PPL333K2A

POLYPROPYLENE FILM CAPACITORS PPL Series: Film Foil INTRODUCTION PPL Series are constructed with polypropylene film dielectric, aluminum foil electrode, inductive forming, copperply lead, epoxy resin coating. Compared to other types, the PPL has a lower dielectric absorption and much lower temperature variation in the electrostatic capacitance. They have a much higher insulation resistance and are ideal for use in circuits where a high demand is placed on the Q in RF circuits, and electronic computers. SPECIFICATIONS Type Operating Temperature Range Capacitance Range Capacitance Tolerance Rated Voltage Dissipation Factor Insulation Resistance Performance -40°C ~ +85°C 0.001mF ~ 0.47mF ±2%(G),±5%(J),±10%(K),±20%(M) 50VDC, 100VDC, 200VDC, 250VDC 0.1% max at 1KHz, 25°C C20 000M C 0.1 F, >2 000M • F FEATURES PART NUMBER EXAMPLE PPL 333 K 2A DIMENSIONS mF 0.0010 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 W.V. Code 102 122 152 182 222 272 332 392 472 562 682 822 103 123 153 183 223 273 333 393 473 563 683 823 104 124 154 184 224 274 334 394 474 W 5.8 5.8 5.8 5.8 5.8 5.8 5.8 6.0 6.0 6.0 6.0 6.5 6.5 6.5 7.5 7.5 7.8 7.8 8.0 8.0 9.3 9.7 10.0 10.5 11.5 12.0 12.0 12.0 13.5 14.0 15.5 16.0 18.0 50/100VDC H T P±1 10.5 3.3 3.0 10.5 3.3 3.0 10.5 3.3 3.0 10.5 3.3 3.0 10.5 3.3 3.0 10.5 3.3 3.0 10.5 3.3 3.0 10.5 3.5 3.0 10.5 3.5 3.0 10.5 3.5 3.0 10.5 3.5 3.0 10.5 4.0 3.0 10.5 4.0 3.0 10.5 4.0 3.0 10.5 4.0 4.0 10.5 4.0 4.0 10.5 4.5 4.0 12.0 4.5 5.0 12.0 4.6 5.0 12.5 5.0 5.0 12.5 5.0 6.0 12.5 5.0 6.0 12.5 5.5 6.0 12.5 6.0 7.0 13.0 6.5 7.0 13.0 7.0 7.0 15.0 7.0 7.0 16.0 7.5 8.0 16.0 8.0 8.0 16.0 8.5 8.0 19.0 8.5 10.0 20.0 9.0 10.0 21.0 10.0 10.0 200/250VDC W H T P±1 7.0 11.0 4.0 3.0 7.0 11.0 4.0 3.0 7.0 11.0 4.0 3.0 7.0 11.0 4.0 3.0 7.0 11.0 4.0 3.0 7.0 11.0 4.0 3.0 7.0 11.0 4.0 3.0 7.0 11.0 4.0 3.0 7.0 11.0 4.0 3.0 7.0 11.0 4.0 3.0 7.0 11.0 4.0 3.0 7.0 11.0 4.5 3.0 7.0 11.0 4.5 3.0 7.0 11.0 4.5 3.0 9.0 13.0 5.0 4.0 9.0 13.0 5.0 4.0 9.0 13.0 5.0 4.0 9.0 13.0 5.5 5.0 9.0 13.0 5.5 5.0 11.0 14.0 6.0 5.0 11.0 14.0 6.0 6.0 11.0 14.0 7.0 6.0 12.0 14.0 7.0 6.0 13.0 15.0 8.0 7.0 14.0 15.0 8.0 7.0 14.0 15.0 8.0 7.0 15.0 17.0 8.0 7.0 16.0 18.0 9.0 8.0 18.0 18.0 10.0 8.0 •Low dissipation factor (DF) •High insulation resistance •High stability and reliability •Low equivalent series resistance (ESR) •Inductive construction •Enhanced mechanical strength and moisture resistance epoxy resin •Heat resistance: 240°C±10 (5 sec) 25mm min H max P W max 1.5mm max d±0.05 T max RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail Sales@rfeinc.com C1DD01 REV 2002.06.13