RJK0202DSP

Preliminary Datasheet RJK0202DSP Silicon N Channel Power MOS FET Power Switching Features      High speed switching Capable of 2.5 V gate drive Low drive current High density mounting Low on-resistance RDS(on) = 5.0 m typ. (at VGS = 4.5 V) R07DS0238EJ0220 Rev.2.20 Jan 05, 2011 Outline RENESAS Package code: PRSP0008DD-D (Package name: SOP-8) 6 87 5 5678 DDDD 1, 2, 3 Source 4 Gate 5, 6, 7, 8 Drain 12 34 4 G SSS 123 Absolute Maximum Ratings (Ta = 25°C) Item Drain to source voltage Gate to source voltage Drain current Drain peak current Body-drain diode reverse drain current Avalanche current Avalanche energy Channel dissipation Channel to ambient thermal impedance Channel temperature Storage temperature Symbol VDSS VGSS ID ID(pulse) IDR IAP Note 2 EAR Note 2 Pch Note3 ch-a Note3 Tch Tstg Note1 Ratings 20 ±12 16 128 16 15 45 2.0 62.5 150 –55 to +150 Unit V V A A A A mJ W C/W C C Notes: 1. PW  10 s, duty cycle  1% 2. Value at Tch = 25C, Rg  50  3. When using the glass epoxy board (FR4 40 x 40 x 1.6 mm), PW  10s R07DS0238EJ0220 Rev.2.20 Jan 05, 2011 Page 1 of 6 RJK0202DSP Preliminary Electrical Characteristics (Ta = 25°C) Item Drain to source breakdown voltage Gate to source leak current Zero gate voltage drain current Gate to source cutoff voltage Static drain to source on state resistance Forward transfer admittance Input capacitance Output capacitance Reverse transfer capacitance Gate Resistance Total gate charge Gate to source charge Gate to drain charge Turn-on delay time Rise time Turn-off delay time Fall time Body–drain diode forward voltage Body–drain diode reverse recovery time Notes: 4. Pulse test Symbol V(BR)DSS IGSS IDSS VGS(off) RDS(on) RDS(on) |yfs| Ciss Coss Crss Rg Qg Qgs Qgd td(on) tr td(off) tf VDF trr Min 20 — — 0.4 — — — — — — — — — — — — — — — — Typ — — — — 5.0 6.2 55 3650 640 330 1.4 31 6.2 6.9 20 40 72 18 0.75 50 Max — ± 0.1 1 1.4 6.3 8.7 — — — — — — — — — — — — 0.98 — Unit V A A V m m S pF pF pF  nC nC nC ns ns ns ns V ns Test Conditions ID = 10 mA, VGS = 0 VGS = ±12 V, VDS = 0 VDS = 20 V, VGS = 0 VDS = 10 V, I D = 1 mA ID = 8 A, VGS = 4.5 V Note4 ID = 8 A, VGS = 2.5 V Note4 ID = 8 A, VDS = 10 V Note4 VDS = 10 V VGS = 0 f = 1 MHz VDD = 10 V VGS = 4.5 V ID = 16 A VGS = 4.5 V, ID = 8 A VDD  10 V RL = 1.25  Rg = 4.7  IF = 16 A, VGS = 0 Note4 IF = 16 A, VGS = 0 diF/ dt = 100 A/ s R07DS0238EJ0220 Rev.2.20 Jan 05, 2011 Page 2 of 6 RJK0202DSP Preliminary Main Characteristics Power vs. Temperature Derating 4.0 500 Test Condition : When using the glass epoxy board (FR4 40x40x1.6 mm), PW < 10 s 3.0 10 μs Maximum Safe Operation Area Channel Dissipation Pch (W) 100 Drain Current ID (A) 10 DC PW Op era tio 10 =1 1m 0μ s 0m s 2.0 n( s 1 PW 1.0 0.1 Operation in this area is limited by RDS(on) Ta = 25°C 1 shot Pulse 0.3 1 3 < 1 te 0s 5 ) No 0 50 100 150 200 0.01 0.1 10 30 100 Ambient Temperature Ta (°C) Drain to Source Voltage VDS (V) Note 5 : When using the glass epoxy board (FR4 40x40x1.6 mm) Typical Output Characteristics 20 10, 4.5 V Pulse Test Typical Transfer Characteristics 20 VDS = 10 V Pulse Test Drain Current ID (A) 12 1.4 V Drain Current ID (A) 16 1.5 V 16 12 8 Tc = 75°C 8 4 V GS = 1.3 V 4 25°C –25°C 0 2 4 6 8 10 0 1 2 3 4 5 Drain to Source Voltage VDS (V) Gate to Source Voltage VGS (V) Static Drain to Source on State Resistance vs. Drain Current Drain to Source on State Resistance RDS(on) (mΩ) 100 Drain to Source Saturation Voltage vs. Gate to Source Voltage Drain to Source Voltage VDS(on) (mV) 200 Pulse Test 160 Pulse Test 50 20 10 5 120 VGS = 2.5 V 80 ID = 10 A 40 4.5 V 2 1 1 10 100 1000 5A 2A 0 4 8 12 16 20 Gate to Source Voltage VGS (V) Drain Current ID (A) R07DS0238EJ0220 Rev.2.20 Jan 05, 2011 Page 3 of 6 RJK0202DSP Static Drain to Source on State Resistance vs. Temperature 12 10000 Preliminary Typical Capacitance vs. Drain to Source Voltage Static Drain to Source on State Resistance RDS(on) (m) Pulse Test ID = 2A, 5A,10 A Ciss Capacitance C (pF) 10 3000 1000 300 8 Coss VGS = 2.5 V 6 Crss 100 30 10 2 A, 5 A, 10 A 4 2 -25 4.5 V VGS = 0 f = 1 MHz 0 5 10 15 20 25 30 0 25 50 75 100 125 150 Case Temperature Tc (°C) Drain to Source Voltage VDS (V) Dynamic Input Characteristics Reverse Drain Current vs. Source to Drain Voltage Drain to Source Voltage VDS (V) Gate to Source Voltage VGS (V) 50 40 30 20 Reverse Drain Current IDR (A) I D = 16 A 20 16 12 8 20 16 10 V V GS = 0 V V DD = 10 V 5V VGS 12 8 V DS 10 V DD = 10 V 5V 4 0 100 4 Pulse Test 0 0.4 0.8 1.2 1.6 2.0 0 20 40 60 80 Gate Charge Qg (nc) Source to Drain Voltage VSD (V) Maximum Avalanche Energy vs. Channel Temperature Derating Repetitive Avalanche Energy EAR (mJ) 50 40 IAP = 15 A VDD = 15 V duty < 0.1 % Rg > 50  30 20 10 0 25 50 75 100 125 150 Channel Temperature Tch (°C) R07DS0238EJ0220 Rev.2.20 Jan 05, 2011 Page 4 of 6 RJK0202DSP Normalized Transient Thermal Impedance vs. Pulse Width 10 Preliminary Normalized Transient Thermal Impedance γs (t) 1 D=1 0.5 0.1 0.2 0.1 0.05 0.01 0.02 0.01 0.001 1 o sh tp uls e θch - f(t) = γs (t) x θch - f θch - f = 100°C/ W, Ta = 25°C When using the glass epoxy board (FR4 40 x 40 x 1.6 mm) PDM PW T D= PW T 0.0001 1μ 10 μ 1m 10 m 100 m 1 10 100 1000 10000 Pulse Width PW (s) Avalanche Test Circuit EAR = Avalanche Waveform 1 2 L • IAP2 • VDSS VDSS - V DD V DS Monitor L I AP Monitor V (BR)DSS I AP VDD ID V DS Rg Vin D. U. T 50 Ω 0 VDD Switching Time Test Circuit Vin Monitor Rg D.U.T. RL V DS = 10 V Vin Vout Vin Vout Monitor Switching Time Waveform 90% 10% 10% 90% td(on) tr 90% td(off) tf 10% R07DS0238EJ0220 Rev.2.20 Jan 05, 2011 Page 5 of 6 RJK0202DSP Preliminary Package Dimensions Package Name SOP-8 JEITA Package Code P-SOP8-3.95 × 4.9-1.27 RENESAS Code PRSP0008DD-D Previous Code FP-8DAV MASS[Typ.] 0.085g *1 D F 8 5 *2 E HE bp Index mark 1 Z e 4 * 3 bp xM c Terminal cross section (Ni/Pd/Au plating) NOTE) 1. DIMENSIONS "*1(Nom)" AND "*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION "*3" DOES NOT INCLUDE TRIM OFFSET. Reference Symbol Dimension in Millimeters Min L1 L D E A2 A1 A bp b1 c c1 HE e x y Z L L1 Nom Max 4.90 5.3 3.95 A 0.10 0.14 0.25 1.75 0.34 0.40 0.46 0.15 0.20 0.25 A1 y Detail F 0° 8° 5.80 6.10 6.20 1.27 0.25 0.1 0.75 0.40 0.60 1.27 1.08 Ordering Information Orderable Part Number RJK0202DSP-00-J0 Quantity 2500 pcs Taping Shipping Container R07DS0238EJ0220 Rev.2.20 Jan 05, 2011 Page 6 of 6 Notice 1. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website. 2. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. 3. 4. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 5. When exporting the products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. 6. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. 7. Renesas Electronics products are classified according to the following three quality grades: "Standard", "High Quality", and "Specific". The recommended applications for each Renesas Electronics product depends on the product's quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application categorized as "Specific" without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as "Specific" or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. The quality grade of each Renesas Electronics product is "Standard" unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc. "Standard": Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. "High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; safety equipment; and medical equipment not specifically designed for life support. "Specific": Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. 8. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. 9. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 10. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics. 12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note 1) (Note 2) "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries. "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics. SALES OFFICES Refer to "http://www.renesas.com/" for the latest and detailed information. Renesas Electronics America Inc. 2880 Scott Boulevard Santa Clara, CA 95050-2554, U.S.A. Tel: +1-408-588-6000, Fax: +1-408-588-6130 Renesas Electronics Canada Limited 1101 Nicholson Road, Newmarket, Ontario L3Y 9C3, Canada Tel: +1-905-898-5441, Fax: +1-905-898-3220 Renesas Electronics Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K Tel: +44-1628-585-100, Fax: +44-1628-585-900 Renesas Electronics Europe GmbH Arcadiastrasse 10, 40472 Düsseldorf, Germany Tel: +49-211-65030, Fax: +49-211-6503-1327 Renesas Electronics (China) Co., Ltd. 7th Floor, Quantum Plaza, No.27 ZhiChunLu Haidian District, Beijing 100083, P.R.China Tel: +86-10-8235-1155, Fax: +86-10-8235-7679 Renesas Electronics (Shanghai) Co., Ltd. Unit 204, 205, AZIA Center, No.1233 Lujiazui Ring Rd., Pudong District, Shanghai 200120, China Tel: +86-21-5877-1818, Fax: +86-21-6887-7858 / -7898 Renesas Electronics Hong Kong Limited Unit 1601-1613, 16/F., Tower 2, Grand Century Place, 193 Prince Edward Road West, Mongkok, Kowloon, Hong Kong Tel: +852-2886-9318, Fax: +852 2886-9022/9044 Renesas Electronics Taiwan Co., Ltd. 7F, No. 363 Fu Shing North Road Taipei, Taiwan Tel: +886-2-8175-9600, Fax: +886 2-8175-9670 Renesas Electronics Singapore Pte. Ltd. 1 harbourFront Avenue, #06-10, keppel Bay Tower, Singapore 098632 Tel: +65-6213-0200, Fax: +65-6278-8001 Renesas Electronics Malaysia Sdn.Bhd. Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No. 18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: +60-3-7955-9390, Fax: +60-3-7955-9510 Renesas Electronics Korea Co., Ltd. 11F., Samik Lavied' or Bldg., 720-2 Yeoksam-Dong, Kangnam-Ku, Seoul 135-080, Korea Tel: +82-2-558-3737, Fax: +82-2-558-5141 http://www.renesas.com © 2011 Renesas Electronics Corporation. All rights reserved. Colophon 1.0