RJK4007DPP-M0-T2

Preliminary Datasheet RJK4007DPP-M0 Silicon N Channel MOS FET High Speed Power Switching Features  Low on-resistance RDS(on) = 0.47  typ. (at ID = 7 A, VGS = 10 V, Ta = 25C)  Low leakage current  High speed switching R07DS0229EJ0100 Rev.1.00 Dec 15, 2010 Outline RENESAS Package code: PRSS0003AF-A (Package name: TO-220FL) D G 1. Gate 2. Drain 3. Source 1 23 S Absolute Maximum Ratings (Ta = 25°C) Item Drain to source voltage Gate to source voltage Drain current Drain peak current Body-drain diode reverse drain current Body-drain diode reverse drain peak current Avalanche current Avalanche energy Channel dissipation Channel to case thermal impedance Channel temperature Storage temperature Notes: 1. Single pulse 2. Value at Tc = 25C 3. STch = 25C, Tch  150C Symbol VDSS VGSS ID ID (pulse)Note1 IDR IDR (pulse)Note1 IAPNote3 EARNote3 Pch ch-c Tch Tstg Note2 Ratings 400 30 7.6 30 7.6 30 14 26.1 32 3.9 150 –55 to +150 Unit V V A A A A A mJ W C/W C C R07DS0229EJ0100 Rev.1.00 Dec 15, 2010 Page 1 of 6 RJK4007DPP-M0 Preliminary Electrical Characteristics (Ta = 25°C) Item Drain to source breakdown voltage Zero gate voltage drain current Gate to source leak current Gate to source cutoff voltage Static drain to source on state resistance Input capacitance Output capacitance Reverse transfer capacitance Turn-on delay time Rise time Turn-off delay time Fall time Total gate charge Gate to source charge Gate to drain charge Body-drain diode forward voltage Body-drain diode reverse recovery time Notes: 4. Pulse test Symbol V(BR)DSS IDSS IGSS VGS(off) RDS(on) Ciss Coss Crss td(on) tr td(off) tf Qg Qgs Qgd VDF trr Min 400 — — 3.0 — — — — — — — — — — — — — Typ — — — 3.5 0.47 850 140 20 25 30 90 35 24.5 5 10 0.9 230 Max — 10 0.1 4.0 0.55 — — — — — — — — — — 1.5 — Unit V A A V  pF pF pF ns ns ns ns nC nC nC V ns Test conditions ID = 1 mA, VGS = 0 VDS = 400 V, VGS = 0 VGS = 30 V, VDS = 0 VDS = 10 V, ID = 1 mA ID = 7 A, VGS = 10 V Note4 VDS = 25 V VGS = 0 f = 1 MHz ID = 7 A VGS = 10 V RL = 28.6  Rg = 25  VDD = 320 V VGS = 10 V ID = 14 A IF = 14 A, VGS = 0 Note4 IF = 14 A, VGS = 0 diF/dt = 100 A/s R07DS0229EJ0100 Rev.1.00 Dec 15, 2010 Page 2 of 6 RJK4007DPP-M0 Preliminary Main Characteristics Maximum Safe Operation Area 100 10 Typical Output Characteristics 6V 5.4 V 10 Drain Current ID (A) 00 μs Drain Current ID (A) 10 PW μs 7V Pulse Test Ta = 25°C 5.2 V =1 8 10 V 6 1 0.1 Operation in this area is limited by RDS(on) 5V 4.9 V 4.8 V 4 0.01 Tc = 25°C 1 shot 10 100 1000 2 4.7 V VGS = 4.5 V 0.001 1 0 4 8 12 16 20 Drain to Source Voltage VDS (V) Drain to Source Voltage VDS (V) Static Drain to Source on State Resistance vs. Drain Current (Typical) Drain to Source on State Resistance RDS(on) (Ω) 10 Pulse Test VGS = 10 V Ta = 25°C Typical Transfer Characteristics 20 VDS = 10 V Pulse Test −25°C 25°C Drain Current ID (A) 16 12 8 Tc = 75°C 1 4 0 2 4 6 8 10 0.1 0.1 1 10 100 Gate to Source Voltage VGS (V) Static Drain to Source on State Resistance vs. Temperature (Typical) Pulse Test VGS = 10 V 1.6 ID = 14 A Drain Current ID (A) Static Drain to Source on State Resistance RDS(on) (Ω) Body-Drain Diode Reverse Recovery Time (Typical) 1000 1.2 Reverse Recovery Time trr (ns) 2.0 100 0.8 3A 7A 0.4 di / dt = 100 A / μs VGS = 0, Ta = 25°C 10 1 10 100 0 -25 0 25 50 75 100 125 150 Case Temperature Tc (°C) Reverse Drain Current IDR (A) R07DS0229EJ0100 Rev.1.00 Dec 15, 2010 Page 3 of 6 RJK4007DPP-M0 Typical Capacitance vs. Drain to Source Voltage (Typical) Drain to Source Voltage VDS (V) 10000 Preliminary Dynamic Input Characteristics (Typical) ID = 14 A Ta = 25 °C VGS 12 VDS VDD = 320 V 200 V 100 V 8 1000 Ciss 300 100 Coss 10 VGS = 0 f = 1 MHz Ta = 25°C 100 200 300 Crss 200 100 VDD = 320 V 200 V 100 V 8 16 24 32 4 1 0 0 40 0 Drain to Source Voltage VDS (V) Gate Charge Qg (nC) Gate to Source Cutoff Voltage VGS(off) (V) Reverse Drain Current vs. Source to Drain Voltage (Typical) 20 Gate to Source Cutoff Voltage vs. Case Temperature (Typical) 5 VDS = 10 V Reverse Drain Current IDR (A) 16 VGS = 0 Pulse Test Ta = 25 °C 4 12 3 ID = 10 mA 1 mA 2 1 0.1 mA 8 4 0 0.4 0.8 1.2 1.6 2.0 0 -25 0 25 50 75 100 125 150 Source to Drain Voltage VSD (V) Case Temperature Tc (°C) R07DS0229EJ0100 Rev.1.00 Dec 15, 2010 Page 4 of 6 Gate to Source Voltage VGS (V) 400 16 Capacitance C (pF) RJK4007DPP-M0 Normalized Transient Thermal Impedance vs. Pulse Width Normalized Transient Thermal Impedance γs (t) 10 Tc = 25°C Preliminary 1 D=1 0.5 0.2 0.1 0.1 0.05 0.02 0.01 θch – c (t) = γ s (t) • θch – c θch – c = 3.9°C/W, Tc = 25°C 0.01 o 1sh tp uls e PDM PW T D= PW T 0.001 10 μ 100 μ 1m 10 m 100 m 1 10 100 Pulse Width PW (s) Switching Time Test Circuit Vin Monitor D.U.T. RL 25 Ω Vin 10 V VDD =200 V Vin Vout 10% 10% Vout Monitor Waveform 90% 10% 90% td(on) tr 90% td(off) tf R07DS0229EJ0100 Rev.1.00 Dec 15, 2010 Page 5 of 6 RJK4007DPP-M0 Preliminary Package Dimensions Package Name TO-220FL JEITA Package Code ⎯ RENESAS Code PRSS0003AF-A Previous Code TO-220FL MASS[Typ.] 1.5g Unit: mm 10.0 ± 0.3 2.8 ± 0.2 3.0 ± 0.3 15.0 ± 0.3 φ 3.2 ± 0.2 3.6 ± 0.3 12.5 ± 0.5 1.15 ± 0.2 1.15 ± 0.2 0.75 ± 0.15 0.40 ± 0.15 2.54 ± 0.25 2.54 ± 0.25 6.5 ± 0.3 2.6 ± 0.2 4.5 ± 0.2 Ordering Information Orderable Part Number RJK4007DPP-M0-T2 Quantity 1050 pcs Shipping Container Box (Tube) R07DS0229EJ0100 Rev.1.00 Dec 15, 2010 Page 6 of 6 Notice 1. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website. 2. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. 3. 4. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 5. When exporting the products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. 6. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. 7. Renesas Electronics products are classified according to the following three quality grades: "Standard", "High Quality", and "Specific". The recommended applications for each Renesas Electronics product depends on the product's quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application categorized as "Specific" without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as "Specific" or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. The quality grade of each Renesas Electronics product is "Standard" unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc. "Standard": Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. "High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; safety equipment; and medical equipment not specifically designed for life support. "Specific": Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. 8. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. 9. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 10. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics. 12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note 1) (Note 2) "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries. "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics. SALES OFFICES Refer to "http://www.renesas.com/" for the latest and detailed information. Renesas Electronics America Inc. 2880 Scott Boulevard Santa Clara, CA 95050-2554, U.S.A. Tel: +1-408-588-6000, Fax: +1-408-588-6130 Renesas Electronics Canada Limited 1101 Nicholson Road, Newmarket, Ontario L3Y 9C3, Canada Tel: +1-905-898-5441, Fax: +1-905-898-3220 Renesas Electronics Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K Tel: +44-1628-585-100, Fax: +44-1628-585-900 Renesas Electronics Europe GmbH Arcadiastrasse 10, 40472 Düsseldorf, Germany Tel: +49-211-65030, Fax: +49-211-6503-1327 Renesas Electronics (China) Co., Ltd. 7th Floor, Quantum Plaza, No.27 ZhiChunLu Haidian District, Beijing 100083, P.R.China Tel: +86-10-8235-1155, Fax: +86-10-8235-7679 Renesas Electronics (Shanghai) Co., Ltd. Unit 204, 205, AZIA Center, No.1233 Lujiazui Ring Rd., Pudong District, Shanghai 200120, China Tel: +86-21-5877-1818, Fax: +86-21-6887-7858 / -7898 Renesas Electronics Hong Kong Limited Unit 1601-1613, 16/F., Tower 2, Grand Century Place, 193 Prince Edward Road West, Mongkok, Kowloon, Hong Kong Tel: +852-2886-9318, Fax: +852 2886-9022/9044 Renesas Electronics Taiwan Co., Ltd. 7F, No. 363 Fu Shing North Road Taipei, Taiwan Tel: +886-2-8175-9600, Fax: +886 2-8175-9670 Renesas Electronics Singapore Pte. Ltd. 1 harbourFront Avenue, #06-10, keppel Bay Tower, Singapore 098632 Tel: +65-6213-0200, Fax: +65-6278-8001 Renesas Electronics Malaysia Sdn.Bhd. Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No. 18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: +60-3-7955-9390, Fax: +60-3-7955-9510 Renesas Electronics Korea Co., Ltd. 11F., Samik Lavied' or Bldg., 720-2 Yeoksam-Dong, Kangnam-Ku, Seoul 135-080, Korea Tel: +82-2-558-3737, Fax: +82-2-558-5141 http://www.renesas.com © 2010 Renesas Electronics Corporation. All rights reserved. Colophon 1.0