FLT260F

STRAP TYPE PPTC FLT Series FEATURES •Low profile, Solid state •Application: Rechargeable battery packs, Lithium cell and battery packs •Operation Current: 0.7A ~3.4A •Maximum Voltage: 24V •Temperature Range: -40°C to 85°C RoHS ü AGENCY RECOGNITION •UL (E211981) •C-UL (E211981) •TÜV (R3-50004084) ELECTRICAL CHARACTERISTIC (23°C) Part Number FLT070F FLT100F FLT180F FLT190F FLT260F FLT300F FLT310F FLT340F Hold Current IH, A 0.7 1.00 1.8 1.9 2.6 3.0 3.1 3.4 Trip Current IT, A 1.5 2.5 3.8 4.2 5.2 6.3 6.0 6.8 Maximum time to trip at 5xIH, sec 5.0 7.0 2.9 3.0 5.0 4.0 4.0 5.0 Maximum Current IMAX, A 100 100 100 100 100 100 100 100 Rated Voltage VMAX, Vdc 24 24 24 24 24 24 24 24 Typical Power Pd, W 1.1 1.5 2.0 1.9 2.3 2.0 2.5 2.7 RMIN Resistance Tolerance RMAX R1MAX OHMS 0.200 0.130 0.068 0.057 0.042 0.031 0.030 0.027 OHMS 0.340 0.260 0.120 0.100 0.076 0.055 0.055 0.050 OHMS 0.100 0.070 0.040 0.030 0.025 0.015 0.018 0.016 IH=Hold current-maximum current at which the device will not trip at 23°C still air. IT=Trip current-maximum current at which the device will always trip at 23°C still air. V MAX=Maximum voltage device can withstand without damage at its rated current. I MAX=Maximum fault current device can withstand without damage at rated voltage (V MAX). Pd=Typical power dissipated from device when in the tripped state in 23°C still air environment. R MIN=Minimum device resistance at 23°C. R1MAX=Maximum device resistance at 23°C, 1 hour after tripping. Physical specifications: Lead materials: 0.13mm nominal thickness, quarter-hard nickel. Insulating material: Polyester tape. FLT PRODUCT DIMENSIONS (MILLIMETERS) Part Number FLT070F FLT100F FLT180F FLT190F FLT260F FLT300F FLT310F FLT340F Fig 1 1 1 1 1 1 1 A Min Max Min 4.9 4.9 4.9 19.9 22.1 20.9 23.1 24.0 26.0 B 5.2 5.2 5.2 0.7 0.6 0.6 C 1.2 1.0 1.0 1.1 1.0 1.1 1.0 5.5 4.1 4.1 5.0 5.0 6.3 5.0 D 7.5 5.5 5.5 7.6 7.0 8.9 7.0 3.9 3.9 3.9 4.8 5.9 6 5.9 F 4.1 4.1 4.1 5.4 6.1 6.6 6.1 Max Min Max Min Max Min Max 21.3 23.4 10.2 11.0 0.5 24.0 26.0 10.8 11.9 0.6 28.4 31.8 13.0 13.5 0.5 24.0 26.0 14.8 15.9 0.6 1 24.0 26.0 14.8 15.9 0.6 1.0 4.0 5.0 5.9 6.1 THERMAL DERATING CURVE T herm Der al ating C urve - FLT Seri s e Percent o f Ra ted Ho ld a nd Trip Current 200% TYPICAL TIME-TO-TRIP AT 23°C A 10 B C D E FG H 150% 100% 1 50% 0% -40 -20 0 20 40 60 80 0.1 1 10 Fault Current (A) 100 A B C D E F G H = = = = = = = = FLT070 FLT100 FLT180 FLT190 FLT260 FLT300 FLT310 FLT340 Amb ient Temp erature (C) NOTE: All specification subject to change without notice. Time- to- tr ip ( S) RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail Sales@rfeinc.com C5EC02 REV 2007.03.1