RV1S2281ACCSP-10YV#KC0

Data Sheet RV1S2281A R08DS0185EJ0100 Rev.1.00 Nov 11,2019 OPERATING AMBIENT TEMPERATURE 115°C, 4-PIN SSOP WITH 8.2mm CREEPAGE DISTANCE (LSSOP) PHOTOCOUPLER DESCRIPTION The RV1S2281A is an optically coupled isolator containing a GaAs light emitting diode and an NPN silicon phototransistor. This package is very small and thin with long creepage distance(8.2mm). This small product is suitable for various interface circuits which require surface mounting and high-density mounting. FEATURES       Small and long creepage (8.2 mm, LSSOP) Operating ambient temperature: 115°C High isolation voltage (BV = 5000 Vr.m.s.） Embossed tape product ：RV1S2281ACCSP-10Yx#KC0 : 3500 pcs/reel Pb-Free product Safety standard • UL ：UL1577, Double protection • CSA ：CAN/CSA-C22.2 No.62368-1, Reinforced insulation • VDE ：DIN EN 60747-5-5 (Option) PIN CONNECTION (Top View) 4 3 1. Anode 2. Cathode 3. Emitter 4. Collector 1 2 APPLICATIONS       Robot controller Industrial inverter AC Servo Programmable logic controller Measurement equipment Power supply Start of mass production Nov.2019 R08DS0185EJ0100 Nov 11,2019 Rev.1.00 Page 1 of 14 RV1S2281A 章題 PACKAGE DIMENSIONS (UNIT：mm) Weight : 0.075g（Typ.） PHOTOCOUPLER CONSTRUCTIONS Parameter UNIT (MIN.) Air Distance Creepage Distance 8.2 mm 8.2 mm Isolation Distance 0.15 mm R08DS0185EJ0100 Nov 11,2019 Rev.1.00 Page 2 of 14 RV1S2281A 章題 MARKING EXAMPLE R An initial of “Renesas” 2281 Product Part Number＊ ○ No.1 pin Mark N744 N Rank Code 744 Assembly Lot 7 Last one-digit of Assembly Year 44 Weekly Serial Code ＊）Applicable type numbers listed below RV1S 2281 ACCSP-10Yx Marking type number. ”RV1S”and “ACCSP-10Yx””are omitted from original type number ORDERING INFORMATION Part Number Order Number RV1S2281ACCSP -10YC RV1S2281ACCSP -10YC#SC0 RV1S2281ACCSP -10YV RV1S2281ACCSP -10YC#KC0 RV1S2281ACCSP -10YV#SC0 RV1S2281ACCSP -10YV#KC0 Solder Plating Specification*1 Pb-Free and Halogen Free (Ni/Pd/Au) Packing Style 20 pcs(Tape 20 pcs cut) Embossed Tape 3500 pcs/reel 20 pcs(Tape 20 pcs cut) Embossed Tape 3500 pcs/reel Safety Standard Approval Application Part Number*2 Standard products (UL, CSA approved) RV1S2281A UL, CSA, DIN EN 60747-5-5 approved Notes:*1. When specifying CTR rank, please add “/CTR rank” after Order Number. ex. L rank : RV1S2281ACCSP-10YC#SC0/L Notes:*2. For the application of the Safety Standard, following part number should be used. R08DS0185EJ0100 Nov 11,2019 Rev.1.00 Page 3 of 14 RV1S2281A 章題 ABSOLUTE MAXIMUM RATINGS (TA=25°C, unless otherwise specified) Parameter Symbol Ratings Unit Forward Current (DC) IF 30 mA Reverse Voltage VR 6 V ⊿PD/°C 0.6 mW/°C PD 60 mW IFP 0.5 A Collector to Emitter Voltage VCEO 80 V Emitter to Collector Voltage VECO 5 V IC 30 mA ⊿PC/°C 1.2 mW/°C PC 120 mW Isolation Voltage*3 BV 5000 Vr.m.s. Operating Ambient Temperature TA -40 ~ +115 C Storage Temperature Tstg -40 ~ +125 C Diode Power Dissipation Derating*1 Power Dissipation Peak Forward Current Transistor *2 Collector Current Power Dissipation Derating*1 Power Dissipation *1 Derating from TA = 25C *2 PW = 100 s, Duty Cycle = 1% *3 AC voltage for 1 minute at TA = 25C, RH = 60% between input and output. Pins 1-2 shorted together, 3-4 shorted together. ELECTRICAL CHARACTERISTICS (TA = 25°C ) Parameter Diode Symbol Conditions Forward Voltage VF IF = 5 mA Reverse Current Terminal Capacitance IR Ct VR = 5 V V = 0 V, f = 1 MHz MIN. TYP. MAX. 1.15 1.4 V 5 A 10 Transistor Collector to Emitter Dark Current ICEO IF=0mA, VCE=80V Coupled Current Transfer Ratio (IC/IF) *1 CTR IF = 5 mA, VCE = 5 V 50 200 IF = 1 mA, VCE = 5 V IF = 10 mA, IC = 2 mA 10 50 VCE (sat) Collector Saturation Voltage Isolation Resistance Isolation Capacitance Rise Time*2 Fall Time*2 RI-O VI-O = 1kVDC CI-O tr V = 0 V, f = 1 MHz VCC = 5 V, IC = 2 mA tf RL = 100  Unit pF 100 nA 400 % 0.3 V  1011 0.4 4 pF s 5 *1. CTR rank CTR rank N M L W R08DS0185EJ0100 Nov 11,2019 CTR(%) 50 ~ 400 10 ~ 50～150 10 ~ 100～300 20 ~ 130～260 20 ~ Rev.1.00 Condition IF = 5 mA, VCE = 5 V IF = 1 mA, VCE = 5 V IF = 5 mA, VCE = 5 V IF = 1 mA, VCE = 5 V IF = 5 mA, VCE = 5 V IF = 1 mA, VCE = 5 V IF = 5 mA, VCE = 5 V IF = 1 mA, VCE = 5 V Page 4 of 14 RV1S2281A 章題 *2. Test circuit for switching time Pulse Input VCC Input In monitor ton td PW = 100  s Duty cycle = 1/10 90% IF VOUT 50  Output RL = 100  10% tr R08DS0185EJ0100 Nov 11,2019 toff ts Rev.1.00 tf Page 5 of 14 RV1S2281A 章題 TYPICAL CHARACTERISTICS (TA = +25°C, unless otherwise specified) Remark The graphs indicate nominal characteristics. R08DS0185EJ0100 Nov 11,2019 Rev.1.00 Page 6 of 14 RV1S2281A 章題 TYPICAL CHARACTERISTICS (TA = +25°C, unless otherwise specified) Remark The graphs indicate nominal characteristics. R08DS0185EJ0100 Nov 11,2019 Rev.1.00 Page 7 of 14 RV1S2281A 章題 TAPING SPECIFICATIONS (UNIT: mm) テープ方向 テープ方向 Tape Direction Outline and Dimensions (Tape) Outline and Dimensions (Reel) 2.0±0.5 21.0±0.8 100±1.0 R1.0 330±2.0 2.0±0.5 13.0±0.2 17.5±1.0 21.5±1.0 Packing: 3 500 pcs/reel R08DS0185EJ0100 Nov 11,2019 Rev.1.00 Page 8 of 14 RV1S2281A 章題 RECOMMENDED MOUNT PAD DIMENSIONS (UNIT：mm) Remark All dimensions in this figure must be evaluated before use. R08DS0185EJ0100 Nov 11,2019 Rev.1.00 Page 9 of 14 RV1S2281A NOTES ON 章題 HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering • Peak reflow temperature 260C or below (package surface temperature) • Time of peak reflow temperature 10 seconds or less • Time of temperature higher than 220C 60 seconds or less • Time to preheat temperature from 120 to 180C 12030 s • Number of reflows Three • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Package Surface Temperature T (°C) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s 260°C MAX. 220°C to 60 s 180°C 120°C 120±30 s (preheating) Time (s) (2) Wave soldering • Temperature • Time • Preheating conditions • Number of times • Flux 260C or below (molten solder temperature) 10 seconds or less 120C or below (package surface temperature) One (Allowed to be dipped in solder including plastic mold portion.) Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Soldering by Soldering Iron • Peak Temperature (lead part temperature) 350C or below • Time (each pins) 3 seconds or less • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead (b) Please be sure that the temperature of the package would not be heated over 100C (4) Cautions • Flux Cleaning Avoid cleaning with Freon based or halogen-based (chlorinated etc.) solvents. • Do not use fixing agents or coatings containing halogen-based substances. 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between collectoremitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings. R08DS0185EJ0100 Nov 11,2019 Rev.1.00 Page 10 of 14 RV1S2281A 章題 3. Measurement conditions of current transfer ratios (CTR), which differ according to photocoupler Check the setting values before use, since the forward current conditions at CTR measurement differ according to product. When using products other than at the specified forward current, the characteristics curves may differ from the standard curves due to CTR value variations or the like. Therefore, check the characteristics under the actual operating conditions and thoroughly take variations or the like into consideration before use. USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. R08DS0185EJ0100 Nov 11,2019 Rev.1.00 Page 11 of 14 RV1S2281A 章題 SPECIFICATION OF VDE MARKS LICENSE DOCUMENT Parameter Symbol Climatic test class (IEC 60068-1/DIN EN 60068-1) Dielectric strength maximum operating isolation voltage Test voltage (partial discharge test, procedure a for type test and random test) Upr = 1.6  UIORM, Pd  5 pC Test voltage (partial discharge test, procedure b for all devices) Upr = 1.875  UIORM, Pd  5 pC Highest permissible overvoltage Unit 40/115/21 UIORM Upr 1 100 1 760 Vpeak Vpeak Upr 2 063 Vpeak UIOTM 8 000 Vpeak 2 Degree of pollution (IEC 60664-1/DIN EN 60664-1 (VDE 0110-1)) Comparative tracking index (IEC 60112/DIN EN 60112 (VDE 0303-11)) Rating CTI 400 Ⅱ Material group (IEC 60664-1/DIN EN 60664-1 (VDE 0110-1)) Storage temperature range Tstg －40～＋125 C Operating temperature range TA －40～＋115 C Ris MIN. 1012  Ris MIN. 1011  Tsi Isi Psi Ris MIN. 175 400 700 109 °C mA mW  Isolation resistance, minimum value VIO = 500 V dc at TA = 25°C VIO = 500 V dc at TA MAX. at least 100°C Safety maximum ratings (maximum permissible in case of fault, see thermal derating curve) Package temperature Current (input current IF, Psi = 0) Power (output or total power dissipation) Isolation resistance VIO = 500 V dc at TA = Tsi Method a) Destructive Test, Type and Sample Test R08DS0185EJ0100 Nov 11,2019 Rev.1.00 Page 12 of 14 RV1S2281A Method b) 章題 Non-destructive Test, 100% Production Test Upr=2063V V UIORM=1100V ttest t3 tp t t4 t3,t4=0.1 sec tp(PARTIAL DISCHARGE)=1.0 sec ttest=1.2 sec R08DS0185EJ0100 Nov 11,2019 Rev.1.00 Page 13 of 14 RV1S2281A Caution 章題 GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. • Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. • Do not burn, destroy, cut, crush, or chemically dissolve the product. • Do not lick the product or in any way allow it to enter the mouth. All trademarks and registered trademarks are the property of their respective owners. R08DS0185EJ0100 Nov 11,2019 Rev.1.00 Page 14 of 14 Notice 1. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation or any other use of the circuits, software, and information in the design of your product or system. Renesas Electronics disclaims any and all liability for any losses and damages incurred by you or third parties arising from the use of these circuits, software, or information. 2. Renesas Electronics hereby expressly disclaims any warranties against and liability for infringement or any other claims involving patents, copyrights, or other intellectual property rights of third parties, by or arising from the use of Renesas Electronics products or technical information described in this document, including but not limited to, the product data, drawings, charts, programs, algorithms, and application examples. 3. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. 4. You shall not alter, modify, copy, or reverse engineer any Renesas Electronics product, whether in whole or in part. Renesas Electronics disclaims any and all liability for any losses or damages incurred by 5. Renesas Electronics products are classified according to the following two quality grades: “Standard” and “High Quality”. The intended applications for each Renesas Electronics product depends on the you or third parties arising from such alteration, modification, copying or reverse engineering. product’s quality grade, as indicated below. "Standard": Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; industrial robots; etc. "High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control (traffic lights); large-scale communication equipment; key financial terminal systems; safety control equipment; etc. Unless expressly designated as a high reliability product or a product for harsh environments in a Renesas Electronics data sheet or other Renesas Electronics document, Renesas Electronics products are not intended or authorized for use in products or systems that may pose a direct threat to human life or bodily injury (artificial life support devices or systems; surgical implantations; etc.), or may cause serious property damage (space system; undersea repeaters; nuclear power control systems; aircraft control systems; key plant systems; military equipment; etc.). Renesas Electronics disclaims any and all liability for any damages or losses incurred by you or any third parties arising from the use of any Renesas Electronics product that is inconsistent with any Renesas Electronics data sheet, user’s manual or other Renesas Electronics document. 6. When using Renesas Electronics products, refer to the latest product information (data sheets, user’s manuals, application notes, “General Notes for Handling and Using Semiconductor Devices” in the reliability handbook, etc.), and ensure that usage conditions are within the ranges specified by Renesas Electronics with respect to maximum ratings, operating power supply voltage range, heat dissipation characteristics, installation, etc. Renesas Electronics disclaims any and all liability for any malfunctions, failure or accident arising out of the use of Renesas Electronics products outside of such specified ranges. 7. Although Renesas Electronics endeavors to improve the quality and reliability of Renesas Electronics products, semiconductor products have specific characteristics, such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Unless designated as a high reliability product or a product for harsh environments in a Renesas Electronics data sheet or other Renesas Electronics document, Renesas Electronics products are not subject to radiation resistance design. You are responsible for implementing safety measures to guard against the possibility of bodily injury, injury or damage caused by fire, and/or danger to the public in the event of a failure or malfunction of Renesas Electronics products, such as safety design for hardware and software, including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult and impractical, you are responsible for evaluating the safety of the final products or systems manufactured by you. 8. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. You are responsible for carefully and sufficiently investigating applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive, and using Renesas Electronics products in compliance with all these applicable laws and regulations. Renesas Electronics disclaims any and all liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 9. Renesas Electronics products and technologies shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. You shall comply with any applicable export control laws and regulations promulgated and administered by the governments of any countries asserting jurisdiction over the parties or transactions. 10. It is the responsibility of the buyer or distributor of Renesas Electronics products, or any other party who distributes, disposes of, or otherwise sells or transfers the product to a third party, to notify such third party in advance of the contents and conditions set forth in this document. 11. This document shall not be reprinted, reproduced or duplicated in any form, in whole or in part, without prior written consent of Renesas Electronics. 12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products. (Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its directly or indirectly controlled subsidiaries. (Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics. (Rev.4.0-1 November 2017) http://www.renesas.com SALES OFFICES Refer to "http://www.renesas.com/" for the latest and detailed information. Renesas Electronics Corporation TOYOSU FORESIA, 3-2-24 Toyosu, Koto-ku, Tokyo 135-0061, Japan Renesas Electronics America Inc. 1001 Murphy Ranch Road, Milpitas, CA 95035, U.S.A. Tel: +1-408-432-8888, Fax: +1-408-434-5351 Renesas Electronics Canada Limited 9251 Yonge Street, Suite 8309 Richmond Hill, Ontario Canada L4C 9T3 Tel: +1-905-237-2004 Renesas Electronics Europe GmbH Arcadiastrasse 10, 40472 Düsseldorf, Germany Tel: +49-211-6503-0, Fax: +49-211-6503-1327 Renesas Electronics (China) Co., Ltd. Room 101-T01, Floor 1, Building 7, Yard No. 7, 8th Street, Shangdi, Haidian District, Beijing 100085, China Tel: +86-10-8235-1155, Fax: +86-10-8235-7679 Renesas Electronics (Shanghai) Co., Ltd. Unit 301, Tower A, Central Towers, 555 Langao Road, Putuo District, Shanghai 200333, China Tel: +86-21-2226-0888, Fax: +86-21-2226-0999 Renesas Electronics Hong Kong Limited Unit 1601-1611, 16/F., Tower 2, Grand Century Place, 193 Prince Edward Road West, Mongkok, Kowloon, Hong Kong Tel: +852-2265-6688, Fax: +852 2886-9022 Renesas Electronics Taiwan Co., Ltd. 13F, No. 363, Fu Shing North Road, Taipei 10543, Taiwan Tel: +886-2-8175-9600, Fax: +886 2-8175-9670 Renesas Electronics Singapore Pte. Ltd. 80 Bendemeer Road, Unit #06-02 Hyflux Innovation Centre, Singapore 339949 Tel: +65-6213-0200, Fax: +65-6213-0300 Renesas Electronics Malaysia Sdn.Bhd. Unit No 3A-1 Level 3A Tower 8 UOA Business Park, No 1 Jalan Pengaturcara U1/51A, Seksyen U1, 40150 Shah Alam, Selangor, Malaysia Tel: +60-3-5022-1288, Fax: +60-3-5022-1290 Renesas Electronics India Pvt. Ltd. No.777C, 100 Feet Road, HAL 2nd Stage, Indiranagar, Bangalore 560 038, India Tel: +91-80-67208700 Renesas Electronics Korea Co., Ltd. 17F, KAMCO Yangjae Tower, 262, Gangnam-daero, Gangnam-gu, Seoul, 06265 Korea Tel: +82-2-558-3737, Fax: +82-2-558-5338 © 2019 Renesas Electronics Corporation. All rights reserved. Colophon 8.0