Tsi574
Serial RapidIO Switch
Configurable
• Up to four 4x links
• Up to eight 1x links
• Each 4x link can be separated into two, 1x
links
• Supports 1.25, 2.5 and 3.125 Gbaud
rates
• Hot Swap
– Live insertion and extraction of field
replaceable units
• I2C Master/Slave
• Multicast event control symbol
• Lane swap
The Tsi574 enhances system scalability
through device configuration and provides
architects and designers with a solution for
both throughput intensive and power
sensitive applications.
Performance
• Low latency through packet cut-through
• Full duplex, line rate termination,
non-blocking fabric
• Prevention of head-of-line blocking
• Error management extensions
• Multicast
• Performance monitoring and statistic
registers
• Programmable buffer management
• Additional scheduling algorithms
Low Power
• Programmable SerDes
• Configurable on port width and speed
• Configurable port power down
• Further power savings from Tsi564A
The Tsi574 provides designers and architects with maximum scalability to
design the device into a wide range of applications. Flexible port
configurations can be selected through multiple port width and frequency
options.
Building on the industry leading Tsi564ATM 4/8 Port Serial RapidIO Switch,
the Tsi574 contains all the benefits of its predecessor plus enhances the
fabric switching capabilities through the addition of multicast, traffic
management through scheduling algorithms, programmable buffer depth,
and fabric performance monitoring to supervise and manage traffic flow.
Block Diagram
Multicast
Engine
SP0
(4x or 1x)
SP2
(4x or 1x)
SP1
(1x only)
SP3
(1x only)
SP4
(4x or 1x)
Enhanced Internal
Switching Fabric
SP5
(1x only)
Up to 2 Serial RapidIO Ports - 1x/4x Mode
or
Up to 4 Serial RapidIO Ports - 1x Mode
Serial RapdIO Interfaces
• 40 Gbits/s Full-Duplex Serial RapidIO
Switch
• Open Standard Compliant
– RapidIO Interconnect Specification
(Revision 1.3)
– IEEE 1149.6 AC-JTAG
The Tsi574TM is a third generation RapidIO switch supporting 40 Gbits/s
aggregate bandwidth. The Tsi574 is part of a family of switches that enable
customers to develop systems with robust features and high performance at
low cost.
Up to 2 Serial RapidIO Ports - 1x/4x Mode
or
Up to 4 Serial RapidIO Ports - 1x Mode
Features
SP6
(4x or 1x)
SP7
(1x only)
Registers
I2C
JTAG
Master and
Slave Devices
IEEE1149.6 Boundary Scan
80B803B_BK001_02
Embedded applications further benefit from the ability to route packets to
multiple endpoints through hierarchical lookup tables, independent unicast
and multicast routing mechanisms, and error management extensions that
provide proactive issue notification to the fabric controller. In addition, the
Tsi574 supports both in-band serial RapidIO access and out-of-band access
to the full fabric register set through the I2C interface.
Cost
• Integrated SerDes
– Small, 399 HSBGA, 21mm package
1 of 2
July 23, 2009
2009 Integrated Device Technology, Inc. All rights reserved. NOT AN OFFER FOR SALE. This Document Type is for informational and planning purposes only and subject to a Non-Disclosure Agreement (NDA). Nothing contained in this presentation,
whether verbal or written, is intended as, or shall have the effect of, a sale or an offer for sale that creates a contractual power of acceptance.
Feature Sheet
Typical Applications
Benefits
• Scalability: Single solution for mesh,
fabric, and aggregated systems
• Performance: Improved system and
distributed processing performance
• Power: SerDes implementation for low
power solution
The Tsi574 can be used in many embedded communication applications. It
provides chip-to-chip interconnect between I/O devices and can replace
existing proprietary backplane fabrics for board-to-board interconnect which
improves system cost and product time-to-market.
Processor Farm Mezzanine Diagram
Specifications
•
•
•
•
Technology: 0.13um
Voltage: 1.2V and 3.3V
Low power consumption
Package: 399 ball, 21mm x 21mm,
1mm ball pitch FCBGA
• Rated for commercial and industrial
temperatures
• Forward compatible with the Tsi564A
Serial RapidIO Switch allowing easy
migration for existing systems.
DSP
Dual
Serial
RapidIO
Tsi574
DSP
80B803B_TA001_01
Target Markets
• Node B, Radio Network Controller,
Media Gateway
The Tsi574 provides traffic aggregation through packet prioritization when it
is used with RapidIO-enabled I/O devices. When it is in a system with multiple
RapidIO-enabled processors it provides high performance peer-to-peer
communication through its non-blocking switch fabric.
Communications Wireline Infrastructure
Switch Carrier Blade Diagram
Wireless Infrastructure
• Multiservice WAN Switches, 1 to 10
Gbit Ethernet Switches, 1 to >10Gbit
Routers, DSLAMs
Storage
• Storage Area Networks, Network
Attached Storage, High-Performance
Work Stations, Multi-service Access
Nodes, Carrier-grade VoIP
AMC Slot
AMC Slot
AMC Slot
AMC Slot
Video Infrastructure
• Broadcast, imaging, and encoding
• Architecture Standards
• ATCA, MicroTCA, VXS, VPX
Tsi574
Tsi574
80B803B_TA002_01
Serial RapidIO Mesh
DISCLAIMER Integrated Device Technology, Inc. (IDT) and its subsidiaries reserve the right to modify the products and/or specifications described herein at any time and at IDT’s sole discretion. All information in this document, including descriptions
of product features and performance, is subject to change without notice. Performance specifications and the operating parameters of the described products are determined in the independent state and are not guaranteed to perform the same way
when installed in customer products. The information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the suitability of IDT’s products for any particular purpose, an
implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not convey any license under intellectual property rights of IDT or any third parties.
IDT’s products are not intended for use in life support systems or similar devices where the failure or malfunction of an IDT product can be reasonably expected to significantly affect the health or safety of users. Anyone using and IDT product in such
a manner does so at their own risk, absent an express, written agreement by IDT.
Integrated Device Technology, IDT and the IDT logo are registered trademarks of IDT. Other trademarks and service marks used herein, including protected names, logos and designs, are the property of IDT or their respective third party owners.
CORPORATE HEADQUARTERS
6024 Silver Creek Valley Road
San Jose, CA 95138
2 of 2
for SALES:
800-345-7015 or 408-284-8200
fax: 408-284-2775
www.idt.com
for Tech Support:
408-360-1533
sRIO@idt.com
Document: 80B803B_FB001_04
July 23, 2009