RA220M1CBK050110

ALUMINUM ELECTROLYTIC CAPACITORS RA Series: Radial Very Low Leakage, 105°C FEATURES •105°C, 1000 hours assured. •Very Low leakage current. •Use in high temperature industrial equipment. SPECIFICATIONS Item Operating Temperature Range Capacitance Tolerance Leakage Current (at 20°C) Dissipaton Factor Tan at 120 Hz, 20°C Rated Voltage Tan (max) 6.3 0.24 10 0.21 16 0.16 6.3 4 8 Performance -40°C ~ +105°C ± 20% (120Hz, 20°C) I = 0.002CV or 0.4 (mA) whichever is greater (after 2 minutes). Where, C = rated capacitance in mF. V=rated DC working voltage in V . 25 0.14 10 3 6 35 0.12 16 3 6 50 0.10 25 2 4 63 0.09 35 2 4 Test Time 100 0.08 50 2 3 63 2 3 1000 Hrs When the capacitance exceed 1000 mF 0.02 shall be added every 1000mF. Impedance ratio shall not exceed the values given in the table below. Rated Voltage Low Temperature Characteristics (at 120Hz) Load Life Test (after application of the rated voltage applied for 1000 hours at 105°C) Impedance Ratio Test Time Capacitance Change Dissipation Factor Leakage Current Freq. (Hz) Cap. ( F) 100 2 3 Z(-25°C)/Z(+20°C) Z(-40°C)/Z(+20°C) 1000 Hrs ± 20% Shelf Life Test ± 20% (at 20°C after rated voltage Capacitance Change applied for 1000 hours at Less than 200% of specified value Dissipation Factor Less than 200% of specified value 105°C without voltage applied) Within specified value Leakage Current Within specified value 60(50) 0.75 0.83 0.90 Under 50 2.20 120 1.00 1.00 1.00 70 1.75 500 1.35 1.23 1.12 85 1.58 1K 1.55 1.32 1.10 105 1.00 10K up 1.90 1.45 1.12 Ripple Current & Frequency Multilpiers Under 100 220 to 1000 2200 up above Temperature (°C) Multipliers Riple Current & Temperature Multipliers Standards Satisfies Characteristic W of JIS C 5141 DIMENSIONS AND PERMISSABLE RIPPLE CURRENT Dimension: D×L(mm) Ripple Current: mA/RMS at 120Hz 105°C VDC 6.3V(0J) 10V(1A) 16V(1C) 25V(1E) 35V(1H) 50V(1H) 63V(1J) 100V(2A) F 0.1 0.22 0.33 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 330 470 1000 2200 3300 4700 Code 0R1 R22 R33 R47 010 2R2 3R3 4R7 100 220 330 470 101 221 331 471 102 222 332 472 DXL mA DXL mA DXL mA DXL mA DXL mA DXL 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 mA 1.3 2.9 4.4 7 13 20 25 30 46 68 90 110 180 345 460 610 1530 DXL mA DXL 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 mA 2.6 5.8 8 10 15 23 29 34 56 96 140 180 320 570 700 880 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 6.3 x 11 6.3 x 11 8 x 11.5 10 x 12.5 13 x 20 13 x 20 16 x 25 54 65 95 160 195 270 460 810 960 1330 5 x 11 5 x 11 5 x 11 6.3 x 11 8 x 11.5 8 x 11.5 10 x 16 13 x 20 13 x 25 16 x 25 49 60 70 105 175 245 290 550 860 1100 1400 5 x 11 5 x 11 5 x 11 6.3 x 11 8 x 11.5 8 x 11.5 10 x 12.5 10 x 20 13 x 25 16 x 25 35 54 64 99 125 215 260 370 640 1000 5 x 11 5 x 11 5 x 11 5 x 11 6.3 x 11 8 x 11.5 10 x 12.5 10 x 16 13 x 20 16 x 25 26 38 57 69 82 135 230 335 440 770 1170 5 x 11 5 x 11 5 x 11 5 x 11 6.3 x 11 8 x 11.5 10 x 12.5 10 x 16 10 x 20 13 x 25 16 x 31.5 18 x 35.5 18 x 40 28 41 61 75 100 170 300 400 520 920 1340 1650 1900 5 x 11 5 x 11 5 x 11 6.3 x 11 6.3 x 11 8 x 11.5 10 x 16 10 x 20 13 x 20 16 x 25 18 x 35.5 5 x 11 5 x 11 6.3 x 11 6.3 x 11 8 x 11.5 10 x 12.5 10 x 20 13 x 20 13 x 25 32 50 82 100 135 225 400 540 700 5 x 11 6.3 x 11 8 x 11.5 10 x 12.5 10 x 16 13 x 20 16 x 25 16 x 25 16 x 31.5 1080 16 x 31.5 1210 1300 16 x 31.5 1460 16 x 31.5 1600 18 x 35.5 1780 LEAD SPACING AND DIAMETER jd P jd a b 5 2.0 0.5 1.0 0.5 6.3 2.5 8 3.5 10 5.0 0.6 1.5 13 5.0 16 7.5 0.8 18 7.5 PART NUMBER EXAMPLE RA 220 M 1C BK 050 110 C1CC06 REV 2004.8.31 RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail Sales@rfeinc.com