SSG0R1M1HSA040050

ALUMINUM ELECTROLYTIC CAPACITORS SSG Series: Radial Micro Miniature Size, 105°C FEATURES • 105°C, 1000 hours assured. • Standard micro miniature size with 5mm height. SPECIFICATIONS Item Operating Temperature Range Capacitance Tolerance Leakage Current (at 20°C) Dissipaton Factor Tan at 120 Hz, 20°C Low Temperature Characteristics (at 120Hz) Rated Voltage Tan (max) 4 0.35 Performance -40° ~ + 105°C ± 20% (120Hz, 20°C) I = 0.01CV or 0.3 ( A) whichever is greater (after 2 minutes) Where, C = rated capacitance in F. V=rated DC working voltage in V . 6.3 0.25 10 0.20 16 0.17 4 7 15 25 0.15 6.3 6 12 1000 Hrs 4 ~ 6.3V 10 ~ 50V ± 30% ± 250% Less than 200% of specifiec value Within specified values 1000 Hrs 4 ~ 6.3V 10 ~ 50V ± 30% ± 30% Less than 200% of specifiec value Within specified values 60 (50) 0.75 0.80 120 1.00 1.00 85 1.27 500 1.15 1.08 100 1.00 Satisfies Characteristic W of JIS C 5141 1K 1.34 1.20 10K up 1.50 1.30 The specification shall be satisfied when the capacitors are restored to 20°C after exposing them for 1000 hrs at 105°C without voltage applied. The specification shall be satisfied when the capacitors are restored to 20°C after rated voltage applied for 1000hrs at 105°C. 35 0.13 10 4 8 50 0.10 16 3 6 25 2 4 35 2 4 50 2 4 Impedance ratio shall not exceed the values given in the table. Rated Voltage Impedance Ratio Test Time Load Life Test Capacitance Change Dissipation Factor Z(-25°C) /Z(+20°C) Z(-40°C) /Z(+20°C) Leakage Current Test Time Shelf Life Test Capacitance Change Dissipation Factor Leakage Current Freq. (Hz) Ripple Current & Frequency Multipliers Cap. (mF) Under 33 47 to 220 Ripple Current & Temperature Mutipliers Standards Temperature (°C) Under 70 Multipliers 1.65 DIMENSIONS & PERMISSABLE RIPPLE CURRENT Dimension: D×L(mm); Ripple Current: mA/RMS at 120Hz 105°C VDC mF Code 4V (0G) fD x L mA 6.3V (0J) fD x L mA 10V (1A) fD x L mA 16V (1C) fD x L mA 25V (1E) fD x L mA 35V (1V) fD x L mA 50V (1H) fD x L 4x5 4x5 4x5 4x5 4x5 mA 1 2 2.8 4 7 10 13 20 31 46 0.10 0.22 0.33 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 0R1 R22 R33 R47 010 2R2 3R3 4R7 100 220 330 470 101 221 4x5 4x5 5x5 6.3 x 5 27 34 50 74 4x5 5x5 5x5 6.3 x 5 21 30 36 56 4x5 5x5 5x5 6.3 x 5 6.3 x 5 14 27 34 43 70 4x5 4x5 5x5 6.3 x 5 6.3 x 5 14 23 30 40 48 4x5 4x5 5x5 6.3 x 5 6.3 x 5 6.3 x 5 11 15 27 42 52 58 4x5 4x5 4x5 5x5 6.3 x 5 6.3 x 5 8.7 12 17 27 46 52 4x5 4x5 5x5 6.3 x 5 6.3 x 5 LEAD SPACING AND DIAMETER D P d 3 1.0 0.4 1.0 0.50 4 1.5 5 2.0 0.45 6.3 2.5 PART NUMBER EXAMPLE SSG 0R1 M 1H SA 040 050 C1CE06 REV 2004.8.23 RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail Sales@rfeinc.com