FRH110-250UF

Radial Leaded PPTC FRH Series FEATURES •Low hold current, Solid state Radial-leaded product ideal for RoHS ü AGENCY RECOGNITION •UL (E211981) •C-UL (E211981) •TÜV (R50004084) up to 60V/250V/600V •Application: Telecommunication and Data transmitting •Operation Current: 0.08A ~ 0.18A •Maximum Voltage: 60V/250V/600V •Temperature Range: -40°C to 85°C ELECTRICAL CHARACTERISTICS (23°C) Part Number FRH080-250UF FRH080-250F FRH110-250UF FRH110-250F FRH120-250UF FRH120-250F FRH145-250UF FRH145-250F FRH180-250UF FRH180-250F FRH150-600F FRH160-600F Hold Current IH, A 0.08 0.08 0.11 0.11 0.12 0.12 0.15 0.15 0.18 0.18 0.15 0.16 Trip Current IT, A 0.16 0.16 0.22 0.22 0.24 0.24 0.29 0.29 0.65 0.65 0.30 0.32 Max. Time Maximum to Trip Current A 0.35 0.35 1.0 1.0 1.0 1.0 1.0 1.0 1.5 1.5 1.0 1.0 Sec 4.0 4.0 2.0 2.0 2.0 2.0 2.5 2.5 10.0 11.0 5.0 7.0 IMAX, A 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 10.0 10.0 3.0 3.0 Max. Oper. Voltage VMAX, VDC 60 60 60 60 60 60 60 60 60 60 60 60 Max. Int. Voltage VI-MAX, V 250 250 250 250 250 250 250 250 250 250 600 600 Resistance Tolerance RMIN R1MAX OHMS 14.0 14.0 5.0 5.0 6.0 4.0 3.5 3.0 0.8 0.8 6.0 4.0 OHMS 33.0 33.0 16.0 16.0 16.0 16.0 12.0 12.0 4.0 4.0 22.0 18.0 IH=Hold current-maximum current at which the device will not trip at 23°C still air. IT=Trip current-maximum current at which the device will always trip at 23°C still air. V MAX=Maximum voltage device can withstand without damage at its rated current. VI-MAX=Maximum interrupt voltage device can withstand for short period of time. (Not for long term.) I MAX=Maximum fault current device can withstand without damage at rated voltage (V MAX). Pd=Typical power dissipated from device when in the tripped state in 23°C still air environment. R MIN=Minimum device resistance at 23°C. R1MAX=Maximum device resistance at 23°C, 1 hour after tripping. Physical specifications: Lead material: FRH080-250~FRH180-250 Tin plated copper, 22 AWG. FRH150-600~FRH160-600 Tin plated copper, 22 AWG. Soldering characteristics: MIL-STD-202, Method 208E. Insulating coating: Flame retardant epoxy, meet UL-94V-0 requirement. Figure 1 FRH PRODUCT DIMENSIONS (MILLIMETERS) NOTE: All FRH products are designed to assist equipment to pass ITU, UL1950 or GR1089 specification. Part Number FRH080-250UF FRH080-250F FRH110-250UF FRH110-250F FRH120-250UF FRH120-250F FRH145-250UF FRH145-250F FRH180-250UF FRH180-250F FRH150-600F FRH160-600F A 4.8 5.3 5.3 5.8 6.0 6.5 6.0 6.5 10.4 10.9 13.5 16.0 B 9.1 9.6 9.4 9.9 10.0 11.0 10.0 11.0 12.6 13.6 12.6 12.6 C 5 5 5 5 5 5 5 5 5 5 5 5 D 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 E Lead Size: 22AWG (0.65mm) Maximum Maximum Typical Minimum Maximum 3.8 4.6 3.8 4.6 3.8 4.6 3.8 4.6 3.8 4.6 6 6 Figure 2 Lead Size: 22AWG (0.65mm) CAUTION: FRH devices are not intended for continous use of Line Voltage such as 120 VAC`600VAC and above. RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail Sales@rfeinc.com C5EB08 REV 2007.03.1 Radial Leaded PPTC FRH Series THERMAL DERATING CURVE RoHS ü Thermal Derating Curve - FRH Series Percent o f Ra ted Ho ld a nd Trip Current 200% 150% 100% 50% 0% -40 -20 0 20 40 60 80 Ambient Temperature (C) TYPICAL TIME-TO-TRIP AT 23°C 1000 100 Time- to- tr ip ( S) 10 1 0.1 G E F D C B A A= B= C= D= E= F= G= FRH080(U)-250 FRH110(U)-250 FRH120(U)-250 FRH145(U)-250 FRH180(U)-250 FRH150-600 FRH160-600 0.01 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 2.2 2.4 2.6 2.8 3 Fault current (A ) CAUTION: FRH devices are not intended for continous use of Line Voltage such as 120 VAC`600VAC and above. NOTE: All Specification subject to change without notice. RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail Sales@rfeinc.com C5EB08 REV 2007.03.1