VEZ220M1ATR050053

ALUMINUM ELECTROLYTIC CAPACITORS VEZ Series: Surface Mount Type, Low Impedance FEATURES •105°C, 1000 hours assured •Low Impedance •Smaller size than VEH •RoHS Compliant SPECIFICATIONS Items Operating Temperature Range Capacitance Tolerance Leakage Current (at 20 °C) Dissipation Factor (Tan at 120Hz, 20°C) Performance -55 ° ~ +105 °C C +20% (at 120Hz, 20 °C) I = 0.01CV or 3 (µ A) whichever is greater (after 2 minutes) Where, C= rated capacitance in µF. V= rated DC working voltage in V. Rated 6.3 10 16 25 35 50 Voltage Tan (max) 0.28 0.24 0.2 0.16 0.14 0.12 Impedance ratio shall not exceed the values given in the table below. Rated Voltage 6.3 10 16 25 50 Z (-25 °C)/Z(+20 ° C) 4 3 2 2 2 Impedance Ratio Z(-40 °C)/Z(+20 °C) 8 5 4 3 3 Test Time 1,000 Hrs Capacitance Change Within +25% of initial value Dissipation Factor Less than 200% of specified value Leakage Current Within specified value * The above specifications shall be satisfied when the capacitors are restored to 20 °C after the rated voltage applied for 1,000 hrs at 105 ° C Low Temperature Characteristics (at 120Hz) Load Life Test Shelf Life Test Ripple Current & Frequency Multipliers Standards Test Time: 1000 hrs; other items are the same as those for the load life test. Freq. 10k (Hz) 50, 60 120 1k up V.DC (V) 6.3 ~ 35 0.64 0.8 0.93 1.0 JIS C 5101-1 DIMENSION, IMPEDANCE & PERMISSIBLE RIPPLE CURRENT Dimension: öD x L(mm) Ripple Current mA/rms at 100KHz, 105°C Impedance: W at 100KHz, 20ºC V.DC F 1.0 2.2 3.3 4.7 10 22 33 47 100 150 220 Contents 010 2R2 3R3 4R7 100 220 330 470 101 151 221 6.3V (0J) DxL mA Imp. 10V (1A) DxL mA Imp. 16V (1C) DxL mA Imp. 25V (1E) DxL mA Imp. 35V (1V) DxL mA Imp. 50V (1H) DxL 4 4 4 5 6.3 6.3 6.3 x x x x x x x 5.3 5.3 5.3 5.3 5.3 5.3 7.7 mA Imp. 30 30 30 50 70 70 170 5.0 5.0 5.0 3.0 2.0 2.0 1.0 4 5 5 6.3 6.3 6.3 x x x x x x 5.3 5.3 5.3 5.3 7.7 7.7 65 110 110 170 255 255 3.20 1.50 1.50 0.85 0.50 0.50 4 5 5 6.3 6.3 6.3 6.3 x x x x x x x 5.3 5.3 5.3 5.3 5.3 7.7 7.7 65 110 110 170 170 255 255 3.20 1.50 1.50 0.85 0.85 0.50 0.50 4 5 6.3 6.3 6.3 6.3 6.3 x x x x x x x 5.3 5.3 5.3 5.3 5.3 7.7 7.7 65 110 170 170 170 255 255 3.20 1.50 0.85 0.85 0.85 0.50 0.50 4 5 6.3 6.3 6.3 6.3 x x x x x x 5.3 5.3 5.3 5.3 5.3 7.7 65 110 170 170 170 255 3.20 1.50 0.85 0.85 0.85 0.50 4 5 6.3 6.3 6.3 x x x x x 5.3 5.3 5.3 5.3 7.7 65 110 170 170 255 3.20 1.50 0.85 0.85 0.50 PAD SPACING AND DIAMETER D 4 5 6.3 6.3 5.3 5.3 5.3 7.7 L + + + + 0.2 0.2 0.2 0.3 A 4.3 5.3 6.6 6.6 B 4.3 5.3 6.6 6.6 C 2.0 2.3 2.7 2.7 W P+0.2 0.5 to 0.8 1.0 0.5 to 0.8 1.5 0.5 to 0.8 2.0 0.5 to 0.8 2.0 0.3 max B + LW A C P C PART NUMBER EXAMPLE VEZ 220 M 1A TR 050 053 RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail Sales@rfeinc.com C1CB10 REV 2007.7.3