100 Rev.1.00 Apr 06, 2011 Gate to Emitter Voltage VGE (V) 800 IC = 50 A Ta = 25°C VCE 16 Page 4 of 7 Preliminary Switching Characteristics (Typical) (1) 1000 VCC = 400 V, VGE = 15 V Rg = 5 Ω, Tj = 150°C tr includes the diode recovery tf 100 td(off) tr td(on) Switching Characteristics (Typical) (2) 100000 Swithing Energy Losses E (μJ) Switching Times t (ns) 10000 VCC = 400 V, VGE = 15 V Rg = 5 Ω, Tj = 150°C Eon includes the diode recovery 1000 Eoff 100 Eon 10 1 10 100 200 10 1 10 100 200 Collector Current IC (A) (Inductive load) Switching Characteristics (Typical) (3) 200 Collector Current IC (A) (Inductive load) Switching Characteristics (Typical) (4) 1600 160 td(off) Swithing Energy Losses E (μJ) Switching Times t (ns) 1200 Eoff 800 Eon 400 VCC = 400 V, VGE = 15 V IC = 30 A, Rg = 5 Ω Eon includes the diode recovery 0 0 25 50 75 100 125 150 120 tr tf td(on) 40 VCC = 400 V, VGE = 15 V IC = 30 A, Rg = 5 Ω tr includes the diode recovery 0 25 50 75 100 125 150 80 0 Junction Temperature Tj (°C) (Inductive load) Junction Temperature Tj (°C) (Inductive load) R07DS0328EJ0100 Rev.1.00 Apr 06, 2011 Page 5 of 7 Preliminary Normalized Transient Thermal Impedance vs. Pulse Width (IGBT) Normalized Transient Thermal Impedance γs (t) 10 Tc = 25°C 1 D=1 0.5 0.2 0.1 θj – c(t) = γs (t) • θj – c θj – c = 0.38°C/W, Tc = 25°C PDM 0.01 0.1 0.05 0.0 2 D= PW T PW T 1 shot pulse 0.01 10 μ 100 μ 1m 10 m 100 m 1 10 Pulse Width PW (s) Normalized Transient Thermal Impedance vs. Pulse Width (Diode) Normalized Transient Thermal Impedance γs (t) 10 Tc = 25°C 1 D=1 0.5 0.2 0.1 θj – c(t) = γs (t) • θj – c θj – c = 2°C/W, Tc = 25°C PDM 0.01 0.1 0.05 0.0 2 D= PW T PW T 1 shot pulse 0.01 10 μ 100 μ 1m 10 m 100 m 1 10 Pulse Width Switching Time Test Circuit PW (s) Waveform 90% Diode clamp L VGE 10% 90% 90% IC D.U.T Rg VCE VCC 10% td(on) ton tr 10% 1% td(off) tf ttail toff 10% R07DS0328EJ0100 Rev.1.00 Apr 06, 2011 Page 6 of 7 Preliminary Package Dimensions Package Name TO-247A JEITA Package Code ⎯ RENESAS Code PRSS0003ZH-A Previous Code ⎯ MASS[Typ.] 6.14g Unit: mm 21.13 ± 0.33 6.15 15.94 ± 0.19 5.02 ± 0.19 φ3.60 ± 0.1 20.19 ± 0.38 4.5 max 0.1 2.10 + 0.2 – 13.26 1.27 ± 0.13 5.45 5.45 0.71 ± 0.1 2.41 Ordering Information Orderable Part Number RJH60F7DPQ-A0-T0 Quantity 240 pcs Shipping Container Box (Tube) R07DS0328EJ0100 Rev.1.00 Apr 06, 2011 17.63 Page 7 of 7 Notice 1. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website. 2. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. 3. 4. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 5. When exporting the products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. 6. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. 7. Renesas Electronics products are classified according to the following three quality grades: "Standard", "High Quality", and "Specific". The recommended applications for each Renesas Electronics product depends on the product's quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application categorized as "Specific" without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as "Specific" or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. The quality grade of each Renesas Electronics product is "Standard" unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc. "Standard": Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. "High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; safety equipment; and medical equipment not specifically designed for life support. "Specific": Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. 8. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. 9. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 10. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics. 12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note 1) (Note 2) "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries. "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics. SALES OFFICES Refer to "http://www.renesas.com/" for the latest and detailed information. Renesas Electronics America Inc. 2880 Scott Boulevard Santa Clara, CA 95050-2554, U.S.A. Tel: +1-408-588-6000, Fax: +1-408-588-6130 Renesas Electronics Canada Limited 1101 Nicholson Road, Newmarket, Ontario L3Y 9C3, Canada Tel: +1-905-898-5441, Fax: +1-905-898-3220 Renesas Electronics Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K Tel: +44-1628-585-100, Fax: +44-1628-585-900 Renesas Electronics Europe GmbH Arcadiastrasse 10, 40472 Düsseldorf, Germany Tel: +49-211-65030, Fax: +49-211-6503-1327 Renesas Electronics (China) Co., Ltd. 7th Floor, Quantum Plaza, No.27 ZhiChunLu Haidian District, Beijing 100083, P.R.China Tel: +86-10-8235-1155, Fax: +86-10-8235-7679 Renesas Electronics (Shanghai) Co., Ltd. Unit 204, 205, AZIA Center, No.1233 Lujiazui Ring Rd., Pudong District, Shanghai 200120, China Tel: +86-21-5877-1818, Fax: +86-21-6887-7858 / -7898 Renesas Electronics Hong Kong Limited Unit 1601-1613, 16/F., Tower 2, Grand Century Place, 193 Prince Edward Road West, Mongkok, Kowloon, Hong Kong Tel: +852-2886-9318, Fax: +852 2886-9022/9044 Renesas Electronics Taiwan Co., Ltd. 13F, No. 363, Fu Shing North Road, Taipei, Taiwan Tel: +886-2-8175-9600, Fax: +886 2-8175-9670 Renesas Electronics Singapore Pte. Ltd. 1 harbourFront Avenue, #06-10, keppel Bay Tower, Singapore 098632 Tel: +65-6213-0200, Fax: +65-6278-8001 Renesas Electronics Malaysia Sdn.Bhd. Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No. 18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: +60-3-7955-9390, Fax: +60-3-7955-9510 Renesas Electronics Korea Co., Ltd. 11F., Samik Lavied' or Bldg., 720-2 Yeoksam-Dong, Kangnam-Ku, Seoul 135-080, Korea Tel: +82-2-558-3737, Fax: +82-2-558-5141 http://www.renesas.com © 2011 Renesas Electronics Corporation. All rights reserved. Colophon 1.1
RJH60F7DPQ-A0 价格&库存

很抱歉,暂时无法提供与“RJH60F7DPQ-A0”相匹配的价格&库存,您可以联系我们找货

免费人工找货