MR25MPA-10K-F

PACKAGING SPECIFICATIONS Avisert (AV3) & Panasert (PA) Specifications TAPE, AVISERT SPECIFICATIONS (CODE AV3 IN PART NUMBER) Items Body Diameter Body Length Body Bottom to Bend Height Lead-Wire diameter Pitch of component Feed hole pitch Hole center to lead Lead to lead spacing Component alignment Tape Width Hold Down Tape Width Hole Position Hold Down Tape Position Lead Wire Clinch Height Lead Wire Protrusion Feed Hole Diameter Total T ape Thickness Symbol Dimension in mm D 1.8±0.3 A 3.8±0.3 H 7 max d 0.45 P 12.7±1 P0 12.7±0.3 P1 5.7±0.5 F 2.5±1 0±2 Dh W 18+1 W0 12.5 min W1 9±0.5 W2 3 max. H0 16.5 max I 1.0 max. D0 4±0.3 t 0.5±0.2 P Dh Dh D H1 W2 A P1 H W0 P3 W1 P2 Dg W I Dd D0 * Avisert is available in ammo pack only PART NUMBER EXAMPLE MR 25 M AV3 - 10K - F TAPE, PANASERT SPECIFICATIONS (CODE PA IN PART NUMBER) P Items Body Diameter Body Length Hole Cen ter to Seating Plane Lead Wire Diameter Pitch of Component Feed Hole Pitch Hole Center to Lead Body Pitch Lead to Lead Spacing Component Alignment Tape Width Hold Down Tape Width Hole Position Hold Down Tape Position Lead Wire Clinch Height Height from Feedhole Lead Wire Protrusion Feed Hole Diameter Total Tape Thickness Symbol Dimension in mm D A L d P P0 P1 P2 F h W W0 W1 W2 H0 H1 l D0 t 1.3 to 4.5 10 max 11 max 0.45 to 0.85 12.7±1 12.7±0.3 3.85±0.7 6.35±1.0 5.0±0.8 0±2 18 +1.0 -0.5 12.5 min 9±0.5 1.5 max 16±0.5 32 max 1 max 4±0.2 0.5±0.2 A F P1 H1 H0 W2 L W0 W1 W P0 l Dd Dh Dh D0 D W Tt * Panasert is available in ammo pack only. * Lead is not insulated on 1 Watt parts. PART NUMBER EXAMPLE MR 25 M PA - 10K - F RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail Sales@rfeinc.com C2A03 2003.6.3